Trending November 2023 # Device Driver Descriptor Request Failed On Windows 10 (Error Fixed) # Suggested December 2023 # Top 20 Popular

You are reading the article Device Driver Descriptor Request Failed On Windows 10 (Error Fixed) updated in November 2023 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Device Driver Descriptor Request Failed On Windows 10 (Error Fixed)

Device Driver Descriptor Request Failed On Windows 10 (Error Fixed)

It is evident to know that the “USB device descriptor request failed” error is caused mainly by an out-of-date or a faulty device driver. In such cases, you should always choose a driver updater software. One of the best driver updater software available in the market is Smart Driver Care

Advanced Driver Updater is a nifty tool that scans your entire Windows 10 PC for all the incompatible or out-of-date drivers and updates them. So if you are facing an unknown USB device descriptor request failed error, download Smart Driver Care, and resolve the problem in no time.

What is a Device Descriptor?

In common language, a device descriptor encompasses all the information about the USB device. To work properly, each USB device should be able to provide the Operating System with a correct device descriptor, i.e. the correct and complete information about the USB device.

idVendor: This is commonly known as Vendor ID and is assigned to every company that manufacturers USD drives.

Idproduct: This is the product ID assigned to the products manufactured by different vendors and is represented by a 16-bit digit.

Probable Reasons Behind Unknown USB Device Descriptor Request Failed Error:

Now that we know what USB device descriptions are, let’s see the common reasons behind a request for the USB device descriptor failed error.

A faulty USB device driver.

An out-of-date USB driver.

Out-Of-Date BIOS.

USB driver infected by malware or virus.

USB driver is not found and hence cannot interact with the Operating System.

USB Device Descriptor Request Failed Error Fixed:

Let’s continue reading about the different methods using which you can easily resolve device descriptor request failed windows 10 error. Before heading to the more technical solution, we will be going through the easy hacks to resolve the error.

Disconnect the USB device, Restart your Windows 10 PC and then connect the USB drive again to see if the problem is resolved.

Try plugging the USB Flash Drive to another USB port and see if it works.

Try to use the USB drive on a different PC to check if there is a problem with the device driver or the device.

Try removing the main power of the PC and then plugging it again.

These are some common resolutions for USBdevice_descriptor_failure. However, if none of the above workarounds work, you can proceed to the next step.

Also Read: How to Fix Realtek HD Audio Manager Missing from Windows 10

Reinstall The USB Device Driver:

In case the above solution vent in vein and you still get the device descriptor request failed windows 10 error, you can try reinstalling the device driver. To do so:

On your Windows 10 PC, open the Device Manager by typing Device Manager in the Search bar and press Enter.

Here, you will find a Yellow Exclamation mark associated with the faulty USB Device Driver.

Restart the device, attach the USB.

Post this navigate to Device Manager again and let Windows, download the driver automatically or do it through the vendor’s site manually.

Well, this was how to solve an unknown USB device descriptor request failed error manually. However, if you do not have time and expertise to do it on your own, you can simply choose one of the best driver updater software available and let them do the work for you.

Update the USB Device Driver With Smart Driver Care:

Smart Driver Care by Systweak Software is a one-stop solution to all the driver-related problems you face with your Windows 10 PC. It effectively scans for all the faulty/incompatible/out-of-date drivers and updates them with minimal effort.

You can download the free version of Smart Driver Care and update the faulty drivers one by one or choose to purchase the fully functional version and update them all at once.

Follow the steps below to resolve Device Driver Descriptor request failed On Windows 10 error.

Download Smart Driver Care and install it.

After you have downloaded the latest driver, Restart your Windows 10 PC.

So guys this was how you can easily resolve Device Driver Descriptor Request Failed Error On Windows 10. While many of us can do it manually, others may choose to simply use a third-party software to do the work for them.

Next Read:

Show/Hide WhatsApp Status.

Find Someone On Snapchat Without Username

How To Split Screen In Android.

Quick Reaction:

About the author

Pragya Dani

You're reading Device Driver Descriptor Request Failed On Windows 10 (Error Fixed)

Fix You Need A Wia Driver To Use This Device Error On Windows 11/10

Many Windows users while connecting a scanner, printer, or some other device to their Windows computer are receiving the following error:

You need a WIA driver to use this device. Please install it from the installation CD or manufacturer’s website and try again.

This error stops your computer from installing the required driver of a device that you have plugged into it. In this article, we are going to see some of the solutions to fix the error effortlessly.

What is a WIA driver?

Windows Image Acquisition (WIA) driver is used by your Operating System to make graphics applications such as Photoshop to communicate with imaging devices such as Printer and Scanner.

If you are getting this WIA driver error message then there must be something wrong with this diver. It can either be outdated, corrupted, or missing.

Fix You need a WIA driver to use this device

If you see “You need a WIA driver to use this device” error message, then the following solutions will help you fix the problem:

Start WIA Service

Update WIA driver

Reinstall WIA driver

Let us talk about them in detail.

1] Start WIA Service

Before concluding that there’s something wrong with the hardware, we should check if the Windows Image Acquisition Service is enabled. To do that, you need to follow these steps.

Launch Services from the Start Menu.

Even if it’s startes, you can restart it and check if that helps.

Now, reboot your computer and check if the issue is fixed.

2] Update WIA driver

If the WIA service on your computer is working fine, try updating WIA and see if it fixes the issue. You can visit your Scanner or Printer manufacturer’s website and download and install the latest driver software from there. Install it and check if the WIA driver issue is fixed.

3] Reinstall WIA driver

If updating didn’t help, try reinstalling WIA driver. This will help if your driver software is corrupted. To uninstall the WIA driver, you can follow the given steps.

Once your driver is uninstall, detach and attach Scanner from the peripherals and check as it will automatically install the required driver.

To do that and check if the issue is fixed.

Some users have asked questions that need to be addressed regarding this error. So, let us answer them.

How do I get WIA driver?

You can easily download WIA Software from the CD/DVD that you get with your Scanner. If for some reason, you don’t have the disk, you can look for the driver for your particular model from the manufacturer’s website.

What is the difference between TWAIN and WIA scanning?

WIA only works on Windows, whereas, TWAIN is built as a universal driver, meant to work on all OS. So, if an imaging device is built for Windows, then only it will use WIA.

They have a different way of doing things, such as WIA uses a common dialog box, whereas, TWAIN uses the one created by the manufacturer.

If you are scanning in Duplux Mode, TWAIN restricts you from using the same setting for both sides, whereas, WIA has no such restrictions.

So, now you know the difference between these two imaging drivers.

Fixed: Vudu Player Is Not Working On Windows 10

FIXED: VUDU Player is not working on Windows 10

689

Streaming services are at the peak, with a few big players and numerous small but still popular services. And one of the specialized services quite popular in the United States is VUDU, with an amazing selection of movie titles. However, it does have a few issues, as the Windows 10 app is subpar and the web-based player is frequently malfunctioning. We conducted research and provided you with the most common troubleshooting steps in case VUDU player is not working on Windows 10.

How to troubleshoot VUDU player issues on Windows 10 Solution 1 – Clear browser cache

Firstly, double-check your connection and make sure you’re using a wired one. An ethernet connection is always a preferable option over Wi-Fi, especially when streaming.

In addition, disable all VPN/proxy solutions as they seemingly won’t work with VUDU. If you’re from an unsupported area, you’ll hardly be able to use it.

Since there are two ways you can access the VUDU player these days on Windows 10, we decided to tackle both options. This solution, of course, applies to a browser-based player. If you’re experiencing any streaming issues, consider trying them out first.

As any browser tends to pile up a lot of the cache and store it locally. This will, eventually, downgrade the performance. And it’s especially bad when it comes to online streaming.

That’s why we highly recommend clearing the browsing data (with passwords being an exception) and moving on. If you’re not sure how to clear browser’s cache, follow these instructions:

Google Chrome and Mozilla Firefox

Microsoft Edge

Solution 2 – Reset the app to factory values

On the other hand, if you’re using the app, the analogous action is to reset it to factory settings. This might help for various reasons, the main one being a corruption of locally cached files. So, prior to reinstalling the VUDU app, try resetting it.

We’re well aware of a plethora of issues this app brings to the table, but if it’s already your first choice, you might as well try and do everything in your power.

Expert tip:

Solution 3 – Rollback Adobe Air

While the VUDU app is certainly bringing a lackluster service, there are still some exterior reasons at play. If VUDU player isnt’ working on Windows 10, the Adobe Air version might be the cause.

Namely, based on reports we collected, it looks like certain versions of Adobe Air won’t work with VUDU player. This suggests that rolling back to an older version might relieve you off of streaming issues.

Here’s what you need to do:

In the Windows Search bar, type Control and open Control Panel.

Choose Uninstall a program.

Uninstall the Adobe Air client.

Navigate here and download an older runtime version of the Adobe Air client.

Install Adobe Air and try streaming with the VUDU player again.

Solution 4 – Reinstall the app

Here’s how to reinstall the VUDU player app:

Solution 5 – Try an alternative browser

If one browser doesn’t work, try a different one. Based on reports, the majority of streaming issues were somewhat related to Microsoft’s browsers — Internet Explorer and Edge. That’s why we suggest trying one of the best browsers for Windows that are both safe and fast.

Solution 6 – Go for SD quality

Finally, if you’re unable to load a certain title in a preferred high resolution (HDX), try downgrading and it should work. We’re aware that this isn’t a solution per se, but some vocal users experienced crashes solely on these settings. And this is something VUDU support needs to look into. Until then, try with lower quality and it just might work.

Have in mind that the official requirements for high-quality streaming are 11 MB/s. If you don’t meet the requirements, chances are the stream won’t start.

Was this page helpful?

Start a conversation

Fix: Avg Installation Failed On Windows 10/11

FIX: AVG installation failed on Windows 10/11

996

AVG is a well-known antivirus, that’s both powerful and user-friendly.

So, if AVG got stuck on install, don’t panic – we have all the fixes right here.

Some users reported that reinstalling AVG worked for them, and so did modifying registries.

As a last resort, you could also try using an alternative to AVG antivirus

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix various Windows 10 errors, we recommend Fortect:

This software will repair common computer errors, protect you from file loss, malware damage, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove virus damage now in 3 easy steps:

Download and Install Fortect on your PC

Launch the tool and Start scanning to find broken files that are causing the problems

Fortect has been downloaded by

readers this month.

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

readers this month.

Antivirus is one of the most important software that you have on your PC. Tools such as AVG are designed to protect you from malicious programs, so it’s always a good idea to have an antivirus installed.

Installation problems can always occur, and today we’re going to show you how to fix AVG install error on Windows 10 and 11.

How do I reinstall my AVG? Fix – AVG install error

Quick tip: Use Ninite to install AVG

If you can’t install AVG due to installation errors, you might want to consider using Ninite.

Ninite is a special service that lets you install the most popular programs with just a single installation.

Ninite supports a wide range of applications, and by using it, you’ll skip many installation dialogs and unnecessary bundled apps.

To install AVG using Ninite, simply go to Ninite’s website, check AVG, and download it. After that, run the setup file and wait while AVG is installed.

Fix: AVG install error 0xc0070643 1. Use a third-party uninstaller

While installing AVG antivirus you can sometimes install AVG PC Tuneup as well, since two applications are often bundled.

If you have AVG install error 0xc0070643, you need to remove AVG PC Tuneup tools from your PC.

To complete the uninstall process, you need to make sure all software leftovers and stubborn apps are removed from your PC. The easiest way to do this is with the help of uninstaller software.

Here’s what a third-party uninstaller can get you:

2. Repair your registry

Users reported that error 0xc0070643 can appear due to problems with your registry.

It seems that there are certain registry permission problems that prevent you from installing AVG.

To fix this problem, you need to download and install a third-party registry cleaner and DLL fixer on your PC.

After problems with the registry are resolved, restart your PC and try to install AVG again.

⇒ Get Restoro

3. Use the AVG Remover tool

If you get installation error 0xc0070643, one of the ways to fix it is to run AVG Remover tool. During the installation process, some AVG files will be stored on your PC.

Those files can interfere with future attempts to install AVG, therefore it’s crucial to remove those files.

To do that, you need to download AVG Remover. Run the tool and wait until it removes the previous installation of AVG.

After the tool removes AVG installation, restart your PC and check if the problem is resolved.

Some users are also suggesting to shut down your PC after you use this tool and turn it back on again, so you might want to try that as well.

Download AVG Reset Access tool

Users are also suggesting downloading AVG Reset Access tool. After downloading the tool, run it and check if the problem is resolved.

Another tool that users are recommending is the AVG BFE Fix tool. Simply download AVG BFE Fix, run it and it should fix the problem.

After using all three tools, AVG install error 0xc0070643 should be resolved. We have to mention that few users reported that this method didn’t work for them.

According to them, the AVG Remover tool didn’t fix the problem, and they were still getting 0xc0070643 description: event exec_finished error while trying to install AVG.

To fix this problem, you need to run AVG Remover from Safe Mode. To do that, follow these steps:

Once the Safe Mode starts, all third-party applications and drivers will be disabled, so there’s nothing that will interfere with the AVG Removal tool.

Simply run the tool and follow the instructions on the screen to remove AVG. After doing that, restart your PC and try to install AVG once again.

4. Download and install the offline version of AVG

If you can’t install AVG antivirus due to error 0xc0070643, you might want to try using the offline installation.

This makes downloading AVG a bit faster since the setup file is only a few MB in size, but this method has its flaws.

If there’s any problem with your Internet connection or with AVG’s servers, your installation might fail, and you’ll get error 0xc0070643.

To avoid this problem, it’s recommended that you try using an offline installer.

This installer is significantly larger in size, and it will take you a couple of minutes more to download the setup file, but you should be able to avoid this error completely by using this method.

You can download the offline installation from AVG’s website or from a reliable third-party source.

Keep in mind that offline installation might be hidden in AVG’s download section, so you’ll need to look carefully for it.

5. Remove AVG entries from the registry

According to users, they were unable to install AVG due to problems in their registry.

Apparently, there are some AVG instances in their registry that can prevent AVG from installing, and in order to fix that, you need to remove those instances manually.

Changing your registry can lead to system instability if you’re not careful, therefore we strongly suggest that you export your registry and use that file as a backup in case anything goes wrong.

To fix AVG install error 0xc0070643, do the following:

2. Registry Editor will now start. In the left pane, navigate to HKEY_LOCAL_MACHINESOFTWAREAVG

4. Close Registry Editor.

After closing Registry Editor, try to install AVG again and check if the problem is resolved.

6. Check your permissions

Sometimes error 0xc0070643 can occur if you don’t have the necessary permissions to access the installation folder.

In order to install AVG, SYSTEM needs to have certain privileges. To do that, follow these steps:

Expert tip:

Antivirus tools are necessary if you want to keep your PC protected from malicious users, but it’s usually a bad practice to have multiple antivirus tools or firewalls installed.

Different security tools can sometimes interfere with each other, and in some cases, security tools can even prevent you from installing AVG antivirus.

According to users, AVG install error 0xc0070643 is caused by other antivirus tools, so before you try to install AVG, be sure to disable or uninstall other third-party antivirus or firewall tools.

Users reported that the Comodo firewall was interfering with AVG installation, but keep in mind that almost any third-party tool can cause this problem to appear.

8. Make sure that you have the necessary files

According to users, they were unable to install AVG due to 0xc0070643 description: event exec_finished error message.

This error is caused by missing files related to Visual C++ Redistributable for Visual Studio 2012 Update 4.

To fix the problem, make sure that you download the necessary files and install them.

Users reported that Visual C++ Redistributable for Visual Studio 2012 Update 4 was causing the problem on their system, but you might have to download a different version for your PC.

All the necessary files are available for download from Microsoft’s website.

9. Make sure that you have enough space on your C drive

Few users reported 0xc0070643 description: event exec_finished error message while installing AVG antivirus, and according to them, this message was caused by the lack of hard drive space.

Users reported that the installation error was resolved after freeing some space on their C drive.

Apparently, you need to have more than 4GB of free storage space on your C drive before you can install AVG on your PC.

We have to mention that AVG doesn’t take 4GB of storage space, but it requires this space to be available on your C drive in order to work properly.

10. Change Antivirus

In case you’ve tried out all of the solutions, yet nothing seemed to help, there’s always the option of changing AVG Antivirus with an entirely new antivirus tool.

That being said, know that the market is full of such tools, some of which offer a free version, or even a free trial with full capabilities for you to test out.

ESET Internet Security is among our top recommendations because it offers real-time protection on all fronts while being lightweight. It is easy to use and has one of the highest detection rates, plus it offers tons of useful features such as online payment support, parental controls, and webcam protection.

Fix – AVG install error 0xC007277B

Run setup as administrator

Users reported AVG installation error 0xC007277B, and according to them, you can easily fix this and some other installation errors simply by running AVG setup as administrator.

After doing that, the installation should start with administrator privileges and you won’t have any problems with it.

Fix – AVG install error 0x80070091

Solution: Remove AVG installation directories

If you can’t install AVG due to install error 0x80070091, you need to remove AVG installation files. To do that, delete the following folders:

C:Program FilesAVG

C:Program Files(x86)AVG

Instead of removing these folders manually, you might want to use the AVG Remover tool that will scan your PC and remove most AVG-related files from it.

Fix – AVG install error 0x6001f916, 0xe001f90b, 0x6001f90b or 0xe001f916

Restart your PC

If encounter 0x6001f916, 0xe001f90b, 0x6001f90b or 0xe001f916 error during AVG installation, it means that you need to restart your PC to complete it.

After restarting your PC, the installation will be completed and AVG antivirus will be installed to your PC.

Fix – AVG install error 0xe001d026 or 0xc00700652

Disable any additional installations

Install error 0xe001d026 or 0xc00700652 appears if you have another installation running in the background.

To install AVG properly, you need to be sure that there are no additional installations running in the background.

Almost any installation can cause any of these errors to appear, so be sure that nothing is updating or installing in the background before you try to install AVG.

Fix – AVG install error 0xe001f915

Start AVG installation again

Several users reported error 0xe001f915 while installing AVG. This error code usually appears if the installation is stopped by a user or another application.

This error can also appear if a certain component of AVG installation is stopped. This isn’t a serious error, and in order to fix this problem, you just need to restart the AVG installation.

Fix – AVG install error 0xe001d028

Remove problematic software

If you encounter error 0xe001d028 while installing AVG antivirus, it means that you have one or more applications that are in conflict with AVG.

Keep in mind that other third-party applications can interfere with AVG installation and cause 0xe001d028 error to appear.

AVG has a list of problematic applications and this list includes the following:

Ashampoo Firewall FREE

Better File Rename

BeTwin VS

Eset Smart Security 4

Lock Folder XP

Malwarebytes’ Anti-Malware

PC MACLAN

PC Tools Antivirus

Sunbelt Personal Firewall

System Protect

Webroot Spy Sweeper

This is the list of problematic applications that don’t work with AVG antivirus according to AVG, but there might be also a few other applications that aren’t included in the list.

If you have any of these problematic applications on your PC, you can try updating them and check if that fixes the problem.

If the issue still persists, you need to uninstall these applications and try to install AVG again.

Fix – AVG install error 0xe0060006

Use the AVG Remover tool

Error 0xe0060006 or 0xE0018D06 usually appears if AVG installation is failing, which means that there’s a problem with AVG installation file.

To fix this problem, you need to run the AVG Remover tool and remove your current AVG installation. After that, try to install AVG again.

AVG is a great antivirus tool, but as you can see, there can be some issues while installing AVG. If you encounter any AVG install errors, be sure to try some of our solutions.

Was this page helpful?

Start a conversation

Hid Compliant Pen Driver Is Missing On Windows 11/10

If for some reason, you find that your digital pen is not working on Windows 11/10 computer, the problem may be associated with the HID-Compliant Pen driver. In most cases, the driver gets corrupted and the Device Manager shows a yellow warning icon on the driver. But sometimes, the driver becomes missing from the Device Manager. In this article, we will see what you should do if HID Compliant Pen driver is missing on your Windows 11/10 computer.

HID Compliant Pen driver is missing on Windows 11/10

When you connect a hardware device to your Windows 11/10 computer, Windows first installs its driver. After the successful installation of the driver, you will be able to use that device. You can view the drivers for all the devices in the Device Manager. The HID device drivers are available under the Human Interface Devices branch. If you notice that the HID Compliant Pen driver is missing on your Windows 11/10 PC, the solutions provided below will help you resolve the issue.

Install the latest Windows Update

Uninstall the Intel(R) Precise Touch Device driver

Check hidden devices

Install the driver from the manufacturer’s website

Restore your System

HID or Human Interface Devices are the devices that allow users to interact directly with a computer. When you expand the Human Interface Devices branch in the Device Manager on a Windows computer, you will find different drivers for different HIDs. For example, for Windows touchscreen PCs, the HID-compliant touchscreen driver is required. Both HID-compliant pen and HID-compliant touchscreen drivers are different as the former is required to operate a digital pen and the latter is required for the proper functioning of the touchscreen.

Let’s see all these fixes in detail.

1] Install the latest Windows Update

Microsoft recommends users keep their systems up to date because it provides them with the latest features and installs the latest security patches on their systems. Windows Update also fixes outdated and corrupted device drivers. Your digital pen is not working because the HID Compliant Pen driver is missing from the Device Manager. Therefore, we suggest you check for Windows Update and install the same if it is available.

2] Uninstall the Intel(R) Precise Touch Device driver 3] Check hidden devices

Sometimes, multiple instances of the driver for the same device get installed on Windows 11/10. This may create a conflict and the respective device stops working. It is possible that multiple instances of HID-Compliant Pen driver have been installed on your system. In some cases, multiple instances can be viewed easily in the Device manager, whereas in some cases, multiple instances become visible after enabling the hidden devices.

Follow the steps written below:

Open the Device Manager.

If you see the HID-Compliant Pen drivers, uninstall them.

Restart your computer and connect your digital pen again. Windows will install the driver for your digital pen and it will start working again.

4] Install the driver from the manufacturer’s website

If the above fixes did not help, you have to download the driver from the manufacturer’s official website and then install it manually. Visit the manufacturer’s website, enter the model number of your product, and download the driver. If the installer is in Zip format, extract it, then open the respective folder. Now, run the installer file to install the driver manually.

You can follow this method to download the driver of any device. For example, if you want to reinstall the HID-Compliant touch screen on Windows 11, download its driver from the manufacturer’s website and then install it manually. But first, uninstall the currently installed driver.

If the driver is downloaded in INF format, you can install it by using the Device Manager.

5] Restore your System

System Restore is a tool that helps you fix the issues on your Windows computer by taking it back to its previous working state. By default, it is turned on on every Windows device. When it is turned on, it creates restore points automatically. These restore points are used to restore the system to the previous working state.

If the problem has started recently and the system restore point is created on your system, you can easily fix the issue. Before performing the system restore, you can view all the restore points created on your system and select any of them according to the date on which they were created. Restore your system by selecting the restore point that was created before the problem started occurring on your computer.

This should help.

Read next: How to download or update HID compliant touch screen driver.

Fixed – Windows 10 Could Not Reconnect All Network Drives

A network drive or a mapped drive is a storage device present on the Local Area Network present within home or business. It could be located on a NAS (Network-attached storage) or a server. It mostly appears with locally installed drives. However, with network drives, users can be given permissions to edit, copy, delete, and even upload data.

Why Windows 10 Could Not Reconnect All Network Drives At Boot Up?

If the problem is persistent, here are some measures you can undertake to resolve the issue.

Ways To Fix Windows Could Not Reconnect All Network Drives – 1. Using The Group Editor Policy

1. Open the run dialog box by pressing Windows + R keys

2. Type chúng tôi

4. Enable Always wait for the network at computer startup and logon

6. Restart the computer

2. Disconnect The Drive

3. Select Disconnect network drive

3. Use Command Prompt and Powershell Scripts At The Start-Up

If the above methods don’t seem to work, you can run scripts at the startup which would further help you map drives. Here we will give you scripts for both the Command Prompt as well as the Powershell.

Also Read: Difference Between PowerShell & CMD in Windows 10

Note: You must have an active network connection when following the steps mentioned below –

Command Prompt

1. Open a Notepad

2. Copy and paste the following script

3. Name this file as cmd and save it to any desired location

Powershell

1. Open another Notepad

2. Copy and paste the following script

$i=3

while($True){

$error.clear()

foreach( $MappedDrive in $MappedDrives)

{

try {

New-SmbMapping -LocalPath $MappedDrive.LocalPath -RemotePath $MappedDrive.RemotePath -Persistent $True

} catch {

Write-Host "There was an error mapping $MappedDrive.RemotePath to $MappedDrive.LocalPath"

}

$i = $i - 1

if($error.Count -eq 0 -Or $i -eq 0) {break}

Start-Sleep -Seconds 30

}

3. Save the script as MapDrives.ps1. It is essential that you use this name.

After you have created the scripts, head to your StartUp folder and follow the steps mentioned below –

4. Navigate to %ProgramData%MicrosoftWindowsStart MenuProgramsStartUp

5. Copy and paste the cmd script in this folder

6. Now head to your system drive and create another folder by the name Scripts

7. In this folder paste the Powershell script

8. Reboot your computer

9. You should now be able to see your mapped drives with no hassles.

4. Use The Task Scheduler

Task Scheduler is an alternative if you don’t want to use the StartUp folder. As the name suggests, Task Schedular lets you run and execute the scripts. Here are the steps using which you will be able to use the Task Scheduler to resolve the “Could not reconnect all network drives” in Windows –

3. By default, you will enter the General tab. Here enter the name of the task such as mapping network drive script

5. Check the Run with highest privileges

9. Choose Start a program from the Action drop-down and then choose Powershell.exe

10. Enter the following command in the box –

11. In Start in enter the following location to enter the location of the PowerShell script

%SystemDrive%Scripts

13. Now, go to the Conditions tab and make sure that Start only if the following network connection is available is checked

14. From the dropdown select Any connection

5. Disable The Appropriate Option At The Start-Up Using The Registry Editor

At the outset, we’d like to emphasize that it is always a good practice to create a backup of registries before making any modifications to them. With the backup handy even if something goes wrong, you can restore your existing registries and avoid any mishaps. With that out of the way let’s see how we can resolve the “Could not reconnect all network drives” in Windows using the registry editor –

1. Open the Run dialog box by pressing the Windows + R keys

2. Type Regedit

3. Navigate to the below-mentioned path –

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlNetworkProvider

5. Save the changes and close the editor

6. Reboot your system

Wrapping Up