Trending March 2024 # Disable Windows Update Delivery Optimization In Windows 10 # Suggested April 2024 # Top 7 Popular

You are reading the article Disable Windows Update Delivery Optimization In Windows 10 updated in March 2024 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Disable Windows Update Delivery Optimization In Windows 10

Windows Update Delivery Optimization (WUDO) is designed to help Windows users get the Windows store apps and other Windows updates more quickly and efficiently – even if you have an unreliable Internet connection.

The WUDO feature is enabled by default in all Windows 10 systems except the Enterprise versions. When enabled, all the Windows updates are shared among all the PCs in the same network. This helps save your Internet bandwidth, as every PC in your network will be sharing the updates among them rather than downloading the updates separately from Microsoft servers.

Along with sharing and downloading the updates and apps over the local networks, the WUDO feature also shares them with other PCs over the Internet. Simply put, this new feature is much like a torrent and uses your bandwidth to share the updates with other PCs over the Internet.

According to Microsoft, the WUDO feature has very little impact on your Internet connection. Moreover, when downloading the Windows updates from other PCs, Windows checks for the integrity of those files as if they are downloaded directly from the Microsoft servers. If there are any changes or inconsistencies in the files, Windows stops downloading from the target PC and checks for another source, be it another PC on the Internet or the Microsoft server.

This is all good and well, but if you are on a limited or metered Internet connection, then keeping this feature enabled may not be an option for you unless you want to pay hefty bills in the name of the Internet. So it is a good thing to either configure or disable the feature so that it won’t waste your bandwidth.

Customize or Disable the WUDO Feature

As I said before, the WUDO feature is enabled by default and is also configured to download and share updates with PCs on the local network and on the Internet.

If you want to completely disable the WUDO feature, toggle the button to “Off,” and you are good to go.

However, if you just want to share the updates among the PCs in your local network, then select the “PCs on my local network” option.

This action ensures that the updates are only shared with PCs on your local network and not with PCs on the internet.

Vamsi is a tech and WordPress geek who enjoys writing how-to guides and messing with his computer and software in general. When not writing for MTE, he writes for he shares tips, tricks, and lifehacks on his own blog Stugon.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

You're reading Disable Windows Update Delivery Optimization In Windows 10

Windows Update And Security Settings In Windows 10

Looking for Windows Updates on your Windows 10 PC? Go to the Windows 10 Settings app to find the latest Windows Update and install them on your PC. In this post, we will have a look at the Windows Update and Security Settings in Windows 10 and learn how to change and update them on your PC.

Windows Update & Security Settings in Windows 10

Windows Update

Delivery Optimization

Windows Security

Backup

Troubleshoot

Recovery

Activation

Find my device

For developers

Continue reading to know more about all these categories of settings.

1. Windows Update

Advanced options include update options and update notifications where you can turn on/off the settings for the following.

Receive updates for other Microsoft products when you update Windows

Download updates over metered connections

Restart the device as soon as possible when a restart is required to install an update

Show a notification when your PC requires a restart to finish updating

You will also find links to pause updates, delivery optimization, and privacy settings.

Furthermore, in the Windows Update tab, under Related links, you will see the options such as Check Storage and OS build info.

Windows Update will work differently in Windows 10. There will be no Patch Tuesdays. Microsoft has said it will use two different methods to provide updates: regular updates to normal users and periodic updates to users operating mission-critical operations. Consumers will be delivered the updates and new features as soon as they are available. Businesses will be able to opt-in to the fast-moving consumer pace, or lock-down mission-critical environments, to receive only security and critical updates to their systems.

TIPS:

You can use Quiet Hours to schedule restarts.

You can now log in automatically after Windows Update if you enable the Use my sign in info to automatically finish setting up my device after an update setting.

2. Delivery Optimization

You can also download Windows Updates & Apps from other Windows 10 PCs. When this option is turned ON, your PC may also send parts of previously downloaded Windows Updates and apps to PCs on your local network or PCs on the internet, depending on what’s selected from the provided options.

Advanced options include settings where the users can limit how much bandwidth is used for downloading or uploading updates, monthly upload limit, and such. Activity monitor will show the download statistics and upload statistics.

See this post if you wish to learn about a workaround to Turn Off Windows Update in Windows 10. You can also make Windows 10 notify you before downloading Updates. This post shows how to run Windows Updates from Command-Line.

3. Windows Security

Virus & threat protection

Account protection

Firewall & network protection

App & browser control

Device security

Device performance & health

Family options

Read: Windows 10 Security features.

4. Backup

5. Troubleshoot

Running the troubleshooter might help your device keep functioning properly.

Further below, you will see various options where you can run the troubleshooter to find and fix problems.

Internet connections

Playing audio

Printer

Windows update

Bluetooth

Incoming connections

Keyboard

Network adapter

Power

Program compatibility troubleshooter

Recording audio

Search and indexing

Shared folders

Speech

Video playback

Windows store apps

6. Recovery

In this tab, you will find the option to reinstall Windows in case your PC is giving you problems. It is also possible to go back to the previous version of Windows 10 on your PC within a span of 10 days or so. Advanced startup will enable you to restore Windows from a system image, change Windows Startup settings, and so on.

You can explore and learn more about the recovery options.

If by any chance you don’t like the updated Windows 10 OS, you can roll back to your previous build of Windows from here using a system image or a removable drive. The recovery option also gives you a chance to Reset your PC where you can reinstall Windows in your PC while keeping your files safe.

7. Activation

Here, you will find details of the Windows edition and activation. Users can go to the store to upgrade your version of Windows and change the product key.

8. Find my device

This is a feature that can help you locate any of your Windows 10 device such as a PC, laptop, Surface, or a Surface Pen when it is lost or stolen. To use this feature, the location should be turned on. You have to sign in to your device with a Microsoft account and be sure you are an administrator on it. This is not applicable to a work or school account, iOS devices, Android devices, or Xbox consoles.

Select Change for the device you want to change.

9. For developers

As the name suggests, this tab includes settings only for developers and is linked to the official Microsoft website where developers can enable their device for development, and sideload apps.

You have to sign in as an administrator in order to make changes to these settings.

These settings are to be used for development purposes only.

We have, thus, covered all about the Windows Update and Security Settings in Windows 10.

I hope this was a useful read!

How To Enable Or Disable Autoplay In Windows 11/10

In this post, we will see how to disable AutoPlay in Windows using the Control Panel, Group Policy, or the Registry Editor. But before that, let us see what is AutoPlay and AutoRun in Windows. Then we will see how to enable or disable AutoPlay or AutoRun in Windows 11/10/8.

Difference between AutoPlay & Autorun

Autorun is used to start some programs or enhanced media content automatically when you insert a CD, DVD, or another media type into your computer. This is different from AutoPlay, but the result is often the same: when inserted, the CD starts automatically, using a particular program.

AutoPlay lets you choose which program to use to start different kinds of media, such as DVD, CD, etc, containing music, video, photo, etc. For example, the first time you try to play a music CD, AutoPlay will ask you which media player you want to use if you have more than one installed on your computer. You can read more here about AutoPlay in Windows. Autorun is incorporated into the media types that use it, and you can’t modify it. When you try to play a CD that uses autorun, AutoPlay asks you to choose an action to perform -to play the autorun content or to skip it. AutoPlay lets you choose an action, and it is in a way, the successor to AutoRun.

In order to help prevent malware from spreading using the AutoRun mechanism, Microsoft made an important change, starting with Windows 7. AutoPlay no longer supports the AutoRun functionality for non-optical removable media. In other words, AutoPlay still works for CD/DVDs but not for work for USB drives.

AutoPlay in Windows 11/10

When you connect devices to your Windows computer, the AutoPlay feature starts running automatically and begins playing media such as music, images, and videos. For example, the first time you try to play a music CD, AutoPlay asks which media player you want to use if you have more than one installed on your computer. Although good, some of you may want to disable the feature.

Disable AutoPlay in Windows 11/10

Here’s how you can disable AutoPlay in Windows 11/10/8/7.

1] Control Panel

Open Control PanelAll Control Panel ItemsAutoPlay and set the options as per your preferences.

2] Using Settings Windows 11

Open Windows 11 Settings

Open Bluetooth and devices settings

Toggle the AutoPlay slider to Off position.

You can also change other related AutoPlay settings.

Windows 10

Here you can toggle the AutoPlay slider to Off position.

You can also change other related settings here.

3] Using Group Policy

This policy setting allows you to turn off the Autoplay feature. Autoplay begins reading from a drive as soon as you insert media in the drive. As a result, the setup file of programs and the music on audio media start immediately. Prior to Windows XP SP2, Autoplay is disabled by default on removable drives, such as the floppy disk drive (but not the CD-ROM drive), and on network drives. Starting with Windows XP SP2, Autoplay is enabled for removable drives as well, including Zip drives and some USB mass storage devices. If you enable this policy setting, Autoplay is disabled on CD-ROM and removable media drives, or disabled on all drives. This policy setting disables Autoplay on additional types of drives. You cannot use this setting to enable Autoplay on drives on which it is disabled by default. If you disable or do not configure this policy setting, AutoPlay is enabled.

Restart your computer.

Read: How to set AutoPlay defaults in Windows.

4] Registry Editor

The same can also be achieved by editing the Registry. Run regedit and navigate to

HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer

Can’t Login To Windows 10/11 After Windows Update

A major Windows update can sometimes cause login problems on Windows 10 and Windows 11 computers. When you try to sign in to your user account, the system might immediately return you to the login screen without any error message or apparent progress. If you encounter this issue, don’t worry. There are several things you can do to troubleshoot and resolve it.

Windows 11/10 login issue after update

One of the easiest fixes for the “can’t login to Windows 10/11 after update” problem is to boot your computer into safe mode and then reboot it to normal mode. This workaround can help you bypass any conflicts or errors that are preventing your system from starting up properly. Here’s how to do it:

On the startup settings screen, press 4 on your keyboard to select “Enable Safe Mode” on the next restart.

Login to safe mode as you would in normal mode.

Restart the computer again to return to normal mode.

After completing these steps, you should be able to log in to your Windows account without issues. However, note that this workaround may only work temporarily. If the login problem recurs, you might need to try another solution.

If you’re unable to locate the power button on the Windows 11/10 login screen, refer to this guide: How to Enter Safe Mode in Windows 11/10 If Your Windows is Corrupted.

If you can’t log in to your existing account, you can create a new user account through command prompt in safe mode. Here’s how to do it:

Follow steps 1-3 above to enter safe mode with command prompt.

When your system reboots into command prompt, enter the following command to create a new user account: net user [username] /add

Optionally, you can assign a password to the new account with this command: net user [username] [password]

Restart your computer and log in to the newly created account.

If you can sign in successfully, you can transfer your files and settings from the old account to the new one and use it as your primary account.

Another potential solution to the Windows 11/10 login loop issue is to use the Windows Recovery Environment to troubleshoot the issue. This method can help fix any corrupted system files or startup settings that might be preventing your computer from logging in properly. Here’s how to use it:

Insert a Windows installation media (such as a USB drive or DVD) into your computer and boot from it.

Follow the on-screen instructions to complete the startup repair process.

Note that this solution might take longer than the other solutions provided and may require you to have a Windows installation media or recovery drive ready.

If the login problem persists even after trying the previous fixes, you can roll back your Windows update to an earlier version or restore your system to a previous state. Here are your options:

Rollback to an earlier version: If your Windows update is a major one, you can use the Windows recovery environment to revert to a previous build or version. This can help you undo any changes or updates that might have caused the login problem.

System restore to a previous point: If you have a restore point saved on your system, you can use it to restore your computer to a previous state when it was working fine. This can help you eliminate any software or configuration changes that might have caused the login problem.

Reset your Windows: If neither of the above options works or if you want to start fresh, you can reset your Windows 11/10 to its factory settings. Before doing so, make sure you back up your important files and data first. This can help you erase any corrupted or damaged files that might be preventing your system from starting up properly.

Summary

In addition to the solutions covered in this article, there are a few other things you can do to prevent or mitigate login problems on your Windows 10 or Windows 11 computer after updates. One effective strategy is to stay informed and up-to-date on the latest Windows updates and known issues. You can do this by regularly checking the Windows Update page, subscribing to Microsoft’s blogs or newsletters, or joining online forums or communities where users share their experiences and solutions.

Another useful tip is to run regular system maintenance tasks such as disk cleanup, defragmentation, and error checking to keep your system optimized and healthy. You can also consider using third-party tools or software that can help you automate or simplify these tasks, or monitor your system’s performance and alert you of any potential issues.

Finally, don’t forget to back up your important files and data regularly to avoid data loss or corruption in case of system failure or other disasters. You can use cloud storage, external drives, or other backup solutions to keep your data safe and accessible.

How To Reset Windows Update Components On Windows 10

Windows Update is an essential component of Windows 10, as it allows downloading and installing the latest updates with bug fixes, security patches, and drivers. Also, it is the mechanism to download new feature updates and preview builds. However, there will be times when your device may not download or install updates because of a specific error message, Windows Update not connecting to the Microsoft servers, and other problems.

Typically, users may encounter this type of problem when the Windows Update agent-related services stop working, Windows 10 has an issue with the update cache, or some components get corrupted. You can reset Windows Update on Windows 10 to fix most problems in these situations.

This guide will teach you how to reset the Windows Update components using the “Windows Update Troubleshooter” utility. Also, you will learn the instructions to use Command Prompt to fix Windows Update manually to get security patches, drivers, and features downloaded again on your computer. However, before using the Command Prompt option, use the instructions to manually install the most recent update, Service Stack Update (SSU), and repair system files. 

To reset Windows Update using the troubleshooter tool on Windows 10, use these steps:

Under the “Get up and running” section, select the Windows Update option.

Continue with the on-screen directions.

Once the computer restarts, try to update Windows 10 one more time, and now it should work as expected.

To install an update manually to fix problems with Windows Update on Windows 10, use these steps:

Open the Windows 10 update history website.

Browse to the latest update information for your version of Windows 10 and note the “KB” number from the left pane.

Open the Microsoft Update Catalog website.

Search for the knowledge base (KB) number of the update.

Restart the computer.

To ensure that Windows 10 has the most recent Servicing Stack Update to fix Windows Update problems, use these steps:

Open Settings.

Under the “System type” section, check whether you have the 32-bit or 64-bit version of Windows 10.

Open the Microsoft Update Catalog website.

Download the most recent Servicing Stack Update for the version you have (32-bit (x86) or 64-bit (x64)).

Restart your computer.

After you restart the computer, you should now be able to download and install the update using the Settings app.

To fix the system files using the Deployment Image Servicing and Management (DISM) and System File Checker (SFC) tools to fix Windows Update problems on Windows 10, use these steps:

Open Start.

Type the following DISM command to repair corrupted system files and press Enter:

dism.exe /Online /Cleanup-image /Restorehealth

Type the following SFC command to repair system files and press Enter:

sfc /scannow

After completing the steps, the Windows Update components should start working again, and you can check for updates to verify.

To reset Windows Update manually from Command Prompt on Windows 10, use these steps:

Open Start.

Type the following commands to stop the Background Intelligent Transfer Service (BITS), Windows Update service, and Cryptographic service, and press Enter on each line:

net stop bits net stop wuauserv net stop appidsvc net stop cryptsvc

Quick tip: You may need to run the command more than once until you see the message that the service has stopped successfully.

Type the following command to delete all the qmgr*.dat files created by BITS from your PC. and press Enter:

Del "%ALLUSERSPROFILE%Application DataMicrosoftNetworkDownloader*.*"

Type Y to confirm the deletion.

Type the following commands to clear the Windows Update cache to allow Windows 10 to re-download the updates instead of using the files already downloaded on the system that might be damaged, and press Enter on each line:

rmdir %systemroot%SoftwareDistribution /S /Q rmdir %systemroot%system32catroot2 /S /Q

Quick tip: We use the remove directory rmdir command with the /S option to delete the specified directory and all subdirectories within the main folder, and the /Q option deletes directories quietly without confirmation. If you get the message “The process cannot access the file because it is being used by another process,” repeat step 1 and try again, as one of the services might have restarted unexpectedly.

Type the following commands to reset the BITS and Windows Update services to their default security descriptor, and press Enter on each line:

sc.exe sdset bits D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU) sc.exe sdset wuauserv D:(A;;CCLCSWRPWPDTLOCRRC;;;SY)(A;;CCDCLCSWRPWPDTLOCRSDRCWDWO;;;BA)(A;;CCLCSWLOCRRC;;;AU)(A;;CCLCSWRPWPDTLOCRRC;;;PU)

Type the following command to move to the System32 folder and press Enter:

cd /d %windir%system32

Type the following commands to register all the corresponding BITS and Windows Update DLL files on the Registry and press Enter on each line:

regsvr32.exe /s atl.dll regsvr32.exe /s urlmon.dll regsvr32.exe /s mshtml.dll regsvr32.exe /s shdocvw.dll regsvr32.exe /s browseui.dll regsvr32.exe /s jscript.dll regsvr32.exe /s vbscript.dll regsvr32.exe /s scrrun.dll regsvr32.exe /s msxml.dll regsvr32.exe /s msxml3.dll regsvr32.exe /s msxml6.dll regsvr32.exe /s actxprxy.dll regsvr32.exe /s softpub.dll regsvr32.exe /s wintrust.dll regsvr32.exe /s dssenh.dll regsvr32.exe /s rsaenh.dll regsvr32.exe /s gpkcsp.dll regsvr32.exe /s sccbase.dll regsvr32.exe /s slbcsp.dll regsvr32.exe /s cryptdlg.dll regsvr32.exe /s oleaut32.dll regsvr32.exe /s ole32.dll regsvr32.exe /s shell32.dll regsvr32.exe /s initpki.dll regsvr32.exe /s wuapi.dll regsvr32.exe /s wuaueng.dll regsvr32.exe /s wuaueng1.dll regsvr32.exe /s wucltui.dll regsvr32.exe /s wups.dll regsvr32.exe /s wups2.dll regsvr32.exe /s wuweb.dll regsvr32.exe /s qmgr.dll regsvr32.exe /s qmgrprxy.dll regsvr32.exe /s wucltux.dll regsvr32.exe /s muweb.dll regsvr32.exe /s wuwebv.dll

Quick note: The regsvr32 helps to register “.DLL” files as command components in the Registry, and we use the /S option to specify the tool to run the command silently without prompting additional messages.

Type the following commands to reset the network configurations that might be part of the problem (but do not restart your computer just yet), and press Enter on each line:

netsh winsock reset netsh winsock reset proxy

Type the following commands to restart the BITS, Windows Update, and Cryptographic services, and press Enter on each line:

net start bits net start wuauserv net start appidsvc net start cryptsvc

Restart the computer.

Once you complete the steps, Windows Update should reset and work again on your Windows 10 device.

You can also use the above instructions to fix the update problems when Surface Pro 9, 8, Laptop 5, Studio 2, or any other Surface cannot seem to download a new firmware update.

What Is Uac In Windows 10 And How To Disable It

If you have a network of computers in your home or workplace, one of the things you need to control is which users or apps get to change things in that system.

One way to prevent unauthorized changes is to have one person as the network administrator. However, it’s not enough just to have one person managing everything, which is where the User Access Control (UAC) feature comes in.

Table of Contents

This guide explains what UAC is and how you can disable it in Windows 10.

What Is UAC?

Such changes can be initiated by users, viruses, malware, or applications. But if the administrator doesn’t approve the changes, they won’t be executed.

Among the changes that require administrative privileges include:

Each time you run a desktop app that requires admin permissions, the UAC pops up. You’ll also see it when you want to change important system settings that require admin approval.

Any users on your network can sign into their computers using a standard user account, but any processes they launch will be performed using access rights granted to a standard user.

For example, any apps started using Windows Explorer will run with standard user level permissions. This includes apps included with Windows 10 itself.

For legacy apps, which aren’t designed with security in mind, additional permissions are often required to run successfully. More permissions are required for actions such as installing new software and changing Windows Firewall configurations, as this requires administrator account level permissions.

If you need to run an app that requires more than standard account user rights, you can restore more user groups to the token in order to manage apps that make system level changes to your computers or devices.

For families, there’s an option to create a dedicated Child account that comes with various limitations and integrated parental controls and monitoring.  Learn more in our Microsoft Family account and how to add a family member to your Microsoft account guides.

UAC Slider Levels in Windows 10 and What They Mean

In Windows Vista, there were only two UAC options: On or Off. In Windows 10 however, there are four UAC levels to choose from:

Always Notify: Notifies you before users and apps make changes that require admin permissions. It also freezes other tasks until you respond, and is recommended if you often visit unfamiliar websites or install new software.

Notify me only when programs/apps try to make changes to my computer: Notifies you when programs try to make changes to your computer or install software. This level also freezes other tasks until you respond, but it won’t notify you when you make changes to Windows settings.

Notify me only when programs/apps try to make changes to my computer (do not dim my desktop): Notifies you when a program tries to make changes or install software on your computer. It doesn’t notify you when you make changes to Windows settings and doesn’t freeze tasks until you respond. Choose this level only if it takes long to dim your computer’s desktop.

Never notify: Doesn’t notify you when a program tries to make changes, install software, or when you modify Windows settings. This setting isn’t recommended, especially if you don’t have a good security suite as it’s much easier for viruses and malware to infect your computer with UAC turned off.

How to Disable UAC in Windows 10

Note: We don’t recommend disabling UAC on your computer as doing this makes it easier for malicious programs to infect and manage your computer. If there are apps that keep triggering UAC, use Windows Task Scheduler to run those apps without admin rights and UAC prompts first, instead of disabling UAC altogether.

If you still want to disable UAC, you can do it via Control Panel, Group Policy, Registry Editor, or using a Command Line.

How to Disable UAC Using Control Panel

Open Control Panel and select User Accounts.

Select User Accounts again.

Next, select Change User Account Control settings.

How to Disable UAC Using a Command Line

To do this, type CMD in the search box, and select Run as administrator.

In the Command Prompt box, enter this command and press Enter:

reg.exe ADD HKLMSOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem /v EnableLUA /t REG_DWORD /d 0 /f

Restart your computer for the changes to take effect.

If you want to enable or turn UAC on again, enter this command:

reg.exe ADD HKLMSOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem /v EnableLUA /t REG_DWORD /d 1 /f How to Disable UAC Using Group Policy Editor

To do this, type Policy Editor in the search box and select Edit Group Policy.

How to Disable UAC Using Windows Registry

You can also disable UAC via the Windows Registry. However, before you do that, make sure you back up the registry to avoid any system issues.

Save the changes and reboot your computer.

Take Control of Your Accounts

UAC makes all the difference between standard user accounts and administrator accounts. With the feature, you have a basic level system security that helps save your system from malicious processes even with a security suite in place.

Update the detailed information about Disable Windows Update Delivery Optimization In Windows 10 on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!