Trending February 2024 # 0X000000Ef, Critical Process Died Error In Windows 11/10 # Suggested March 2024 # Top 3 Popular

You are reading the article 0X000000Ef, Critical Process Died Error In Windows 11/10 updated in February 2024 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 0X000000Ef, Critical Process Died Error In Windows 11/10

If a critical Windows system process fails to run properly, your operating system will crash and display a Critical Process Died Stop Error 0x000000EF or Blue Screen on your Windows 11/10/8/7 computer. This happens because the process which was needed to run the Windows operating system ended abruptly for some reason.

There is not much documentation on this on any Microsoft site. A post however simply states that:

The CRITICAL_PROCESS_DIED bug check has a value of 0x000000EF. This indicates that a critical system process died.

Fix CRITICAL PROCESS DIED Blue Screen on Windows

Now if you receive a CRITICAL_PROCESS_DIED error message, here are some of the things you could try and see:

Run Hardware and Devices Troubleshooter

Run Driver Verifier Manager

Run System File Checker

Run DISM

Update your Drivers

Perform Clean-boot troubleshooting

Use System Restore

Disable Sleep and Hibernate

Update BIOS or firmware

Run Startup Repair

Check the System Log in Event Viewer

Run Windows Blue Screen Troubleshooter.

If your Windows will not boot to the desktop, you need to enter Advanced Startup options or boot into Safe Mode and then access the required tools.

1] Run Hardware and Devices Troubleshooter

Run the Hardware and Devices Troubleshooter and see if that helps.

2] Run Driver Verifier Manager

Run the Driver Verifier Manager and see if it helps troubleshoot, identify & resolve the device driver problems.

3] Run System File Checker

Run sfc /scannow or System File Checker to check for and replace corrupted system files if any. If you are unable to boot to the desktop, you may run System File Checker in Safe Mode or Offline.

4] Run DISM

You may also want to run DISM to repair a corrupt system image.

5] Update your Drivers

Open Devices Manager and see if any devices are marked with the exclamation mark. Update your Drivers and see if that resolves the issue. Did you install any new device or hardware recently? Disable, remove, or uninstall it and see if it helps.

6] Perform Clean-boot troubleshooting

Perform a Clean Boot. When you start the computer in clean boot, the computer starts by using a pre-selected minimal set of drivers and startup programs. Clean-boot troubleshooting is designed to isolate a performance problem.

7] Use System Restore

If the problem started appearing recently, use System Restore to restore your computer back to a good point and see if it makes the problem go away. If it started after you updated your operating system, you may want to stop that particular update from being installed, and report the problem to Microsoft.

8] Disable Sleep and Hibernate 9] Update BIOS or firmware

See in an update to your system BIOS or firmware is available.

10] Run Startup Repair

If you are unable to boot into Windows, you may want to run Startup Repair from the Advanced Startup options.

Once you are able to access the desktop, you may continue with troubleshooting the issue.

If you are unable to boot into Windows or to the Advanced Startup Options, then you may have to use a Windows installation or recovery disc, to carry out your troubleshooting.

11] Check the System Log in Event Viewer

Check the System Log in Event Viewer and see if and error messages point you in the direction to troubleshoot.

Read: A critical error has occurred and the process must be terminated

12] Run Windows Blue Screen Troubleshooter

Run the online Windows Blue Screen Troubleshooter from Microsoft is a wizard that is meant to help novice users fix their Stop Errors. It will help you fix this Blue Screen error and offers helpful links along the way.

If nothing helps, check this post which shows you some generic ways on how to troubleshoot Blue Screens in Windows.

Is Critical Process Died a virus?

Critical Process Died is not a virus. It is a Blue Screen of Death (BSOD) error. There are many causes of a BSOD error on Windows 11/10. Most commonly it occurs due to system failure. When OS reaches a critical condition where it can no longer operate safely, Window displays a BSOD error to prevent damage to other hardware components.

How do I fix Blue Screen of Death error?

You can use some common solutions to fix BSOD errors, like updating drivers, uninstalling the recently installed software, performing a hardware clean boot, running a system restore, etc. You should also check the BSOD log file to troubleshoot it properly.

All the best!

See this post if you receive a Kernel Security Check Failure error in Windows 11/10.

You're reading 0X000000Ef, Critical Process Died Error In Windows 11/10

Audio Services Not Responding Error In Windows 11/10

The error Audio services not responding is an error message generated via the Playing Audio Troubleshooter which is usually run when you are experiencing problems with your sound or audio devices. This error usually means that your sound device is in an unresponsive where it isn’t responding to your computer’s commands or messages. In this post, we will identify the possible cause of this issue, as well as provide the appropriate solutions you can try to help you resolve the issue as quickly as possible.

This error message is a very common error and usually occurs when you upgrade your version of Windows 10 via Windows Update. There are a few workarounds which include making sure that all the audio services are running as expected and the drivers are updated to the latest build.

Audio services not responding in Windows 11/10

If you’re faced with this error message Audio services not responding issue, you can try our recommended solutions in the order presented below and see if that helps to resolve the issue.

Restart Audio Services

Check audio components

Run the add networkservice & add localservice commands

Install default sound drivers

Install Realtek or High Definition Audio Device

Run Audio and Sound troubleshooter

Run the SFC and DISM scan

Perform System Restore

Perform a Fresh Start, In-place upgrade repair or Cloud Reset

Let’s take a look at the description of the process involved concerning each of the listed solutions.

Before you jump into any of the solutions, first connect the device to a different USB port. The problem may not occur if the device is connected to a different USB port.

1] Restart Audio services

Alongside your sound hardware and drivers, there is an audio service present which is responsible for managing the audio on your computer. In this solution, a simple restart might reboot its configurations and solve the issue.

If that does not help, you may need to restart the Audio-related Services manually.

You should ensure that its Dependency Services are started and have Automatic Startup type:

Remote Procedure Call

Windows Audio Endpoint Builder

If the Multimedia Class Scheduler Service is present on your system, that too should be Started and set on Automatic.

Read: The Audio Service is not running.

2] Check audio components

This solution requires you to make sure that all the audio components are running. If any of them isn’t, it may cause the issue. Also, if you’re running third-party security software on Windows 10, temporarily disable it the program as they sometimes block some critical services like the audio service.

To check audio components, do the following:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type chúng tôi and hit Enter to open Services window.

RPC Endpoint Mapper

Remote Procedure Call (RPC)

DCOM Server Process Launcher

Also, make sure that all these services are set to start as Automatic.

Restart the computer.

On boot, check to see if the issue is resolved. If not, continue with the next solution.

3] Run the add networkservice & add localservice commands

To run the add networkservice & add localservice commands, do the following:

Press Windows key + R.

In the Run dialog box, type cmd and then press CTRL + SHIFT + ENTER to open Command Prompt in elevated mode.

In the command prompt window, copy and paste the command below and hit Enter.

net localgroup Administrators /add networkservice

Once the command executes, copy and paste this next command and hit Enter.

net localgroup Administrators /add localservice

Exit CMD prompt and restart your computer.

On boot, check to see if the issue is resolved. If not, continue with the next solution.

4] Install default sound drivers

As Windows operating system keeps upgrading over time, the sound drivers are also included in most of the packages and they also get updated periodically. Windows 10 has a basic default sound driver already saved so whenever you uninstall your current drivers, Windows 11/10 recognizes the hardware connected and installs the driver accordingly.

In this solution, you can try installing the default audio driver on your system and see if that resolves the issue.

Here’s how:

Press Windows key + R.

In the Run dialog, type control system and hit Enter to open System window.

Select the radio button for No (your device might not work as expected) option.

Note: If this solution doesn’t work, make sure to change the option back to Yes.

Next, press Windows key + X to open the Power User Menu.

Tap M on the keyboard to open Device Manager.

In the Device Manager, expand the Sound, video, and game controllers category.

Check the uninstall driver checkbox to uninstall the driver as well and proceed with the uninstallation.

Reboot your computer.

Your computer will now detect the audio hardware on your computer and automatically install the default drivers present on your computer.

If the issue persists, continue with the next solution.

Read: One or more audio service isn’t running.

5] Install Realtek or High Definition Audio Device

Some users reported that they were able to solve the issue by installing High Definition Audio Device driver instead of IDT High Definition Audio CODEC.

To install the Realtek or High Definition Audio Device driver, do the following:

Open Device Managercontrol panel applet

In the Device Manager, expand the Sound, video, and game controllers category.

On the How do you want o search for drivers? dialog, select Browse my computer for driver software.

Now select Let me pick from a list of available drivers on my computer.

Uncheck the Show compatible hardware option to ensure that all the results are listed in your drivers’ list.

Scroll through all the drivers until you find High Definition Audio Device.

Follow the on-screen instructions to complete the installation.

Restart your computer.

On boot, check to see if the issue is resolved. If not, continue with the next solution.

Note: If this doesn’t work, try downloading the audio drivers from the device manufacturer’s website and install it. In most cases, this also solved the problem.

6] Run Audio troubleshooter

Run the Audio or Sound troubleshooter. Windows 10 already includes Playing Audio Troubleshooter and Recording Audio Troubleshooter, which you can easily invoke via the Control Panel, the Taskbar Search or the Troubleshooters tab of our freeware FixWin. You can also access the Troubleshooters Page in Windows 11/10.

7] Run the SFC and DISM scan

If you have system file errors, you may encounter the Audio services not responding issue. In which case, you can run the SFC/DISM scan – a utility in Windows 10 that allows users to scan for corruptions in Windows system files and restore corrupted files.

After the scan and the issue is unresolved, continue with the next solution.

8] Perform System Restore

If you have no idea what changed that might have ended up breaking the audio service, you can perform System Restore (any changes like application install, user preferences, and anything else made after the restore point will be lost) to revert to date before when you started encountering the Audio services not responding issue

9] Perform a Fresh Start, In-place upgrade repair or Cloud Reset

At this point, if the Audio services not responding issue is still unresolved, it’s most likely due to some kind of system corruption that cannot be resolved conventionally. In this case, you can try Fresh Start, In-place upgrade repair to reset every Windows component. Also, you can try Cloud Reset and see if that helps.

Hopefully, any of these solutions will work for you!

Full Fix: Mom.implementation Error In Windows 10/11, 7

Full Fix: MOM.Implementation Error in Windows 10/11, 7

816

Share

X

Some users complained that every time they start Windows, they encounter the MOM.Implementation error.

You need to install the latest versions of the .NET Framework and Catalyst Control Center.

Make sure you also roll back or uninstall the graphics card driver.

Find and remove problematic updates by following our step-by-step guide below.

MOM.Implementation error is an annoying error that keeps showing every time you start your Windows, and if you’re experiencing this error, today we’re going to show you how to resolve it on Windows 10.

How to Fix MOM.Implementation Error Windows 10

MOM.Implementation error can be quite annoying, and speaking of this error, here are some similar issues that users reported:

Solution 1 – Install the latest .NET Framework and Catalyst Control Center

Catalyst Control Center relies on .NET Framework, so if you’re experiencing any issues it’s always a good idea to update your .NET Framework. As for the latest .NET Framework, you can download it from here.

Simply visit the website, go to the Drivers section and locate the model of your graphics card on the list. After doing that, download and install the latest driver. We also recommend using a specialized software to automatically download all the outdated drivers on your PC.

If updating the .NET Framework and Catalyst Control Center doesn’t work, uninstall them both and then install them again.

In order to manage any of your drivers accordingly, it’s more helpful to update drivers automatically using a dedicated driver update tool, DriverFix.

Using automated support, you can improve your system performance by getting the latest driver versions and avoiding errors from incompatible drivers.

Solution 2 – Disable Catalyst Control Center from Startup

This is quite simple to do, and you can do it by following these steps:

Open Task Manager. You can open it by pressing Ctrl + Shift + Esc on your keyboard.

When Task Manager opens go to Startup tab.

Find the Catalyst Control Center and GU Options and disable them.

Restart your computer and MOM.Implementation error should be gone.

We don’t know how disabling your Catalyst Control Center and GU Options will affect your computer, but if there are changes in performance or any other problems maybe you should enable Catalyst Control Center and GU Options. If you want to enable them, you should know that the process is almost identical, so you’ll be able to do it with ease.

Solution 3 – Download AMD FirePro Control Center

This solution applies to users that are using AMD FirePro display adapter. If you own an AMD FirePro device, go to AMD’s website and download the latest AMD FirePro Control Center. Users have reported that after switching to AMD FirePro Control Center that the MOM. Implementation error was resolved.

Solution 4 – Roll back or install the default driver

Sometimes MOM.Implementation error can occur if there’s an issue with your AMD drivers. According to users, Windows can sometimes update the driver on its own, and that can cause this and other errors to appear.

Expert tip:

In case the Roll Back Driver button isn’t available, you can try removing the driver. To do that, follow these steps:

Windows will now install the default driver and the issue should be resolved. If installing the default driver fixes the problem, you should try downloading the latest drivers from the AMD’s website.

Solution 5 – Remove Catalyst Control Center

In some cases MOM. Implementation error can appear due to issues with the Catalyst Control Center. To fix the problem, some users are suggesting removing the Catalyst Control Center from your PC. There are several ways to do that, but the most effective would be to use an uninstaller.

Uninstaller software will remove the selected application along with all of its files and registry entries, so it will be as if the application was never installed on your PC. Once you remove the Catalyst Control Center, check if the problem is still there.

Thus, to uninstall problematic programs from your PC entirely with all its leftover files, we suggest choosing the best uninstaller software out there.

If you want, you can try updating your drivers to the latest version and check if the issue reoccurs.

If any updates are available, they will be downloaded automatically in the background. Once the updates are downloaded, you just have to restart your PC in order to install them. After doing that, your system will be up to date and the issue should be gone.

Solution 7 – Perform a Clean boot

Sometimes third-party applications can cause MOM.Implementation error to appear. Some applications will start alongside your PC and cause this issue as soon as your PC starts. However, you might be able to fix that by performing a Clean boot. You can do that by following these steps:

Once your PC restarts, check if the problem is still there. If the issue doesn’t appear, repeat the steps from above, but this time enable applications and services one by one or in groups. By doing so, you’ll be able to find the cause of the problem and remove it.

Although keeping your PC up to date is important for your security, some users claim that MOM.Implementation error started appearing after a bad Windows update. To fix this problem, you need to find and remove the problematic updates. You can do that by following these steps:

Once you remove the problematic update, the issue should be resolved. Keep in mind that Windows 10 tends to install updates automatically, so you’ll need to block Windows from installing automatic updates in order to permanently fix this issue.

MOM. Implementation errors can cause a lot of issues on your PC, but you should be able to fix this problem using one of our solutions.

Was this page helpful?

x

Start a conversation

Fix: Windows 10/11 Error Applying Security

FIX: Windows 10/11 error applying security

4

Share

X

The Windows 10 error applying security is

usually caused by incorrect security settings.

You can also get the

error while trying to create or save a new file directly on your hard drive.

A good idea to solve this problem is to create a new user account and try to fix your profile.

You can also take ownership of the specific folder in Windows as instructed in our guide.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

When you get a Windows 10 apply security error, the issue is usually caused by incorrect settings, or, when you are not the owner of the content you’re trying to access.

Another variation of the same error comes with the following message: An error occurred while applying security information to Windows 10.

The same error pops up when you try to save or create a new file on your main drive directly, which essentially is saying you have no permission to create or edit your files even if you’re an admin in Windows 10.

Admin accounts are heavily limited as to what you can do even if your User Account Control settings are on the lowest level possible.

This article looks at the various other solutions so you can try and see which one helps.

How can I fix the applying security error in Windows 10? 1. Create a new user account

1.1 Create another user account

If the issue is resolved in the new profile, then it may mean your other user profile is corrupted, you need to fix the profile.

1.2 Fix your profile

Some Windows operating system files are usually under the ownership of the system by default as these are the core files needed for the smooth running of the OS.

Other files and folders like pictures, videos among others, are under the owner’s name (the current person logged in as user or admin).

Expert tip:

2. Change security settings to open the folder

This will change all the permissions for the child accounts and will prevent the security error from Windows.

If the security settings block you from downloading a file from the Internet, check out this expert article that will help you fix the problem quickly.

3. Change Permissions

Did you accidentally deleted the Admin account? Here’s a great guide that will help you fix that.

4. Allow permission to Full Control

4.1 Manually change permissions to Full Control

4.2 Use Command Prompt to take ownership

The above process lets you take ownership of the folder and then assigns the Admin group Full Control of the Permissions folder.

If you can’t run Command Prompt as administrator, here’s a helpful guide that will help you solve the problem right away.

5. Use UAC setting to change privileges

A notification will pop up saying You must restart your computer to off User Account Control.

Restart your computer, and you’re good to go! You can now add, change or edit your files without receiving Windows 10 error applying security, or other permission errors.

However, you need to note that if the UAC is turned off, some potentially bad programs can run without your permission, but these can be thwarted if your security software is up to date.

Was this page helpful?

x

Start a conversation

Interrupt Exception Not Handled Bsod Error In Windows 11/10

After an upgrade to a newer version of Windows or after you update Windows to the latest build or after you have installed new software or hardware, you may get the INTERRUPT_EXCEPTION_NOT_HANDLED BSOD error when you boot your Windows 11 or Windows 10 system. For some, reportedly, the issue occurs multiple times on shutdown. This post offers solutions to help affected PC users resolve the issue.

This bug check has a value of 0x0000003D. This error indicates that the exception handler for the kernel interrupt object interrupt management was not able to handle the generated exception.

Fix INTERRUPT EXCEPTION NOT HANDLED BSOD error

If you have encountered the INTERRUPT EXCEPTION NOT HANDLED Blue Screen error on your Windows 11/10 computer after you installed a new update, upgraded to a more recent version of Windows, or installed new hardware/software, then these fixes we have provided below can be applied to resolve the issue on your system.

Delete specific files and obsolete registry entries (if applicable)

Run the online Blue Screen Troubleshooter

Run Windows native system repair utilities

Run Driver Verifier

Update drivers

Cleanup leftovers of the last Windows build

Perform System Restore, Uninstall the Update, Rollback the Upgrade

Let’s see these fixes in detail. Before you proceed, if this error occurs and Windows is not updated on your device, we suggest you check for updates and install any available bits including relevant Optional Updates and see if that solves your problem.

To carry out these tasks, if you can log in normally, good; else you will have to boot into Safe Mode, enter the Advanced Startup options screen, or use the Installation Media to boot your device.

1] Delete specific files and obsolete registry entries (if applicable)

For some affected PC users that encountered the INTERRUPT EXCEPTION NOT HANDLED BSOD error, reportedly, they were able to resolve the issue by deleting specific files relating to a ‘Creative Tech’ software residing on their computer and also deleting obsolete registry entries.

First, boot your computer in Safe Mode. In the system state, navigate to the directory below:

C:WindowsSystem32

At the location, find and delete the following files:

APOIM32.EXE

APOMNGR.DLL

CMDRTR.DLL

Exit File Explorer when done. Now, navigate or jump to the registry key path below:

For 32-bit systems

HKEY_LOCAL_MACHINESOFTWARECreative TechSoftware InstalledAPOIM HKEY_LOCAL_MACHINESOFTWARECreative TechInstallationCTRedistAPOIM

For 64-bit systems

HKEY_LOCAL_MACHINESOFTWAREWow6432NodeCreative TechSoftware InstalledAPOIM HKEY_LOCAL_MACHINESOFTWAREWow6432NodeCreative TechInstallationCTRedistAPOIM

At the location delete the APOIM registry value. Once done, boot your computer normally and see if the issue is resolved. If not, continue with the next fix.

2] Run the online Blue Screen Troubleshooter

You can run the Blue Screen Troubleshooter from Microsoft and see if that helps. This automated tool is pretty handy and is primarily designed to help beginners & novice users troubleshoot their Blue Screens and fix the stop error automatically.

Read: KMODE EXCEPTION NOT HANDLED Blue Screen

3] Run Windows native system repair utilities

The Windows native system repair utilities that you will need to run in this case include the following:

Startup Repair. As the name implies, this will quickly fix the most common issues that may be preventing your computer from booting into the operating system.

SFC (System File Checker) scan. This will repair corrupt or damaged system files which can trigger this error.

CHKDSK. This will repair bad sectors which could be triggering the error as well.

After you must complete each task, check to see if the issue is resolved or not. If none of the repair tools didn’t help, you can proceed with the next fix.

4] Run Driver Verifier Manager

This solution requires you to run Driver Verifier Manager on your Windows 11/10 device. You will get a message about the status of each driver – follow the onscreen instructions to fix the problem.

Read: Fix SYSTEM THREAD EXCEPTION NOT HANDLED (PCI.sys) error

5] Update drivers

You can use DriverView to display a list of all device drivers on your system. For the drivers that need updating, you can:

Depending on your PC, update drivers and firmware using the proprietary software:

You may also consider the following:

Using a third-party free Driver Update Software.

Get the driver updates (if available) on the Optional Updates section under Windows Update.

If you have already downloaded the .inf or .sys file for the driver, you can manually update drivers via Device Manager or Command Prompt.

6] Cleanup leftovers of the last Windows build

After a successful Windows version upgrade, you can manually run the batch file and Windows update cleanup to have your Windows installation in pristine condition. To do this, you need to create a batch file using the code below and then run the .bat file. Here’s how to:

Press Windows key + R to invoke the Run dialog.

In the Run dialog box, type notepad and hit Enter to open Notepad.

Copy and paste the syntax below into the text editor.

fsutil resource setautoreset true c:&fsutil usn deletejournal /d /n c:&Dism.exe /online /Cleanup-Image /StartComponentCleanup&sfc chúng tôi /Online /Cleanup-Image /RestoreHealth&sfc chúng tôi /Online /Cleanup-Image /StartComponentCleanup /ResetBase&winsat formal&pause

Save the file with a name and append the .bat file extension – eg; AfterVersionUpgradeCleanup.bat on the Save as type box select All Files.

This manual operation essentially cleans up the component store(WinSxS) of obsolete unneeded .dll, and .exe portions of API. It also checks your system for missing Windows files & folders and replaces them if possible. The WinSAT (Windows System Assessment Tool) portion of the syntax runs a test on your hardware, so Windows can make adjustments to its under-the-hood settings, which include checking your drives speed, determining if the drive(s) is HDD or SSD, and can then select defragmenting or retrim, test your CPU so Windows can set processor affinity and priorities, and so on.

Read: SYSTEM THREAD EXCEPTION NOT HANDLED (ldiagio.sys) BSOD

7] Perform System Restore, Uninstall the Update, Rollback the Upgrade

If at this point the issue is unresolved, then you will need to use the System Restore feature to return your system to an earlier point in time before the error started occurring on your computer. Alternatively, you can uninstall any recent update before the issue surfaced or roll back the Windows upgrade as the case may be.

Any of these solutions above should work for you! Otherwise, you may consider resetting your PC.

Also read: SYSTEM THREAD EXCEPTION NOT HANDLED (CMUSBDAC.sys) Blue Screen

What does stop code KMODE_EXCEPTION_NOT_HANDLED mean?

The KMODE_EXCEPTION_NOT_HANDLED bug check has a value of 0x0000001E. The bug check indicates that a kernel-mode program generated an exception that the error handler didn’t catch. If you encounter this error on your Windows 11/10 computer, then you can resolve the issue by following the suggestions we have provided in the linked guide above in this post.

What is SYSTEM_THREAD_EXCEPTION_NOT_HANDLED?

The SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug check has a value of 0x0000007E. This bug check indicates that a system thread generated an exception that the error handler didn’t catch. To resolve the issue on your PC, the recommended fixes provided in the linked guide(s) above in this post should help. Keep in mind that the instance of the error varies as a specific driver file is usually referenced.

Read: The computer has rebooted from a bugcheck.

Fix Backup Error 0X81000033 On Windows 11/10

Have you come across a 0x81000033 error? It occurs when a system image is included in the ongoing backup. The system image backup fails when the recovery petition size is insufficient. It also occurs due to the following conditions:

Installation of too many language packs on the computer.

Outdated device drivers.

System protection turned off.

Too much disk space by USN Journal.

How to fix the 0x81000033 backup error?

Here are a few solutions that will help you fix this error on Windows 11/10.

Using Disk clean-up tool

Removal of unnecessary language packs

Ensure that the system protection is turned on

Update the outdated Device Drivers

Remove USN Journal

Inspect the hardware

Increase System Reserved Partition size

Let us look at these solutions in more detail.

1] Using Disk clean-up tool

One of the reasons for backup error is inadequate storage space. In such a case, you can then go and check the current free space on the root drive. If the display space is filled more than 85% or more, then you can opt for the Disk Cleanup tool to free up unnecessary cache, old Windows installation, temp files, etc. Once the same is complete, you need to restart the PC. After you restart the PC, please try to create a system back up again. If you are still facing the same problem, you can try the next solution.

2] Removal of unnecessary language packs

By default, there is only one language pack installed on Windows 11/10. But, sometimes you may accidentally mark the checkboxes while installing optional updates which will result in the installation of too many language packs. This will result in loss of disk space and prevents the system from creating the restore point. You can do the same with the following steps:

A] Opening Time and Language options:

B] Setting up the language section:

You can then restart the desktop and see if you can create a system backup.

3] Ensure that the system protection is turned on

Please note that this solution is applicable only when the system protection is disabled on your PC. You can turn on the system protection with the following steps:

A] Opening the System Protection:

B] Configuring the system properties:

The system will launch its properties window. Under the System Properties, choose the root drive followed by Configure.

You can then check the radio button, “Turn on the system protection.”

4] Update the outdated Device Drivers

Outdated/obsolete device drivers can also invoke the error code while creating a system image. You can verify the same with the following steps:

A] Checking the updates:

The system will then connect to Microsoft servers and look for optional updates available for your device.

B] Getting the updates:

Once the download is complete, you can install the checked-in drivers.

5] Remove USN Journal

Presently, all disk drives are formatted with NTFS and include a unique feature called the USN Journal. It is an updated sequence number that maintains a record of all recent changes made on the root drive. Every day some data is added to the journal since we make several changes to the devices. Once the USN journal exceeds the permissible limit, you may be affected by the 0x81000033 error. To delete a USN Journal, follow the next steps:

A] Formatting the hard disk partitions:

Once this is opened, you can change the drive letter of the System reserved volume. You can then launch the CMD as administrator and run the following codes:

fsutil usn queryjournal F: fsutil usn deletejournal /N /D F:

B] Changing the Drive path command:

6] Inspect the hardware

If the backup error persists, you can check if the hard disk is functioning properly on your PC. Follow the given below steps.

A] Launching command prompt as an administrator:

Press Win + R. Type “CMD” and then press Ctrl + Shift + Enter to launch Command Prompt as an administrator. You can then confirm Yes in the UAC window to confirm access to the console.

On the prompt window, type the following and press Enter:

chkdsk C: /f /r.

The command will not run as the root drive since it is already in use. Type “Y’ and press Enter to confirm the code.

B] Getting a report on the hard disk:

Reboot the PC after leaving the command prompt window.

You can then receive a report mentioning whether you can still use the hard disk or if it requires a replacement.

7] Increase System Reserved Partition size

In case the error occurs because of less disk space in the System Reserved Partition, you should try to increase the disk space. Also, you cannot increase the said size normally. You can create a new system volume and allocate it as the new System Reserved Partition. You can do the same with the following steps:

1] You need to first decide the drive letter for the newly created system volume. Press Win + E to start File Explorer and check all pre-existing letters.

Launch the Command Prompt window as an administrator.

2] On the elevated window, copy the following and hit Enter: chúng tôi /s C:Windows /s G: (In this code, “C” is the root drive, and “G” is the letter for the newly created system volume.

3] You can then execute the following commands.

DISKPART

4] After running the codes, you can restart the PC and see if the error is resolved.

With the several solutions mentioned above, we hope you resolve the Backup 0x81000033 error. You can try again to create a system backup after rebooting your PC. We hope you find this useful. Do let us know in case of any suggestions.

What is Windows Stopcode?

The Windows Stopcode provides details about why the system is suddenly dead. It is also known as bug check and includes every type of Windows error that the PC may encounter.

Related: The backup failed with 0x80780119 error.

How do you know if the system protection is enabled?

Update the detailed information about 0X000000Ef, Critical Process Died Error In Windows 11/10 on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!