Trending February 2024 # How To Find Windows Experience Index Scores In Windows 8.1 # Suggested March 2024 # Top 7 Popular

You are reading the article How To Find Windows Experience Index Scores In Windows 8.1 updated in February 2024 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Find Windows Experience Index Scores In Windows 8.1

The Windows Experience Index benchmark tool has been around in Windows since Microsoft first introduced it in Windows Vista. For those of who are not familiar with the tool, what it essentially does is measure your PC’s performance and breaks it down into five main categories: processor, memory, graphics, gaming graphics and hard disk.

The Windows Experience Index isn’t really known to accurately measure the performance of PCs, but if you’re comparing your system with other PCs, it can be quite a useful tool to identify hardware deficiencies.

Starting with Windows 8.1, Microsoft decided to remove the graphical interface to the Windows Experience Index. What this essentially means is that this isn’t available in Windows 8.1 anymore:

The underlying benchmark utility which measured the PC’s performance is however still available in Windows 8.1. This utility, known as the Windows System Assessment Tool (WinSAT), can be used to find your PC’s performance; you just need to type a couple of commands from the command line.

2. Once your Command Prompt is open, type in

winsat prepop

and press Enter. This will run the benchmark and store the results on your PC as XML files. Depending on your PC processor, this may take anywhere from 10 seconds to 2 minutes.

3. Once that’s done, open the Windows Powershell as administrator.

Once it’s open, type in 

Get-WmiObject

-Class

Win32_WinSAT

and hit Enter on your keyboard. This will analyze the results in the XML files we created earlier, then present them as scores for each category.

Here’s what everything actually is:

CPUScore is the score for the processors on the PC.

D3DScore is the score for the 3D graphics capabilities of the PC.

DiskScore is the score for the sequential read throughput on the system hard disk.

GraphicsScore is the score for the graphics capabilities of the PC.

MemoryScore is the score for the memory throughput and capacity of the PC.

That’s it. If you’re looking for your base score, look at the number next to “WinSPRLevel”, which is just the lowest score of the five categories.

Shujaa Imran

Shujaa Imran is MakeTechEasier’s resident Mac tutorial writer. He’s currently training to follow his other passion become a commercial pilot. You can check his content out on Youtube

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

You're reading How To Find Windows Experience Index Scores In Windows 8.1

How To Find Deviceharddiskvolume3, 4, 5 In Windows 11/10

When working with Windows operating systems, it’s common to encounter error messages that reference specific hard disk volumes, such as DeviceHarddiskVolume3. These references may seem confusing at first, but they’re actually quite simple to understand and use.

In this article, we’ll explain what these references mean and provide a comprehensive guide on how to tell which drive each hard disk volume refers to in Windows 11 or Windows 10. The step-by-step instructions will enable you to locate the specific device or volume path needed to resolve any file access events issues.

Before we dive into how to find hard disk volume references in Windows, it’s important to understand what they are and why they’re used.

Also see: How to Hide a Drive in Windows 11

In Windows, hard disk volumes are used to organize data on physical hard drives. Each volume is assigned a unique reference, such as:

DeviceHarddiskVolume3

DeviceHarddiskVolume4

DeviceHarddiskVolume5

DeviceHarddiskVolume1

DeviceHarddiskVolume2

DeviceHarddiskVolume6

This reference is used to identify the volume and access its contents.

When troubleshooting issues with Windows, you may encounter error messages that reference a specific hard disk volume. For example, you might see an error message like this:

This error message is telling you that the Windows operating system can’t find the svchost.exe file on the third hard disk volume. To fix the issue, you’ll need to locate the volume and the file.

Related issue: Service Host Local System (svchost.exe) High CPU, Disk or Memory Usage

Now that we understand what hard disk volume references are, let’s take a look at how to find the hard disk volume number and tell which drive each volume is referring to in Windows 11/10.

This method provides you with a comprehensive list of all device names and their corresponding volume paths on your local machine. It leverages PowerShell to query the Windows Management Instrumentation (WMI) class Win32_Volume for the drive letter and then uses the QueryDosDevice function from the Kernel32 module to obtain the device path.

To list all the drive letters and their corresponding hard disk volume numbers on your Windows system, follow these steps:

Open Notepad and paste the following PowerShell script: $DynAssembly = New-Object System.Reflection.AssemblyName('SysUtils') $AssemblyBuilder = [AppDomain]::CurrentDomain.DefineDynamicAssembly($DynAssembly, [Reflection.Emit.AssemblyBuilderAccess]::Run) $ModuleBuilder = $AssemblyBuilder.DefineDynamicModule('SysUtils', $False) $TypeBuilder = $ModuleBuilder.DefineType('Kernel32', 'Public, Class') $PInvokeMethod = $TypeBuilder.DefinePInvokeMethod('QueryDosDevice', 'kernel32.dll', ([Reflection.MethodAttributes]::Public -bor [Reflection.MethodAttributes]::Static), [Reflection.CallingConventions]::Standard, [UInt32], [Type[]]@([String], [Text.StringBuilder], [UInt32]), [Runtime.InteropServices.CallingConvention]::Winapi, [Runtime.InteropServices.CharSet]::Auto) $DllImportConstructor = [Runtime.InteropServices.DllImportAttribute].GetConstructor(@([String])) $SetLastError = [Runtime.InteropServices.DllImportAttribute].GetField('SetLastError') $SetLastErrorCustomAttribute = New-Object Reflection.Emit.CustomAttributeBuilder($DllImportConstructor, @('kernel32.dll'), [Reflection.FieldInfo[]]@($SetLastError), @($true)) $PInvokeMethod.SetCustomAttribute($SetLastErrorCustomAttribute) $Kernel32 = $TypeBuilder.CreateType() $Max = 65536 $StringBuilder = New-Object System.Text.StringBuilder($Max) $ReturnLength = $Kernel32::QueryDosDevice($_.DriveLetter, $StringBuilder, $Max) if ($ReturnLength) { $DriveMapping = @{ DriveLetter = $_.DriveLetter DevicePath = $StringBuilder.ToString() } New-Object PSObject -Property $DriveMapping } }

Save the Notepad file with a .ps1 extension, such as List-drives-and-hard-disk-volumes.ps1.

Run the List-drives-and-hard-disk-volumes.ps1 script from PowerShell to list all drive letters and their corresponding hard disk volume paths on your Windows 11 or Windows 10 system.

Recommended resource: Run CMD, PowerShell or Regedit as SYSTEM in Windows 11

To run the List-drives-and-hard-disk-volumes.ps1 script from PowerShell, follow these steps:

Change the execution policy (if needed): By default, PowerShell may not allow you to run scripts due to its restrictive execution policy. To change the execution policy, type the following command and press Enter: Set-ExecutionPolicy RemoteSigned

When prompted, type Y and press Enter to confirm the change. This command allows you to run scripts that you created or downloaded from the internet, as long as they are signed by a trusted publisher.

Navigate to the script’s location: Use the cd command to navigate to the directory where you saved the “List-drives-and-hard-disk-volumes.ps1” script. For example, if you saved the script in the Desktop directory, type the following command and press Enter: cd C:UsersusernameDesktop

Replace the username with your actual user name in your Windows system.

Run the script: Type the following command and press Enter to run the List-drives-and-hard-disk-volumes.ps1 script: .List-drives-and-hard-disk-volumes.ps1

The script will execute and display the device names and their corresponding volume paths for all the drives on your local machine.

Set the execution policy back to its default value: After running the script, it’s recommended to set the execution policy back to its default value. To do this, type the following command and press Enter: Set-ExecutionPolicy Restricted

Remember, you need to have administrative privileges to run the script, as it accesses system-level information.

Useful tip: How to Merge Two Drives in Windows 11

Here’s a more detailed explanation of what the script does:

The script first creates a dynamic assembly called ‘SysUtils’ and defines a P/Invoke method for calling the QueryDosDevice function from the Kernel32 module.

It sets the maximum length of the StringBuilder object to 65536, which allows it to store the device path information.

The script then uses Get-WmiObject to query the Win32_Volume class for drive letter information. It filters the results to include only objects with a drive letter.

For each drive letter, the script calls the QueryDosDevice function with the drive letter as the input. The function returns the length of the device path string, which is then used to create an object containing the drive letter and device path.

Finally, the script outputs the device letter and device path for each drive.

Similar problem: Hard Drive Doesn’t Show Up After Clone in Windows 11

This method allows you to find the device path for a specific drive letter by using a similar approach as Method 1. However, instead of listing all the device names and their corresponding volume paths, this method prompts you for a single drive letter and returns its device path.

To display the device path for a given device name (drive letter), use the following PowerShell script:

Open Notepad and paste the following PowerShell script: $driveLetter = Read-Host "Enter Drive Letter:" Write-Host " " $DynAssembly = New-Object System.Reflection.AssemblyName('SysUtils') $AssemblyBuilder = [AppDomain]::CurrentDomain.DefineDynamicAssembly($DynAssembly, [Reflection.Emit.AssemblyBuilderAccess]::Run) $ModuleBuilder = $AssemblyBuilder.DefineDynamicModule('SysUtils', $False) $TypeBuilder = $ModuleBuilder.DefineType('Kernel32', 'Public, Class') $PInvokeMethod = $TypeBuilder.DefinePInvokeMethod('QueryDosDevice', 'kernel32.dll', ([Reflection.MethodAttributes]::Public -bor [Reflection.MethodAttributes]::Static), [Reflection.CallingConventions]::Standard, [UInt32], [Type[]]@([String], [Text.StringBuilder], [UInt32]), [Runtime.InteropServices.CallingConvention]::Winapi, [Runtime.InteropServices.CharSet]::Auto) $DllImportConstructor = [Runtime.InteropServices.DllImportAttribute].GetConstructor(@([String])) $SetLastError = [Runtime.InteropServices.DllImportAttribute].GetField('SetLastError') $SetLastErrorCustomAttribute = New-Object Reflection.Emit.CustomAttributeBuilder($DllImportConstructor, @('kernel32.dll'), [Reflection.FieldInfo[]]@($SetLastError), @($true)) $PInvokeMethod.SetCustomAttribute($SetLastErrorCustomAttribute) $Kernel32 = $TypeBuilder.CreateType() $Max = 65536 $StringBuilder = New-Object System.Text.StringBuilder($Max) $ReturnLength = $Kernel32::QueryDosDevice($driveLetter, $StringBuilder, $Max) if ($ReturnLength) { Write-Host "Device Path: "$StringBuilder.ToString() } else { Write-Host "Device Path: not found" } Write-Host " "

Save the Notepad file with a .ps1 extension, such as Get-device-path-from-drive-letter.ps1.

Run the Get-device-path-from-drive-letter.ps1 script from PowerShell. When prompted, enter the drive letter for which you want to retrieve the device path.

To learn how to run the .ps1 PowerShell script you’ve created, follow the instructions as stated in the previous method.

Here’s an overview of what the script does:

As in Method 1, the script creates a dynamic assembly called ‘SysUtils’ and defines a P/Invoke method for calling the QueryDosDevice function from the Kernel32 module.

The script prompts you to enter a drive letter by using the Read-Host command. Make sure to enter the drive letter without a trailing backslash (e.g., “C:”, not “C:”).

It sets the maximum length of the StringBuilder object to 65536, allowing it to store the device path information.

The script calls the QueryDosDevice function with the input drive letter. If the function is successful, it returns the length of the device path string.

If the QueryDosDevice function is successful, the script outputs the device path for the input drive letter. Otherwise, it displays a message indicating that the device path was not found.

These two methods provide flexible options for obtaining the hard disk volumes information in Windows 11 or 10. Method 1 is useful when you need a comprehensive list of all drive letters and their corresponding volume paths, while Method 2 is more targeted, allowing you to retrieve the hard disk volume path for a specific drive letter. Both methods use PowerShell scripts, making it easy to integrate them into your system management or troubleshooting workflows.

How Does Windows Find My Location Automatically?

Just like smartphones use our physical location to recommend shops and restaurants or help us with directions, Windows does the same thing. However, Smartphones using our physical location make sense as it asks for location permission. But how does Windows find my location automatically? Most computers do not come with GPS, which can help the computer to detect our location. Well, if you have been thinking the same, then in this post, I will be explaining everything you need to know about Windows location usage.

How does Windows find my location automatically?

As per Microsoft, there are a few key factors that help them to find your exact location. These key factors are GPS, nearby wifi hotspots, IP addresses, or cell towers.

Using these details, Windows can determine the precise geographic location of your Windows device so it can recommend related news, shops, or places to visit.

However, Windows’s accuracy in finding your physical location depends on your device capabilities. For instance, if it comes with a GPS, it will be easier for Windows to know your actual location. If there is no GPS, it will use other methods which might not be accurate enough to know your location.

Also, if your location service is enabled, your Windows PC will share details like a wireless access point, cellular owner, and precise GPS location to Microsoft. Then Microsoft will use your shared data to improve its location service. Also, the data gets shared with Microsoft’s location service providers like HERE and Skyhook in some instances.

Also, Microsoft shares your location information with apps that require location information. But you can always allow and disallow apps that access your location information.

But if you don’t share your location service with other apps, they will still have access to it. But the location data will have lower accuracy.

How to Manage location settings in Windows?

Follow these suggestions to manage Location settings in Windows. Be aware that changing settings do affect the overall experience. However, it is true if you are using location-based apps.

Location Service

Location History

Default Location

You will not need an administrator account to get these done. Every user can set its location service.

1] Location Service

Go to Windows Setting using Win + I.

Over here, you will find two settings.

The first setting is location services; you can keep it turned on/off depending on your needs. If you keep it turned on, the location will be available to Windows and anyone using your computer.

Once you enable Location services, you will get the second option: Let apps access your location. Using this, you can allow or disallow apps that can access your location information.

Once you change the settings, apps and browsers will behave based on these settings.

Read: How to turn on or off Location Scripting on Windows.

2] Location History

As mentioned earlier, Windows does share your location info with specific Windows apps and services. However, when the location setting is one, the location looked up by apps or services will be stored on the device for 24 hours and then deleted.

You can easily find this app on the location settings page. Apps that use location service will be labeled as Uses location history.

To clear location history, you can follow the below steps:

Use Win + I to open Windows Settings

It will delete location history from Apps that had accessed the history before it was cleared.

3] Default Location

Windows gives you the option to set a default location. The default location will be used when Windows fails to detect the precise location. To set it, follow the below steps:

Go to Settings.

It will launch the Windows Maps app.

From there, choose your default location, and you are good to go.

Conclusion

So that was all about how Windows find your location automatically and how you can manage your location settings. So go ahead and check the Windows location settings out.

You may choose as per your usage. If you are too concerned about your location, we suggest using a VPN and strict browser settings instead of changing Windows.

Should I allow Windows to track my location?

It entirely depends on what features you are using on your Windows machine. For instance, if you use Windows maps and other location-based apps, you will need to allow Windows to track your location. But if your activities do not include anything related to location, then there is no need to allow Windows to know your physical location.

Read: How to turn on or off Location Scripting on Windows 11/10

Is it safe to allow Browsers to find my location?

Read: How to Disable Geolocation in Firefox, Chrome, and Edge.

Why is my PC location wrong?

There can be multiple reasons for this. Either Windows settings don’t allow the apps or browser to find the location, or ISP is offering an incorrect location. One of the ways Windows finds the PC location is by enquiring about the server location of the ISP. If the server is not around your location and in a different city, this can also result in an incorrect location.

Also read: How to change or set Device usage in Windows 11

Why does my PC IP show a different location on the Internet?

It’s because of the ISP, or you are using a VPN. Any location service queries the ISP or the Server through which you are connected and gets the location. The only way out is to allow the apps to get accurate location when they prompt about it. But that is also not foolproof.

4 Quick Ways To Fix Windows 8.1 Update Not Working

4 Quick Ways to Fix Windows 8.1 Update not Working Apply these fixes to resolve Windows 8.1 not updating error

2

Share

X

If the Windows 8.1 update is not working on your PC, you won’t be able to get security updates, so it’s essential to fix this issue.

The Command Prompt is one way to reset the affected components and fix this problem.

Ensuring that you have downloaded the latest update package on your device is another way of quickly solving this problem.

Freeing up space and using the Windows Update troubleshooter is one of the best ways to deal with this issue.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

Updating Windows 8.1 is a pretty straightforward process, but as with many other processes, this one does come with its share of errors.

Some of the most common error codes that indicate Windows 8.1 update is not working properly are the following: 0x0xc1900223223, 0x80240034, 0x8007000E, 0x80242006​, 0x80244018​, 0x80D02002​, 0x80246017​, 0x80240438​, 0x80070070​, 0x8007000D​, 0x80246008​, 0x80096004​, 0x80070020. 

One of the most common reasons why this error code appears and Windows is not updating is related to not having enough free space available.

We will explore in this article how you can quickly fix the Windows 8.1 update if it’s not working, so keep on reading.

Here are some of the most common reasons that would trigger Windows 8.1 updates not downloading errors.

Some important Windows Update files are missing or corrupted.

There is not enough free disk space available.

Some non-Microsoft apps are interfering with the Windows Update process.

The Firewall is blocking the update.

The Windows Update tool itself is experiencing some issues.

There is a virus or malware on your PC.

1. Rename the software distribution backup folders

This is one way to fix Windows 8.1 update if it’s not working. Alternatively, you can also use the Windows Update reset script to achieve the same results faster.

This simple solution might help if Windows 8.1 update is not working, so be sure to try it.

3. Fix Windows file corruption

If Windows 8.1 update is not working, your file may be corrupted. However, you should be able to fix them with DISM and SFC scans.

4. Ensure you have enough space

A 32-bit OS device needs at least 16 GB of free space, or 20 GB for a 64-bit OS, to perform the update correctly. Therefore, making sure you have enough space on your device is mandatory.

You can free up space on your device by deleting unnecessary files and folders and even deleting apps you are no longer using.

Using a dedicated tool is the easiest and more reliable way of freeing some space on your device, ensuring that you will not delete by mistake any critical files.

Fortect

Clean your PC easily in minutes with this fantastic tool while ensuring your device’s privacy.

Free Trial Download now

Can I upgrade my Windows 8.1 to Windows 10 for free?

Visit the Microsoft website.

Download the Windows 10 installation media creation tool.

Launch the program on your PC.

Accept the agreement.

Choose Upgrade this PC now.

Hit the Next button.

Follow the on-screen instructions.

Hit the Install button.

Do note that the free Windows 10 upgrade offer ended way back for the Windows 8 OS. However, you can still use the Windows 8 product key to activate the Windows 10 copy, the option which might end soon as well.

With this last suggestion, we will conclude our article. We hope one of the solutions presented in this article will help you successfully solve the Windows 8.1 update not working problem.

Was this page helpful?

x

Start a conversation

How To Harden Windows Defender In Windows 10

Windows Defender is pretty lightweight and provides a good basic protection while running silently in the background. You can increase the protection levels and harden Windows Defender with a few changes to the Group Policy Editor or to the Registry Editor. Here’s how to do it.

Before making any changes, backup Windows Registry or create a system restore point. It helps you to revert back if you don’t like the changes or if anything bad happens while editing or changing system settings.

Using Group Policy Editor

Group Policy Editor provides an easy and straightforward way to strengthen Windows Defender. To open Group Policy Editor, press Win + R, type gpedit.msc and press Enter.

On the right panel you will see four different policies. Configure them as instructed below, following the below order.

Join Microsoft MAPS: The first thing you need to do is join Microsoft’s MAPS (Microsoft Advanced Protection Service) program. MAPS is an online community that is aimed at quickly detecting lesser-known threats and can even stop new malware infections.

Send file samples when further analysis is required: For MAPS to work properly you need to submit file samples so that it can scan and check with the online community. Open the policy and select the “Enabled” option. Under the Options section you can select between three options: send safe samples, send all samples, and always prompt.

Generally, Windows Defender blocks any suspicious file and scans it in the cloud. By default, the time-out is set to ten seconds. If you want to you can extend the time-out up to sixty seconds.

To do that open the “Configure extended cloud check” policy, select the “Enabled” radio button and then enter the number of seconds under the Options section. You can extend the time up to fifty seconds. So if you enter fifty seconds, then the total time-out for cloud check is sixty seconds when combined with the default ten seconds.

That’s it, just restart your system.

Using Windows Registry Editor

If you are a Windows Home user, then you will not have access to the Group Policy Editor, but you can use Windows Registry to achieve the same result. Since you need to create multiple keys and quite a few values, I’ve done the work for you. All you have to do is merge those values with your Windows Registry. Download the zip file from here and extract them onto your desktop.

You should have two files: “MPEngine Key.reg” and “Spynet Key.reg.” Their content are as follows.

MPEngine Key.reg:

Windows Registry Editor Version 5.00

[

HKEY_LOCAL_MACHINE

SOFTWAREPoliciesMicrosoftWindows DefenderMpEngine

]

"MpBafsExtendedTimeout"

=

dword:00000019

"MpCloudBlockLevel"

=

dword:00000002

Spynet Key.reg:

Windows Registry Editor Version 5.00

[

HKEY_LOCAL_MACHINE

SOFTWAREPoliciesMicrosoftWindows DefenderSpynet

]

"DisableBlockAtFirstSeen"

=

dword:00000000

"SpynetReporting"

=

dword:00000002

"LocalSettingOverrideSpynetReporting"

=

dword:00000001

The above action will merge the selected reg file with your Registry. Do the same thing with the second registry file.

Once you are done adding, restart your machine. If you want to see what values and keys are added to Windows Registry, open Registry Editor and navigate to the following location:

HKEY_LOCAL_Machine

SoftwarePoliciesMicrosoftWindows Defender

Here you can see the newly-created keys Spynet (MAPS) and MpEngine. By selecting the keys, you can see values associated with that key.

Comment below sharing your thoughts and experiences using the above method to harden Windows Defender.

Vamsi Krishna

Vamsi is a tech and WordPress geek who enjoys writing how-to guides and messing with his computer and software in general. When not writing for MTE, he writes for he shares tips, tricks, and lifehacks on his own blog Stugon.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Fix: List Index Out Of Bounds Error On Windows 10/11

FIX: List index out of bounds error on Windows 10/11

519

Share

X

The List index out of bounds error can appear when trying to run certain applications on your PC.

To quickly solve it, feel free to remove System Mechanic files and check your current antivirus.

Head on to our Troubleshooting Boot Errors section too and you won’t walk away disappointed.

Don’t waste your time and visit our Windows 10 Errors Hub for plenty of other useful solutions.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

List index out of bounds error will prevent you from running your favorite applications, so today we’re going to show you how to fix this error on Windows 10.

Well, it can appear in almost any application, and speaking of this error, here are some common problems that users reported:

List index out of bounds (0), (-1), 1, (2), (3) – This issue can appear due to your antivirus, and if you encounter it, disable or uninstall your antivirus and check if that helps.

Game maker, GTA V, Resident Evil 6 error list index out of bounds – Sometimes this problem can appear with certain applications or games. If this happens, reinstall the application that is giving you this error and check if that helps.

Runtime error list index out of bounds – This problem can sometimes appear because the application you’re trying to run isn’t fully compatible with Windows 10. To fix that, just run the application in Compatibility mode and check if that helps.

List index out of bounds 1 Realtek HD Audio Manager – As we already mentioned, this issue can affect almost any application, and if you’re having this issue, update the affected application to the latest version and check if that helps.

How can I fix the List index out of bounds error? 1. Remove System Mechanic files

According to users, List index out of bounds error can appear when trying to run System Mechanic.

It seems that this error is caused by certain System Mechanic files that can become corrupted, so to fix this problem you need to find and remove those files from your PC.

After removing these files, check if the problem is still there.

Keep in mind that this solution only works for System Mechanic software, so if another application is giving you this problem, you’ll have to use a different solution.

2. Delete the temporary files

According to users, List index out of bounds error can appear due to your temporary files. Many applications create temporary files, and these files can sometimes cause various problems.

After doing that, check if the problem is resolved. If you want, you can also use Disk Cleanup to clean the temporary files and fix this problem.

3. Check your antivirus

If you’re getting List index out of bounds error on your PC, the problem might be your antivirus software. Sometimes your antivirus can block certain files and that will prevent applications from running properly.

To check if your antivirus is the problem, you need to disable certain antivirus features or even disable your antivirus altogether. If that doesn’t help, you might even have to remove your third-party antivirus.

This is perfectly safe to do on Windows 10 since Windows Defender will still protect your system, even if you remove your antivirus.

Once you remove your antivirus, check if the problem is still there. If removing the antivirus solves the problem, you should consider switching to a different antivirus solution.

At the same time, if you need a strong alternative you should choose from the best antivirus solutions for Windows 10 to remove the error once for all.

4. Try running the application in Compatibility mode

List index out of bounds error can sometimes appear if the application you’re trying to run isn’t fully compatible with Windows 10.

This can happen with older applications, but you might be able to fix the problem simply by running it in Compatibility mode.

In case you don’t know, Compatibility mode is a special feature that allows you to run old applications on Windows 10, and you can activate Compatibility Mode by doing as described above.

According to users, using the Compatibility mode might fix this problem for you, but you might have to experiment with different settings until you find the one that works for you.

5. Update the application to the latest version

Expert tip:

The best way to avoid glitches is to keep the application up to date. If you encounter this problem, try to download the latest version of the application and install the latest updates.

After the updates are installed, check if the problem is still there.

6. Rename the Skype directory

Many users reported List index out of bounds error while trying to run Skype.

This error can occur if your files are corrupted, but you might be able to fix the problem by renaming your Skype directory.

This is a simple solution, but keep in mind that it only works with Skype. If you have this problem with any other application, you might want to try using a different solution.

7. Reinstall the problematic application

According to users, sometimes the only way to fix this problem is to reinstall the problematic application. List index out of bounds error can appear in almost any application, and sometimes the only way to fix this problem is to uninstall it.

In case you don’t know, a desirable method is to find a dedicated program like an efficient uninstaller software for your Windows 10 PC. That way, you can safely reinstall the affected application and thus resolve this kind of error.

You should know that such programs can also remove any file and registry entries associated with it from your PC.

Once you remove the application, install the latest version again and the problem should be permanently resolved.

8. Perform a clean boot

If you keep getting List index out of bounds error, the problem might be a third-party application on your PC.

You can do that by following the above steps.

Once your PC restarts, check if the problem is still there. If the issue doesn’t appear, it means that one of the startup applications or services was causing it.

Once you find it, remove the problematic application and the issue should be permanently resolved.

As you can see List index out-of-bounds error can be quite problematic and prevent you from running your favorite application.

However, you should be able to fix this problem simply by reinstalling the problematic application or by updating it.

If that doesn’t work, feel free to try any other solution from this article.

Was this page helpful?

x

Start a conversation

Update the detailed information about How To Find Windows Experience Index Scores In Windows 8.1 on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!