You are reading the article Fix: Avg Installation Failed On Windows 10/11 updated in November 2023 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Fix: Avg Installation Failed On Windows 10/11
FIX: AVG installation failed on Windows 10/11996
Share
X
AVG is a well-known antivirus, that’s both powerful and user-friendly.
So, if AVG got stuck on install, don’t panic – we have all the fixes right here.
Some users reported that reinstalling AVG worked for them, and so did modifying registries.
As a last resort, you could also try using an alternative to AVG antivirus
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix various Windows 10 errors, we recommend Fortect:
This software will repair common computer errors, protect you from file loss, malware damage, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove virus damage now in 3 easy steps:
Download and Install Fortect on your PC
Launch the tool and Start scanning to find broken files that are causing the problems
Fortect has been downloaded by
0
readers this month.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
0
readers this month.
Antivirus is one of the most important software that you have on your PC. Tools such as AVG are designed to protect you from malicious programs, so it’s always a good idea to have an antivirus installed.
Installation problems can always occur, and today we’re going to show you how to fix AVG install error on Windows 10 and 11.
How do I reinstall my AVG? Fix – AVG install errorQuick tip: Use Ninite to install AVG
If you can’t install AVG due to installation errors, you might want to consider using Ninite.
Ninite is a special service that lets you install the most popular programs with just a single installation.
Ninite supports a wide range of applications, and by using it, you’ll skip many installation dialogs and unnecessary bundled apps.
To install AVG using Ninite, simply go to Ninite’s website, check AVG, and download it. After that, run the setup file and wait while AVG is installed.
Fix: AVG install error 0xc0070643 1. Use a third-party uninstallerWhile installing AVG antivirus you can sometimes install AVG PC Tuneup as well, since two applications are often bundled.
If you have AVG install error 0xc0070643, you need to remove AVG PC Tuneup tools from your PC.
To complete the uninstall process, you need to make sure all software leftovers and stubborn apps are removed from your PC. The easiest way to do this is with the help of uninstaller software.
Here’s what a third-party uninstaller can get you:
2. Repair your registryUsers reported that error 0xc0070643 can appear due to problems with your registry.
It seems that there are certain registry permission problems that prevent you from installing AVG.
To fix this problem, you need to download and install a third-party registry cleaner and DLL fixer on your PC.
After problems with the registry are resolved, restart your PC and try to install AVG again.
⇒ Get Restoro
3. Use the AVG Remover toolIf you get installation error 0xc0070643, one of the ways to fix it is to run AVG Remover tool. During the installation process, some AVG files will be stored on your PC.
Those files can interfere with future attempts to install AVG, therefore it’s crucial to remove those files.
To do that, you need to download AVG Remover. Run the tool and wait until it removes the previous installation of AVG.
After the tool removes AVG installation, restart your PC and check if the problem is resolved.
Some users are also suggesting to shut down your PC after you use this tool and turn it back on again, so you might want to try that as well.
Download AVG Reset Access toolUsers are also suggesting downloading AVG Reset Access tool. After downloading the tool, run it and check if the problem is resolved.
Another tool that users are recommending is the AVG BFE Fix tool. Simply download AVG BFE Fix, run it and it should fix the problem.
After using all three tools, AVG install error 0xc0070643 should be resolved. We have to mention that few users reported that this method didn’t work for them.
According to them, the AVG Remover tool didn’t fix the problem, and they were still getting 0xc0070643 description: event exec_finished error while trying to install AVG.
To fix this problem, you need to run AVG Remover from Safe Mode. To do that, follow these steps:
Once the Safe Mode starts, all third-party applications and drivers will be disabled, so there’s nothing that will interfere with the AVG Removal tool.
Simply run the tool and follow the instructions on the screen to remove AVG. After doing that, restart your PC and try to install AVG once again.
4. Download and install the offline version of AVGIf you can’t install AVG antivirus due to error 0xc0070643, you might want to try using the offline installation.
This makes downloading AVG a bit faster since the setup file is only a few MB in size, but this method has its flaws.
If there’s any problem with your Internet connection or with AVG’s servers, your installation might fail, and you’ll get error 0xc0070643.
To avoid this problem, it’s recommended that you try using an offline installer.
This installer is significantly larger in size, and it will take you a couple of minutes more to download the setup file, but you should be able to avoid this error completely by using this method.
You can download the offline installation from AVG’s website or from a reliable third-party source.
Keep in mind that offline installation might be hidden in AVG’s download section, so you’ll need to look carefully for it.
5. Remove AVG entries from the registryAccording to users, they were unable to install AVG due to problems in their registry.
Apparently, there are some AVG instances in their registry that can prevent AVG from installing, and in order to fix that, you need to remove those instances manually.
Changing your registry can lead to system instability if you’re not careful, therefore we strongly suggest that you export your registry and use that file as a backup in case anything goes wrong.
To fix AVG install error 0xc0070643, do the following:
2. Registry Editor will now start. In the left pane, navigate to HKEY_LOCAL_MACHINESOFTWAREAVG
4. Close Registry Editor.
After closing Registry Editor, try to install AVG again and check if the problem is resolved.
6. Check your permissionsSometimes error 0xc0070643 can occur if you don’t have the necessary permissions to access the installation folder.
In order to install AVG, SYSTEM needs to have certain privileges. To do that, follow these steps:
Expert tip:
Antivirus tools are necessary if you want to keep your PC protected from malicious users, but it’s usually a bad practice to have multiple antivirus tools or firewalls installed.
Different security tools can sometimes interfere with each other, and in some cases, security tools can even prevent you from installing AVG antivirus.
According to users, AVG install error 0xc0070643 is caused by other antivirus tools, so before you try to install AVG, be sure to disable or uninstall other third-party antivirus or firewall tools.
Users reported that the Comodo firewall was interfering with AVG installation, but keep in mind that almost any third-party tool can cause this problem to appear.
8. Make sure that you have the necessary filesAccording to users, they were unable to install AVG due to 0xc0070643 description: event exec_finished error message.
This error is caused by missing files related to Visual C++ Redistributable for Visual Studio 2012 Update 4.
To fix the problem, make sure that you download the necessary files and install them.
Users reported that Visual C++ Redistributable for Visual Studio 2012 Update 4 was causing the problem on their system, but you might have to download a different version for your PC.
All the necessary files are available for download from Microsoft’s website.
9. Make sure that you have enough space on your C driveFew users reported 0xc0070643 description: event exec_finished error message while installing AVG antivirus, and according to them, this message was caused by the lack of hard drive space.
Users reported that the installation error was resolved after freeing some space on their C drive.
Apparently, you need to have more than 4GB of free storage space on your C drive before you can install AVG on your PC.
We have to mention that AVG doesn’t take 4GB of storage space, but it requires this space to be available on your C drive in order to work properly.
10. Change AntivirusIn case you’ve tried out all of the solutions, yet nothing seemed to help, there’s always the option of changing AVG Antivirus with an entirely new antivirus tool.
That being said, know that the market is full of such tools, some of which offer a free version, or even a free trial with full capabilities for you to test out.
ESET Internet Security is among our top recommendations because it offers real-time protection on all fronts while being lightweight. It is easy to use and has one of the highest detection rates, plus it offers tons of useful features such as online payment support, parental controls, and webcam protection.
Fix – AVG install error 0xC007277BRun setup as administrator
Users reported AVG installation error 0xC007277B, and according to them, you can easily fix this and some other installation errors simply by running AVG setup as administrator.
After doing that, the installation should start with administrator privileges and you won’t have any problems with it.
Fix – AVG install error 0x80070091Solution: Remove AVG installation directories
If you can’t install AVG due to install error 0x80070091, you need to remove AVG installation files. To do that, delete the following folders:
C:Program FilesAVG
C:Program Files(x86)AVG
Instead of removing these folders manually, you might want to use the AVG Remover tool that will scan your PC and remove most AVG-related files from it.
Fix – AVG install error 0x6001f916, 0xe001f90b, 0x6001f90b or 0xe001f916Restart your PC
If encounter 0x6001f916, 0xe001f90b, 0x6001f90b or 0xe001f916 error during AVG installation, it means that you need to restart your PC to complete it.
After restarting your PC, the installation will be completed and AVG antivirus will be installed to your PC.
Fix – AVG install error 0xe001d026 or 0xc00700652Disable any additional installations
Install error 0xe001d026 or 0xc00700652 appears if you have another installation running in the background.
To install AVG properly, you need to be sure that there are no additional installations running in the background.
Almost any installation can cause any of these errors to appear, so be sure that nothing is updating or installing in the background before you try to install AVG.
Fix – AVG install error 0xe001f915Start AVG installation again
Several users reported error 0xe001f915 while installing AVG. This error code usually appears if the installation is stopped by a user or another application.
This error can also appear if a certain component of AVG installation is stopped. This isn’t a serious error, and in order to fix this problem, you just need to restart the AVG installation.
Fix – AVG install error 0xe001d028Remove problematic software
If you encounter error 0xe001d028 while installing AVG antivirus, it means that you have one or more applications that are in conflict with AVG.
Keep in mind that other third-party applications can interfere with AVG installation and cause 0xe001d028 error to appear.
AVG has a list of problematic applications and this list includes the following:
Ashampoo Firewall FREE
Better File Rename
BeTwin VS
Eset Smart Security 4
Lock Folder XP
Malwarebytes’ Anti-Malware
PC MACLAN
PC Tools Antivirus
Sunbelt Personal Firewall
System Protect
Webroot Spy Sweeper
This is the list of problematic applications that don’t work with AVG antivirus according to AVG, but there might be also a few other applications that aren’t included in the list.
If you have any of these problematic applications on your PC, you can try updating them and check if that fixes the problem.
If the issue still persists, you need to uninstall these applications and try to install AVG again.
Fix – AVG install error 0xe0060006Use the AVG Remover tool
Error 0xe0060006 or 0xE0018D06 usually appears if AVG installation is failing, which means that there’s a problem with AVG installation file.
To fix this problem, you need to run the AVG Remover tool and remove your current AVG installation. After that, try to install AVG again.
AVG is a great antivirus tool, but as you can see, there can be some issues while installing AVG. If you encounter any AVG install errors, be sure to try some of our solutions.
Was this page helpful?
x
Start a conversation
You're reading Fix: Avg Installation Failed On Windows 10/11
Fix Windows 11/10 Installation Error 0X800F0955 – 0X20003
When you try to perform an in-place upgrade repair of your Windows 11 or Windows 10 installation or upgrade to Windows 11 from Windows 10/8.1/8/7 using the ISO, you may encounter the upgrade error code 0x800F0955 – 0x20003. This post is intended to help affected PC users with the most suitable solutions you can apply to fix this error.
When you encounter this issue, you’ll receive the following full error message;
Windows 11 Setup
We’ve set your PC back to the way it was right before you started installing Windows 11.
The installation failed in the SAFE_OS phase with an error during INSTALL_UPDATES operation
Windows 11 Installation error 0x800F0955 – 0x20003If you have encountered the Windows 11 Installation error 0x800F0955 – 0x20003 on your device, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue. These suggestions will apply even if you face the issue on Windows 10.
Run Microsoft Support and Recovery Assistant tool
Run Windows Update Troubleshooter
Disconnect from the internet
Upgrade via Windows Update or use Update Assistant or Media Creation Tool
Clean Install Windows 11
Let’s take a look at the description of the process involved concerning each of the listed solutions.
Before you proceed with the solutions below, check if the device (in the case you’re receiving the error in view during an upgrade from an earlier version of Windows to Windows 11) meets the system requirements for Windows 11.
1] Run Microsoft Support and Recovery Assistant toolThis solution requires you to run the Microsoft Support and Recovery Assistant and see if the automated tool helps resolve the Windows 11 Installation error 0x800F0955 – 0x20003 that occurred on your device.
The tool is designed to help PC users resolve issues with Windows 11/10, if:
Proceed with the next solution if this tool wasn’t helpful.
2] Run Windows Update TroubleshooterThis solution requires you to run the inbuilt Windows Update Troubleshooter and see if that helps.
To run Windows Update Troubleshooter on your Windows 11 device, do the following:
Press Windows key + I to open Settings app.
Under the Most frequent section, find Windows Update.
Follow on-screen instructions and apply any recommended fixes.
To run the Windows Update Troubleshooter on your Windows 10 PC, do the following:
Press Windows key + I to open Settings app.
Go to Update and Security.
Follow on-screen instructions and apply any recommended fixes.
3] Disconnect from the internetWhen upgrading Windows using the ISO, normally Windows will try and connect to the internet and check for updates and install available bits – it’s at this stage or phase of the upgrade process that the operation may go south as indicated on the error description. I have had this experience first hand; so we recommend as soon as you have the Windows ISO downloaded, disconnect the PC from the internet, then mount the ISO (if you’re attempting the upgrade from Windows 7, you’ll need a third-party virtual drive software to mount the ISO image) and run the chúng tôi file from the root folder to begin the in-place upgrade. Once the upgrade process completes successfully and you get to the desktop after completing the OOBE (Out-Of-Box Experience), you can now reconnect the PC back to the internet and check for updates to install the latest required updates.
4] Upgrade via Windows Update or use Update Assistant or Media Creation ToolSince the error in view is occurring trying to upgrade to the latest version of Windows using the ISO, the solution simply requires you to Upgrade via Windows Update or use Update Assistant or Media Creation Tool. For major updates like the Windows 11 Feature Update, you can manually update to the version using the two mentioned tools.
5] Clean Install Windows 11If upgrading isn’t working for you, you can simply create Windows 11 bootable installation media on a Windows computer or on a Linux or Mac computer, back up your files and then proceed to use the media to clean install Windows 11 on the device you were trying to upgrade.
Hope you find this post helpful!
Related post: Fix Windows Upgrade error 0x800700B7- 0x2000A.
Why is Windows 11 not installing?If Windows 11 is not installing on your device, it could be due to a number of reasons. For starters, Windows 11 requires 64GB of storage. So, your first troubleshooting step, is to check/analyze your drive storage space and run Disk Cleanup if need be. Alternatively, you can clean up your Hard Disk via Settings or use Storage Sense to free up disk space.
Can I install Windows 11 without TPM?9 Things To Try If Windows 11 Installation Has Failed
Does your PC display a “Windows 11 installation has failed” error when you try upgrading to Windows 11? This error can be caused by outdated or corrupt graphics drivers, insufficient storage space, or interference from third-party software.
Your computer will also display this error if it doesn’t meet Windows 11 upgrade requirements. Before we highlight potential troubleshooting fixes for this error, let’s run you through Windows 11 software and hardware requirements.
Table of Contents
Windows 11 Upgrade RequirementsIf you’re running Windows 10, use the PC Health Check to access your PC’s compatibility with Windows 11. The app checks all Windows 11 requirements except for graphics card and display compatibility. Here’s a brief rundown of important Windows 11 system requirements:
Storage: at least 64GB of free space.
RAM: at least 4GB RAM.
Graphics card: DirectX 12 or later (with WDDM 2.0 driver).
Trusted Platform Module (TPM): TPM version 2.0.
Display: High Definition (720p).
Firmware: UEFI with Secure Boot support.
OS: Windows 10, version 2004
How to Use the PC Health Check AppDownload and install the PC Health Check app from Microsoft’s website. Launch the app and select the Check now button on the dashboard.
The PC Health Check app will run a quick scan to verify that your computer’s hardware and software configuration meets Windows 11 system requirements. If there are Windows 11 requirements your PC doesn’t satisfy, you’ll see them in the scan results.
Running the PC Health Check scan can help narrow down troubleshooting areas when dealing with Windows 11 installation failures.
1. Unplug External DevicesLeaving USB drives connected to your PC can interrupt the Windows installation process. If any storage devices are connected to your computer, unplug them and try installing Windows 11 again.
2. Update WindowsYour computer must be running at least Windows 10, version 2004 to install a Windows 11 update. Microsoft recommends having all driver and security updates installed on your PC before upgrading to Windows 11.
3. Uninstall Third-Party Antivirus SoftwareSome third-party antivirus apps have components that can interfere with Windows 11 installation. If you have any non-Windows antivirus tools on your PC, remove them and reattempt the Windows 11 installation or upgrade.
Refer to our article on uninstalling Avast, AVG, and other antivirus software in Windows 10.
4. Uninstall Old and Non-Essential AppsMicrosoft also warns that old or outdated software can interrupt the Windows 11 upgrade process.
Select the app(s) you no longer use and select Uninstall to remove it from your computer.
Restart your computer after removing non-essential apps and retry the Windows 11 upgrade.
5. Free Up Storage SpaceWindows 11 requires at least 64 GB of storage (see–How Much Space Windows 11 Uses). The “Windows 11 installation has failed” installation error may pop up if your PC’s storage is less than required. We recommend having 70–90 GB of free storage, however, just to be on the safe side.
If your PC has less than 64 GB of storage, check out 15 ways to free up hard drive space in Windows 10. You’ll also find this tutorial on creating more hard disk space in Windows 10 helpful.
6. Update Your Graphics Card DriverA corrupt or outdated graphics driver can also mess up Windows 11 installation. Update your PC’s graphics card driver to the latest version and re-attempt the Windows upgrade.
Press Windows key + X and select Device Manager on the Quick Access menu.
Select Search automatically for drivers.
Note that automatically updating a driver requires an internet connection. So, make sure your PC is connected to a Wi-Fi or Ethernet network.
7. Enable TPM 2.0 and Secure BootTrusted Platform Module version 2.0 (TPM 2.0) is an essential requirement for running Windows 11. The TPM 2.0 component offers privacy and security-related features (Windows Hello, BitLocker, etc.) on Windows devices. It also protects against malware and stores security credentials like encryption keys, certificates, passwords, etc.
On the other hand, Secure Boot is a Windows security feature that stops malicious software from loading when your PC boots up.
You can’t install Windows 11 if TPM 2.0 and Secure Boot are disabled on your computer. Or if your PC doesn’t support TPM 2.0.
Although TPM is always enabled by default in Windows, it’s sometimes disabled on motherboards used to build custom PCs. Follow the steps below to verify the TPM compatibility status of your Windows 10 computer.
Check TPM Specifications in Windows 10 SettingsAccording to Microsoft, most PCs released in 2023 or later can support TPM 2.0. Here’s how to check if your device supports the Trusted Platform Module (TPM) version required to run Windows 11:
Alternatively, type device security in the Windows Search bar and select the Device security “System settings” option.
If there’s a Security processor section on the “Device security” page, your PC is TPM-enabled. Select Security processor details to check your PC’s Trusted Platform Module version.
If you don’t see a “Security processor” section, your PC either doesn’t support TPM, or the module is disabled. Check the following section to learn how to enable TPM on your PC.
You can also check TPM compatibility from Trusted Platform Module Management software–a standalone app for customizing and managing TPM in Windows.
Press Windows key + R, type tpm.msc in the dialog box, and press Enter.
If TPM is disabled, proceed to the next section to learn how to turn the module back on. But if your PC uses TPM version 1.2, upgrade to a TPM v2.0 computer to use Windows 11.
Enable TPM and Secure BootSelect Troubleshoot.
Select Advanced options.
Select UEFI Firmware Settings.
If you don’t find the “UEFI Firmware Settings” option on the page, your PC isn’t TPM-enabled.
Select the Restart button.
Head to the Security tab and ensure “Intel Platform Trust Technology” is set to Enabled. Depending on your PC’s chipset, the TPM module may be labeled “TPM Device Selection,” “TPM Support,” “TPM 2.0 Security,” “TPM Switch,” etc.
If TPM is disabled, press Enter, select Enabled using your keyboard arrow keys, and press Enter again.
Navigate to the “Secure Boot” row and ensure it’s also enabled. Otherwise, press Enter on your keyboard, set it to Enabled, and press Enter again.
Head to the Exit tab, navigate to Exit Saving Changes, select Yes, and press Enter.
Try installing the Windows 11 update again when your computer comes back on.
8. Troubleshoot or Clear Your PC’s TPMDepending on your PC’s hardware configuration, you may need to clear its TPM before installing a new operating system. Performing a TPM reset ensures that the new OS (i.e., Windows 11) can correctly deploy all TPM-related functionalities. Reset your PC’s TPM if all troubleshooting recommendations
Note: Clearing your PC’s Trusted Platform Module (TPM) can result in data loss. All data and keys (e.g., BitLocker recovery key, sign-in PIN, etc.) encrypted in the TPM are removed. We don’t recommend clearing the TPM of a work PC, school computer, or devices you don’t own. Also, make sure you back up data encrypted by the TPM.
Select Security processor details.
Select Security processor troubleshooting.
Select Clear and restart to proceed.
ClearTPM via the TPM Management AppWindows has a dedicated app for customizing and managing the Trusted Platform Module Management app. Here’s how to use the app to reset your PC’s TPM:
Press Windows + R, type chúng tôi in the Windows Run box, and select OK.
Select Clear TPM in the “Actions” tab.
Select Restart and try installing Windows 11 again when your PC comes back on.
9. Bypass TPM 2.0 and Secure Boot ChecksIf the “Windows 11 installation has failed” error persists, bypass the TPM and Secure Boot checks for Windows 11 installation. Head to the Windows Registry and configure your PC to skip TPM 2.0 and Secure Boot verifications.
Note: Deleting essential system files in the Windows Registry can break your computer. We strongly recommend backing up your PC’s registry before making changes to the registry.
Press the Windows key + R, type regedit in the Run box, and select OK to open the Windows Registry Editor.
Paste HKEY_LOCAL_MACHINESYSTEMSetup in the address bar and press Enter.
Set the “Value data” to 1 and select OK.
Name the new registry key BypassSecureBootCheck.
Close the Registry Editor, reboot your computer, and try upgrading it to Windows 11.
Get Professional SupportFix What Failederror On Windows 11/10
Are you experiencing a blue screen or random crashes with the What Failed: ‘IntcOED.sys’ error code on your Windows 11 or Windows 10 computer? Some users have encountered a blue screen accompanied by the What Failed: ‘IntcOED.sys’ error code. This is the blue screen error that occurs while Windows installs a collective update or while installing the remaining drivers. It is also known as a fatal error as the OS stops working.
If you are one of the affected users, you have landed on the correct page. Here, we have mentioned the solutions that helped affected users to get rid of the error. You try these fixes and resolve the error without much trouble.
What is IntcOED.sys? When does chúng tôi Failed error occur? Driver-related inconsistencyOne of the most common causes of the chúng tôi failed error is issues developed due to driver-related problems. In that case, the Windows Audio troubleshooter can help by using automated fixes. You need to run the Windows Audio troubleshooter and follow the instructions given. Make sure you go for the recommended solution.
Conflict with OED driverAnother reason for developing chúng tôi failed error is a conflict between different system processes. In that case, you will see OED driver issues on the Surface Book Perf base device. The only solution is to force the system to uninstall the existing OED driver. Use the version that is compatible with the system processes.
Corrupted Smart Sound Technology driverDid you know that corrupted or damaged driver files can cause a problem with the audio system? The best solution is to roll back the existing Sound Technology OED driver. After that, you need to let the system opt for an equivalent compatible with the system.
Fix What failed chúng tôi Blue Screen errorThere are various solutions that can help you to fix IntcOED.sys failed error. The accompanying message could include Driver Unloaded without canceling pending operations. We have provided the latest fixes that are 100% working to date.
Uninstall or Reinstall Intel’s Smart Sound Technology (SST)
Run Playing Audio Troubleshooter
Update Drivers Using Intel Driver & Support Assistant
Update BIOS.
Uninstall Recent Feature update.
Run SFC and DISM scans.
Restore computer to factory settings.
You will need administrator permission or an account to resolve this.
1] Uninstall or Reinstall Intel’s Smart Sound Technology (SST)One of the simplest ways to fix the chúng tôi failed error on Windows is to uninstall the SST or Intel Smart Sound Technology. After that, you can reinstall it if you want. However, users report that reinstalling SST might not fix the issue. For the best results, keep SST uninstalled, and that way, you will get rid of the blue screens.
Check out the steps you must adopt to uninstall SST
Press Windows and R keys simultaneously to open the Run dialog box.
Type chúng tôi and press Enter. It will open the Device Manager that offers admin access.
Here, you need to look out for Sound, Video, and Game Controllers in the list of device categories.
Expand the category and locate Smart Sound Technology OED.
You will get a pop-up message that asks if you are sure you want to uninstall the device, press Yes.
Now, you need to wait until the uninstallation occurs.
Restart the PC.
After that, check if the chúng tôi failed error still occurs.
2] Run Playing Audio TroubleshooterOften, the cause of chúng tôi failed error is an improperly ported sound driver from Windows. In that case, Microsoft itself has put forward a fix that you can apply. Here are the steps that you need to follow to run the Audio Troubleshooter –
Select Troubleshoot on the left pane from the list of options, followed by Other Troubleshooters from the right-hand side settings.
It would help if you waited as Windows will scan the system for audio-related issues.
If everything is fine, you have to look out for other solutions.
However, you will get a pop-up message with instructions if there is an issue.
After that, restart the system and check if the problem is fixed.
Read: Fix chúng tôi Blue Screen Of Death error
3] Update Drivers Using Intel assistant SoftwareSometimes, issues with the driver that comes with the Microsoft update can cause the chúng tôi failed error. In that case, you can visit the Intel Driver page and use the Intel Driver & Support Assistant software to update the drivers.
Follow the on-screen instructions to install the software.
Once the software is installed, please open it and run the Support Assistant.
It will automatically detect the software to update and install. Follow the on-screen instructions.
This suggestion is likely to help you.
Related: Intel Driver & Support Assistant is not working
4] Update BIOSTo update your motherboard’s BIOS, you need to follow the set of instructions given by the motherboard manufacturer. Search with “Motherboard manufacturer name + Model + update bios” to get instructions.
Do note that updating your BIOS is sensitive, so you must be careful otherwise it will result in bricking your motherboard. It is recommended that if you aren’t experienced, take your PC to a certified technician.
Check if this fix works in your case. If it doesn’t and your PC has updated BIOs, try the next potential fix to resolve it.
See: Fix chúng tôi BSOD error
5] Run SFC and DISM scanIf the above solutions didn’t work for you, there is a chance you are dealing with system corruption. If the scenario is applicable, you can try running SFC and DISM scans to fix system file corruption. This method has proven to be effective in many cases and might just work for you as well.
To run an SFC (System File Checker) scan on Windows 11, you need to follow the following steps:
Firstly, launch the Command Prompt with administrator rights.
In the Command Prompt, type the following command:
SFC /scannowNow, press Enter and it will scan the system for corrupted system files.
Once the scan is done, restart your PC and see if the same error appears again or not.
If SFC fails to get the error fix, then you can try scanning with DISM (Deployment Image Servicing and Management tool) which might be helpful. It’s just like a System File Checker. However, it uses the Windows update to replace the corrupted file, so that is one step ahead of SFC. You can follow the below steps to perform a DISM scan:
Firstly, open the Command Prompt with administrator rights.
Now, type the below commands in CMD and press Enter:
DISM /Online /Cleanup-Image /CheckHealth DISM /Online /Cleanup-Image /RestoreHealthWhen both the commands are executed successfully, restart the PC and see if the error is fixed.
If running an SFC scan or DISM scan doesn’t help fix the error, you can try the next potential fix to get rid of it.
Read: How to fix chúng tôi Blue Screen Error?
6] Uninstall Recent Feature UpdateIt is possible that the recently installed feature update conflicts with the chúng tôi dependency and you end up having an chúng tôi failed error. In that case, uninstalling the recent feature update might help you fix the error. To uninstall recent Feature updates, you need to follow the steps:
Firstly, press Win+ R and open the Run dialog box.
Now, type ‘appwiz.cpl’ in it to open Programs and features.
Once you are in installed updates, find the last update on the Microsoft Windows tab.
Once it gets uninstalled, restart your PC and notice if the error at hand is stopped or not.
If the error still appears again, there are a few more fixes you can try. So, move on to the next potential solution.
See: Fix chúng tôi failed Blue Screen error
7] Restore Windows to Factory settingsIf the above measures do not work, then you can opt to reset your PC to factory settings without data loss. It automatically clears all the recent activity and starts fresh from scratch. To reset your Windows, follow the steps:
First of all, open the Settings app using Windows + I hotkey.
Next, go to the System tab and scroll down to the Recovery option on the right-side panel.
On the Recovery page, tap on the Reset PC option.
Next, choose to keep your files and Apps and continue with the resetting process.
Once done, the system will restart. Upon the next startup, check if the error is fixed or not.
Read: Fix chúng tôi failed BSOD error
The chúng tôi failed error on Windows can be particularly frustrating if you keep getting the blue screen. That is why it is vital to identify the primary reason and work towards applying the best solution. Fortunately, there are multiple solutions that you can use to resolve the error. However, if the satiation is still not fixed, you must contact an expert technician.
Read: Fix EXFAT FILE SYSTEM (volmgr.sys) BSOD error
What causes chúng tôi failed error on Windows 11?We have investigated and analyzed the possible causes of the chúng tôi failed error based on various reports. Here are the possible causes due to which the error may occur:
This error is most likely to be caused due to some driver-related instability issue. In that case, the error could be fixed by running the audio troubleshooter.
An obsolete feature update might be the reason for the error which can have bugs. Hence, uninstalling the recent feature update can also fix the problem.
The corrupted sound driver can be a probable cause of it which is a result of having corrupt driver files. So, the simple solution to this cause is to uninstall the Smart Sound Technology OED driver.
Outdated BIOS might also be the reason for this error. Hence, you can try updating BIOS to the latest version can resolve the error for you.
It can also be caused due to corrupted system files. So, if the scenario is applicable, you can try running SFC and DISM scans to fix it.
There might be some other underlying reasons for the error at hand. In any case, you can try the fixes we have mentioned in this article to fix the error.
What is Intel’s Smart Sound Technology?The Smart Sound Technology or SST from Intel is an excellent integrated audio Digital Signal Processor or DSP. It is designed to manage speech, voice, and audio interactions. With Intel’s SST, the Intel Atom and Intel Core processor PCs interact with the voice command efficiently and swiftly. You can expect high-quality audio without any compromise on the battery life and performance of the system.
Fix Backup Error 0X81000033 On Windows 11/10
Have you come across a 0x81000033 error? It occurs when a system image is included in the ongoing backup. The system image backup fails when the recovery petition size is insufficient. It also occurs due to the following conditions:
Installation of too many language packs on the computer.
Outdated device drivers.
System protection turned off.
Too much disk space by USN Journal.
How to fix the 0x81000033 backup error?Here are a few solutions that will help you fix this error on Windows 11/10.
Using Disk clean-up tool
Removal of unnecessary language packs
Ensure that the system protection is turned on
Update the outdated Device Drivers
Remove USN Journal
Inspect the hardware
Increase System Reserved Partition size
Let us look at these solutions in more detail.
1] Using Disk clean-up toolOne of the reasons for backup error is inadequate storage space. In such a case, you can then go and check the current free space on the root drive. If the display space is filled more than 85% or more, then you can opt for the Disk Cleanup tool to free up unnecessary cache, old Windows installation, temp files, etc. Once the same is complete, you need to restart the PC. After you restart the PC, please try to create a system back up again. If you are still facing the same problem, you can try the next solution.
2] Removal of unnecessary language packsBy default, there is only one language pack installed on Windows 11/10. But, sometimes you may accidentally mark the checkboxes while installing optional updates which will result in the installation of too many language packs. This will result in loss of disk space and prevents the system from creating the restore point. You can do the same with the following steps:
A] Opening Time and Language options:
B] Setting up the language section:
You can then restart the desktop and see if you can create a system backup.
3] Ensure that the system protection is turned onPlease note that this solution is applicable only when the system protection is disabled on your PC. You can turn on the system protection with the following steps:
A] Opening the System Protection:
B] Configuring the system properties:
The system will launch its properties window. Under the System Properties, choose the root drive followed by Configure.
You can then check the radio button, “Turn on the system protection.”
4] Update the outdated Device DriversOutdated/obsolete device drivers can also invoke the error code while creating a system image. You can verify the same with the following steps:
A] Checking the updates:
The system will then connect to Microsoft servers and look for optional updates available for your device.
B] Getting the updates:
Once the download is complete, you can install the checked-in drivers.
5] Remove USN JournalPresently, all disk drives are formatted with NTFS and include a unique feature called the USN Journal. It is an updated sequence number that maintains a record of all recent changes made on the root drive. Every day some data is added to the journal since we make several changes to the devices. Once the USN journal exceeds the permissible limit, you may be affected by the 0x81000033 error. To delete a USN Journal, follow the next steps:
A] Formatting the hard disk partitions:
Once this is opened, you can change the drive letter of the System reserved volume. You can then launch the CMD as administrator and run the following codes:
fsutil usn queryjournal F: fsutil usn deletejournal /N /D F:B] Changing the Drive path command:
6] Inspect the hardwareIf the backup error persists, you can check if the hard disk is functioning properly on your PC. Follow the given below steps.
A] Launching command prompt as an administrator:
Press Win + R. Type “CMD” and then press Ctrl + Shift + Enter to launch Command Prompt as an administrator. You can then confirm Yes in the UAC window to confirm access to the console.
On the prompt window, type the following and press Enter:
chkdsk C: /f /r.The command will not run as the root drive since it is already in use. Type “Y’ and press Enter to confirm the code.
B] Getting a report on the hard disk:
Reboot the PC after leaving the command prompt window.
You can then receive a report mentioning whether you can still use the hard disk or if it requires a replacement.
7] Increase System Reserved Partition sizeIn case the error occurs because of less disk space in the System Reserved Partition, you should try to increase the disk space. Also, you cannot increase the said size normally. You can create a new system volume and allocate it as the new System Reserved Partition. You can do the same with the following steps:
1] You need to first decide the drive letter for the newly created system volume. Press Win + E to start File Explorer and check all pre-existing letters.
Launch the Command Prompt window as an administrator.
2] On the elevated window, copy the following and hit Enter: chúng tôi /s C:Windows /s G: (In this code, “C” is the root drive, and “G” is the letter for the newly created system volume.
3] You can then execute the following commands.
DISKPART4] After running the codes, you can restart the PC and see if the error is resolved.
With the several solutions mentioned above, we hope you resolve the Backup 0x81000033 error. You can try again to create a system backup after rebooting your PC. We hope you find this useful. Do let us know in case of any suggestions.
What is Windows Stopcode?The Windows Stopcode provides details about why the system is suddenly dead. It is also known as bug check and includes every type of Windows error that the PC may encounter.
Related: The backup failed with 0x80780119 error.
How do you know if the system protection is enabled?Fix: Windows Live Mail Error 0X8007007A On Windows 10/11
Fix: Windows Live Mail error 0x8007007A on Windows 10/11
825
Share
X
Windows Live Mail is a popular mailing tool used by Windows users all over the world.
However, it has its own share of bugs, such as error 0x8007007A.
To learn more about Windows Apps, visit our dedicated Apps section.
If you’re interested just in email tools, we have a Mail section just for that.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
Error 0x8007007A may show up if you use Windows Live Mail to send and receive emails on Windows 10. This error usually roots from a conflict between One Drive and Live Mail.
More particularly, this error mostly shows up when users try to send images, which are uploaded from OneDrive, in their emails.
In this article, we look into some troubleshooting methods to resolve Windows Live Mail error 0x8007007A.
How do I fix Windows Live Mail error 0x8007007A? 1. Switch your email server to another email clientThe built-in email client that comes with Windows is decent. It has all the basic functionalities most people need.
But if you want more, or you simply have problems, errors , or bugs with it, it’s time to consider making a switch. You won’t lose any emails, and you will gain new features.
It’s a win-win situation if you choose MailBird – winner of Most popular mail alternative 2023.
Compatible with common email services such as Outlook, Gmail , and Yahoo as well as private services.
Easily add multiple emails accounts and see them in one unified Inbox
Integration with WhatsApp, Dropbox, Twitter, Facebook, Slack , and many more
Our favorite: LinkedIn lookup with the app
That’s it. The best alternative to your current email client.
Mailbird
The best email client for Windows
Free trial Visit website
2. Delete Pending emails from Outbox
Find the Outbox on the left pane of the Windows Live Mail window.
Select all pending emails that have Pictures attached as albums. (Make sure to keep a backup if it’s something important).
Delete the selected emails.
Compose a new email with text only. Try sending it.
The first thing to try in order to resolve error code 0x8007007A is to delete all pending emails from the Outbox of your Windows Live account.
Expert tip:
Error code 0x8007007A will most likely not appear anymore. If it does, move onto the next solution.
3. Send images as Attachment, not Album.
On Windows Live mail, compose a new email.
Find the picture you want to attach & select it.
In case you want to send multiple images in the same email, follow the same steps and when selecting pictures, hold the Ctrl key while selecting the intended pictures.
Once you’ve done this, and added the necessary body and subject to the email, simply send it.
The second thing to try is sending images as attachments and not albums. Doing this will almost certainly resolve Error code 0x8007007A. Follow these steps:
Hopefully this didn’t produce error code 0x8007007A. Just in case it did, move onto the next solution.
4. Remove and reconfigure the WLM account
Open Windows Live mail and go to Tools.
Find and open Accounts from the menu.
Select the email address you intend to remove.
Removing and reconfiguring your Windows Live mail account could also help resolve error code 0x8007007A.
Try sending an email again. If error code 0x8007007A persists, move onto Solution 4 below.
5. Fix Windows Live Mail
Open Control Panel.
Go to Programs and Features.
Find and select Windows Essentials.
In the dialogue that opens, select Repair all Windows Live programs.
Wait until the process completes. Once it does, restart your computer.
Hopefully one of these solutions worked for you. If it didn’t try contacting Microsoft Support.
Still experiencing issues?
Was this page helpful?
x
Start a conversation
Update the detailed information about Fix: Avg Installation Failed On Windows 10/11 on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!