Trending November 2023 # Ps5 Controller Not Connecting To Console? 10 Ways To Fix # Suggested December 2023 # Top 13 Popular

You are reading the article Ps5 Controller Not Connecting To Console? 10 Ways To Fix updated in November 2023 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Ps5 Controller Not Connecting To Console? 10 Ways To Fix

Your DualSense wireless controller may fail to connect to your Sony PlayStation 5 over Bluetooth for several reasons. For example, it could be the controller isn’t synced to the console, its batteries are low, or its firmware isn’t up-to-date.

This troubleshooting guide will walk you through several methods to fix PS5 controller connectivity issues. The problem is likely trivial, and you should be able to resolve it quickly.

Table of Contents

1. Pair the DualSense Controller to Your PS5

Suppose you’re attempting to use a DualSense Wireless Controller with your PlayStation 5 for the first time. In that case, you can’t interact with the console wirelessly unless you register it with the console through a USB cable. Here’s how:

Turn on your PS5 console.

Connect the DualSense controller to a USB port on your PS5. Use the USB Type-C to USB-A cable that comes inside the console packaging.

Press the

button on the controller—it’s between the thumbsticks—to pair it with your console.

After the pairing process, you can disconnect the controller from the console to use it wirelessly.

If you’re setting up a secondary DualSense controller but don’t have a USB-C cable around, you can pair the controller wirelessly. To do that:

Press the

button on the primary controller and select

Settings

on the top right of the PS5 Home Screen.

Scroll down and select

Accessories

On the new controller, hold the

Create

and

buttons simultaneously to put it into pairing mode.

Use the primary controller to select the controller you’re about to pair from the

Accessories found

list on your PS5.

Select

Yes

to confirm you want to register the controller.

Your PS5 should automatically connect to the new controller. Press the PS button on your primary controller if you want to switch back to using it.

Your DualSense wireless controller’s battery can drain quickly during extended vibration-heavy gameplay sessions. If it won’t reconnect or wake up the console from Rest Mode when you press the PS button, it’s probably out of charge.

Connect the controller via USB and let it charge for at least 15 minutes. The light bar surrounding the touchpad pulsates to confirm it’s charging.

If you hate fumbling around with cables, invest in a PS5 charging station or cooling stand so the controller is always on full charge.

Unexpected software glitches with the PlayStation 5 are often an underlying reason behind a DualSense controller that fails to connect via Bluetooth. Restart the console to flush temporary data out of the console’s memory and eliminate problems with wireless connectivity.

If not, press and hold the PS5’s Power button until the console beeps twice to initiate a forced shutdown. Then, press the Power button again to turn it back on.

If your DualSense wireless controller doesn’t pair, charge, or do both over USB, the problem could be USB-related. Try the following:

Inspect the USB-C cable for damage. If it’s frayed or severely bent, confirm if it works on a different device like a PC or Mac. Replace the cable if it doesn’t.

If you use a third-party USB cord, switch to the original that came inside your PS5 packaging or try a different high-quality USB-C cable that supports data transfers.

Connect the cable to a different USB port on your PS5 and check if that makes a difference. Besides the USB port on the front, there are extra ports on the back of the console.

Ensure the USB-C port on the controller is free of dirt. Blow compressed air to rid it of dust (don’t put the nozzle inside the port), or pry out any gunk with a toothpick.

If the problem persists, disconnect and reconnect the DualSense wireless controller to your PlayStation 5. If you don’t have another controller that you can use to interact with the console, you must factory reset the malfunctioning controller (more on that further below).

Press the

Options

button and choose

Disconnect

Select

to disconnect the controller.

Restart your PS5 and re-register the controller wirelessly or via USB.

Although the DualSense wireless controller and the PlayStation 5 use Bluetooth 5.1 for connectivity, physical obstructions, reflective surfaces, and interference from surrounding devices can reduce the effective range of the Bluetooth signal.

For example, keeping your console and TV in separate rooms could result in random disconnects or lag. Either use the controller in wired mode or keep the controller and the console nearby.

If the problem persists, try soft resetting your DualSense controller. To do that, press and hold the PS button for 10 seconds until the light bar turns off. Wait another 10 seconds and press the PS button again to turn the controller back on.

If that fails, you must hard reset the PS5 controller. That restores the controller to factory settings and resolves significant connectivity-related issues. To do that:

Turn off your PS5. If you don’t have a secondary controller, press and hold the

Power

button to force shutdown the console.

Insert a SIM-eject tool or paper clip into the small hole on the back of the controller and push against the

Reset

button inside for 3-5 seconds.

Turn on your PS5 and re-register the controller to the console wirelessly (if you have another controller) or over USB.

If your DualSense controller only fails to work wirelessly, remove nearby Bluetooth devices and other wireless equipment—e.g., Wi-Fi routers—that could cause interference.

Sony publishes occasional DualSense firmware updates that improve the controller’s stability and resolve known connectivity issues.

If you have a PC around, you can also update the controller using the “Firmware updater for DualSense wireless controller” utility from the official PlayStation website:

Another reason why your DualSense controller issues can stop connecting is because of buggy or out-of-date PS5 system software. Update your console to fix the problem.

Note: You need a functioning controller to initiate the update.

Scroll down the

System Software

section and select

System Software Update

and Settings

Choose

Update System Software

Select the

Update Using Internet

option.

Wait until your PS5 searches for and installs any pending updates. If you run into issues, update your PS5 via Safe Mode.

If none of the fixes above help, the chances are your DualSense wireless controller is defective or has a completely dead battery—register the controller with a desktop, iPhone, or Android device to verify the problem is hardware-related.

Contact PlayStation Support, and they can help you figure out what to do next. If you bought the controller from a third-party retailer, reach out for a replacement.

You're reading Ps5 Controller Not Connecting To Console? 10 Ways To Fix

Nintendo Switch Pro Controller Not Detected Or Not Connecting

If Switch Pro Controller is not detected or not connecting to your Windows PC, here are some solutions that may help you resolve the issue.

Restart the controller and PC

Try a different USB Port

Disconnect from Switch

Run Hardware and Device or Bluetooth troubleshooter

Use BetterJoyForCemu

Let us talk about them in detail.

Let us start by restarting the controller. This solution will work for you if the controller is glitchy and causing issues. If restarting the controller doesn’t work, restart your computer and check. When your computer starts it tries detecting connected peripherals. In case restarting is to no avail, check the next solution.

You can also try switching your USB port as the port can be at fault here. So, connect the controller to a different port and see if it is detected. USB ports are very durable but at the over-time, they tend to get to collect dust or debris, experience occasional wear and tear, etc. If connecting to a different port worked for you, use it, or contact a tech expert and get the port repaired.

It is pretty common to go back and forth between Nintendo Switch and PC. The problem that a lot of users are facing is when they try to connect the controller to their PC, it gets connected to the Nintendo Switch via Bluetooth. To resolve the issue, you need to go to Switch Settings, navigate to Controllers and Sensors, scroll down and select Disconnect Controllers. It will say that only 2 controllers are connected.

Now, press and hold the little button on your controller and plug it into your PC. This should do the job for you.

If you are using a wireless connection, make sure to turn the Switch off before connecting your controller to the PC

Next up, let us try assigning some work to your computer. If you are connecting with wires, use a Hardware and Device troubleshooter, and a Bluetooth troubleshooter should be used for wireless connection.

Hardware and Device Troubleshooter

To run Hardware and Device troubleshooter open Command Prompt as an administrator and run the following command.

Now, follow the on-screen instructions to carry on with the update.

Bluetooth Troubleshooter

If you are a Windows 11 user, follow the prescribed steps to run the Bluetooth troubleshooter.

Open Settings.

Windows 10 users can follow these steps to run the troubleshooter.

Launch Settings.

Hopefully, it will do the job for you.

If nothing works, then use this workaround. Mind you, it is not a fix, instead, it is a workaround that has worked for several users and should do the trick for you as well. BetterJoyForCemu is third-party software. This app will allow the controller to work with Cemu, which is an emulator for the Wii U console. You don’t have to install Cemu in order to run the emulator, the only thing you need to do is install the app and connect the controller.

So, follow the given steps to install and run the app.

Visit chúng tôi to download the ZIP file.

Now, extract it somewhere and open the extracted folder.

Launch ! Install the drivers in the Drivers folder with administrative privileges.

Then, open the BetterJoyForCemu app.

Make sure that ShowAsXInput is enabled.

Hopefully, this will do the trick for you.

To pair switch Switch Pro Controller with your system, you need to press and hold the small button next to the USB cable for 5-10 seconds. That will allow your computer to detect the Bluetooth device in its range and connect to it. The reason why most people aren’t able to pair their controllers is that they don’t press the button before starting the process. If the issue still doesn’t work, check the solutions mentioned here to resolve the issue.

Read: Xbox One Controller is not recognized by Windows PC

The small button on your controller that’s placed next to the USB port should be pressed in order to run to make the Switch recognize the controller. If that’s not done, your console won’t recognize that the Switch Pro Controller is up and running.

Also Check: USB Gamepad is not recognized or working in Windows 11/10.

How To Fix Airpods Not Connecting To Apple Watch

Are you trying to use your AirPods with your Apple Watch for calls, music, etc., and it fails repeatedly? Let’s show you how to solve this problem and ensure you can connect your AirPods with your Apple Watch.

It’s optional to connect AirPods or Bluetooth buds to make calls on your Apple Watch, get Siri voice feedback, or listen to voice memos you record on it. The tiny Apple Watch speaker lets you do all those things.

However, you must connect AirPods or a Bluetooth device to listen to music synced locally to your Apple Watch. You can’t use the built-in watch speakers for music.

Plus, for longer phone calls, it’s convenient to connect your AirPods to your watch.

If you’re unable to connect your AirPods, the following solutions will address the problem.

Please note that this tutorial applies to all AirPods (1st, 2nd, 3rd generation, Pro, Max) and all Apple Watch models, running a recent version of watchOS.

Most solutions will also work if you can’t connect your Beats, Samsung Galaxy, Pixel, other third-party Bluetooth earphones, or health devices with your Apple Watch. Just make sure you follow the corresponding steps according to your wireless buds model.

When you connect your AirPods with one of your Apple devices, it’s magically available on all your Apple devices via iCloud. That means, once you pair it with your iPhone, the AirPods show up on your Mac, iPad, other iPhone, and Apple Watch. No need to connect them on all devices manually.

Note: The same applies to some Beats headphones (Apple owns Beats).

You will have to manually connect your third-party Bluetooth buds with all your Apple devices. I have a decent third-party headphone. I paired it with my iPhone. But it didn’t show up on my Apple Watch or Mac.

The exact steps to pair a third-party Bluetooth headphone with your Apple Watch differ according to the brand, but overall it’s easy, and the basics remain the same.

Here’s how to connect a Bluetooth device with your Apple Watch:

2) Switch on your Bluetooth device by pressing its power button or taking it out of the case.

3) Press the Bluetooth pairing button on the device. Multiple manufacturers use the same button for powering on and pairing. Read the manual. In most cases, you have to press and hold the button to make the Bluetooth device discoverable. Some headphones may even give audio feedback like “pairing mode on.”

4) In a few seconds, you’ll see the device on the Bluetooth screen of your Apple Watch. Tap to pair it. If the device doesn’t show up, double-check the third-party buds are in pairing mode. Turning Apple Watch Bluetooth off and on should also help.

Before moving further, make sure your AirPods or third-party Bluetooth buds are charged adequately. If not, they won’t pair with any device, including Apple Watch.

Note: If your Apple Watch charger is nearby, take off the watch from your wrist and place it on the charger for a couple of minutes.

Are your AirPods connected to your iPhone, Mac, or another nearby device? If yes, the new Bluetooth connection between your AirPods and Apple Watch might fail.

Once AirPods or the Bluetooth buds are not connected to any other device, try connecting them with Apple Watch, and it should work.

Note: Until you put the AirPods in your ear, it may not say the word “Connected” on the Apple Watch screen.

On the call, music, or the Apple Watch screen where you play some sound, you’ll see an AirPlay audio icon (triangle with three circles on top). Tap it and choose your AirPods or another Bluetooth device. If AirPods are out of their case and Bluetooth buds are switched on, they should connect with the Apple Watch in a few seconds.

You can also choose an audio output device by tapping the AirPlay icon in Apple Watch Control Center, which is accessed by swiping up on the watch face.

I have noticed that when you select your AirPods on the regular or FaceTime call screen, it may fail. This can be a watchOS bug. Here’s a workaround I discovered to address this.

2) Now, open the watchOS Phone or Contacts app and make a call from your Apple Watch. The voice will be routed through the connected AirPods.

1) Open the watchOS Settings app and tap Bluetooth.

2) Scroll down and turn off the Bluetooth switch.

3) After waiting for 30 seconds, tap the same switch to turn Bluetooth on.

1) Swipe up from the bottom of the watch face to see the watchOS Control Center.

2) Tap the airplane icon.

3) After 30 seconds, tap the same icon to disable Airplane mode.

Now, when you select your AirPods as an audio output device, it should work.

Press the side button and swipe left on the apps that show here. Next, tap the red X button to close them.

Press the side button and slide the power off slider to the right. After waiting for a minute, press the same side button to switch on your Apple Watch.

Your Apple Watch will take about 2 minutes to turn off and back on. During this time, keep the AirPods in their charging case and close the lid.

For third-party Bluetooth buds, use its button to turn it off and on.

Once Apple Watch restarts, take the AirPods out of the case and connect it. Most likely, it will be successful.

You can forget AirPods on your iPhone, and it will be removed from the Apple Watch and your other iCloud devices.

Or, when AirPods or other previously connected Bluetooth devices aren’t connecting and working, you can forget and reconnect from your Apple Watch:

1) Open watchOS Settings and tap Bluetooth.

3) Restart your Apple Watch and keep the AirPods in their case.

4) Now, open the case lid (let the AirPods be in the case) and press the button on the back. The case light will turn white. In a few seconds, it’ll appear on your Apple Watch Bluetooth screen. Tap the AirPods name to pair and connect it with your Apple Watch.

If you’re running an older version of watchOS, please update to the latest available version. Similarly, your AirPods also receive firmware updates. Your iPhone updates your AirPods automatically without your intervention. But still, make sure your buds have the latest available firmware version.

If the problem persists, follow the steps to reset your AirPods. Once that’s done, connect them with the paired iPhone.

Once this is done, connect your AirPods to iPhone. After that, try using it with your Apple Watch.

Still no luck? In this case, check if you can use the AirPods with your other devices or not. If they work perfectly, the problem may be with your Apple Watch. One reliable way to fix this is to unpair it from your iPhone (which will erase it) and then set it up again.

I hope by now your AirPods and Apple Watch are playing nice with one another. In most cases, the initial solutions like restarting the device, putting AirPods in the charging case, and disconnecting it from other nearby devices will do the trick.

If not, contact Apple Support to learn about your repair options.

Check out next:

How To Connect An Xbox Controller To Your Xbox Console

How to connect an Xbox controller to your Xbox console

Here’s how to pair and sync your Xbox controller to your console

Get straight to gaming as we show you how to connect and Xbox controller to your Xbox console. You’d think this process wouldn’t require any effort, considering they are part of the same family, but nevertheless, any kind of tech can run into problems.

We are now in the third age of wireless controllers and while they are relatively easy to set up, we sometimes face synchronization issues. We are going to show you how to pair your Xbox controller with your Xbox, which is more or less the same across the Xbox One, Series X, and Series S.

READ NOW: Want to play on PC? Here are the best controllers for the job

You basically have two options for connecting your wireless Xbox controller to the console, using the pair button for a wireless connection, and the USB cable for a wired connection. Of course, you are likely to be searching for the former as a wired connection takes care of everything for you.

How to connect Xbox controller to Xbox: Sync devices

Xbox One controllers are compatible with Series X/S consoles and vice versa. This versatility means that the process below will work no matter which of the latest generation consoles you have.

Another thing to note before going into how you connect the devices is that the Xbox Series X/S wireless controllers have a quick switching feature. This means that if the controller is connected to a Bluetooth device, you can double press the pair button and the controller will switch connection to the last console it was paired to. To switch in the opposite direction, you just need to press and hold the pairing button.

If you would prefer, you can always connect the Xbox controller with its USB cable. For those on Series X and S consoles, you will need a USB C cable, and for those on Xbox One a micro-USB cable. Regardless of which console you play on, your controller should instantly work once plugged in.

Step

Turn on the console & controller

Turn on your Xbox console and then turn on your controller by holding the Xbox button, the light will flash and then remain lit once connected.

Step

Press the pairing button on your console

Now, press and release the pairing button on your Xbox (located towards the front above the USB port on Series X, on the front left, to the right of the USB port for Series S).

Step

Pair your controller

Within 20 seconds of pressing the console pairing button, press the and hold the controller’s pair button (a circular button) until the light on your controller flashes a few times. Once the controller finds the console it will remain lit and you are ready to go.

Press the Xbox button on your controller to open the guide

Head to ‘Profile & system’ and select ‘Settings’

Under ‘Devices & connections’ select ‘Accessories’

On the Xbox wireless controller screen, select the dots (…) to see the firmware version

If it states there is no update available, you have the current firmware, if not, update

Iphone Flashlight Not Working? 10 Best Ways To Fix!

The flashlight has long been a useful iPhone tool that most of us use in dark/ low-lit environments. Whether while trekking in the wild or fumbling in a dark room, we bring on the flashlight to find our way or spot something. That’s why Apple has made it accessible right from the lock screen of your iOS device so that you can bring it into action with ease. Even though this useful feature is designed to work reliably, it’s not immune to failure. But fret not, we’ve jotted down the 9 pro tips to fix your iPhone flashlight if it’s not working.

The flashlight issue could be both hardware and software related. If it’s due to a random software glitch, you can get rid of it by trying out some trusted software hacks. However, if it’s due to a hardware failure, you will need to contact Apple or an authorized iPhone service center. Keeping both these aspects in mind, we’ve suggested the solutions that are likely to troubleshoot the flashlight not working problem on your iPhone.

As both the camera’s flash and the flashlight use the same bulb, it’s better to keep the camera app closed while activating the flashlight to prevent any possible conflict. So, if the camera app is open in the background, make sure to force quit it (swipe up from the home bar or double-press the home button to bring up the app switcher and then swipe up on the app card to kill the app).

Believe it or not, some iPhone cases/covers, accessories, and even films tend to block the flash and prevent it from working normally. So, remove any case or film and then try to use the flashlight on your iPhone. If it starts working now, your case/film was at fault, and not your iPhone.

On iPhone without Home Button: Hold down the volume up/down button and the side button until the power off slider shows up. After that, drag the power off slider to shut down your device. Then, press and hold the side button until the Apple logo appears.

Image courtesy: Apple

On iPhone with home button: Press and hold the side/top button and then drag the power off slider to turn off your device. After that, press and hold the side/top button to reboot your device.

The hard reset aka force restart is slightly more effective than a simple restart when it comes to fixing weird iOS issues. Therefore, you should try this out as well.

On iPhone 8 or later: Press and release the volume up button. Then, press and quickly release the volume down button. After that, press and hold the side button until the Apple logo comes up on the screen.

Image courtesy: Apple

On iPhone 7/7 Plus: Press and hold the side button and volume down button simultaneously until the Apple logo appears on the screen.

On iPhone 6s/6s Plus or earlier: Hold down the home button and the side/top button at once until you see the Apple logo on the screen.

A quick way to test whether or not the flashlight is working is by using the control center. Moreover, you can also adjust the brightness of the flashlight by using its slider.

On iPhone with Face ID: Swipe down from the top right corner of the screen to access the control center.

On iPhone with Home Button (Touch ID: Swipe up from the bottom edge of the screen to bring up the control center.

Now, tap the Flashlight icon to check if it’s working normally. Besides, touch and hold the flashlight icon to access the slider and then ensure that the brightness is set at the highest level.

You should also check whether the flash-bulb itself is working or not. One easy way to do this is to simply use your iPhone’s camera app. Here’s what to do.

Open the camera app on your iPhone and head into the ‘Photo’ option. Here, tap on the arrow icon (or swipe up on the viewfinder) to view extra settings.

Now tap on the flash icon and choose ‘On’ instead of ‘Auto’ or ‘Off’.

Resetting the iPhone to factory default is the sort of solution that comes in handy when dealing with persistent issues. Since it has always been like a go-to troubleshooter for fixing major software-related issues, it’s worth trying out as well.

If the flashlight continues to misbehave on your iPhone, update the software. If the issue is due to a rare software bug, updating the software can resolve it.

This one has long been a nuclear solution for iPhone, especially when faced with a complex issue. So, if none of the above-mentioned tricks has worked in fixing the iPhone flashlight not working issue, restore your iPhone from the previous backup.

Bear in mind that it will erase your entire iPhone wiping out everything that exists on your iOS device. Therefore, do not proceed with it until you have fully backed up your device.

Once your device has been successfully erased, follow the setup assistant to set up your device. Along the way, you will get an option to restore your iPhone from an iCloud backup.

Alternately, you can also use your Mac or Windows PC to restore your iPhone from the previous backup.

If your iPhone flashlight has not yet started to work normally, there is a good chance that the issue could be related to hardware. And in this situation, you should contact Apple Support without any delay.

That’s it! Hopefully, your iPhone flashlight is back to normal. As I said above, if the problem is due to the ill-functioning of the software, a hard reset or software update is more than capable to resolve the issue. However, if it’s because of hardware failure, contacting a trusted iPhone repair center is always the right way to go. Anyway, let us know the hack that has fixed your iPhone flashlight. And if you know any other reliable solution for resolving this issue, tip us about that as well.

How To Connect A Ps5 Controller With Nintendo Switch

The Joy-Cons that come with Nintendo Switch was truly a revelation. As a launch title, 1-2 Switch made perfect use of the controller, which meant a frivolous good time spent with your friends on game nights.

That doesn’t rule out the possibility of using different controllers with the Switch. The PS5 controller, which could be the GOAT controller of this generation, works without a hitch when connected to Nintendo Switch.

So without wasting any more time, let’s connect your Switch to the PS5 controller.

How to Connect a PS5 controller with Nintendo Switch

Let’s get over the things that we need.

A PS5 controller, Nintendo Switch, Bluetooth Adapter and a USB C to USB A dongle(if using Switch lite).

The PS5 controller has built-in Bluetooth 5.0, which it uses to connect with the PS5 console. And the Switch also comes with Bluetooth. But why do we need an adapter for the communication anyway?

Nintendo has placed this limitation so that the Joy-Cons can work without interruptions when connected to the Switch. Thus to use any other controller, you need a separate Bluetooth device that handles the communications between the devices.

As for the Bluetooth adapter, there are thousands of them on Amazon or Best Buy. You can use any of them, and they will work just fine. Personally, I think the 8bitdo USB Bluetooth adapter is the best when it comes to the Switch and any other consoles.

Now that everything is covered let’s pair up the controller.

Check our separate post for is Nintendo Switch worth it.

Follow the steps to connect your PS5 controller with Nintendo Switch:

Connect the Nintendo Switch to the dock and plug in the Bluetooth Adapter on the USB port. (For the Switch lite, connect the Bluetooth adapter to the Type-C port using the USB C to USB A adapter)

Tap on the gear icon on the Switch’s touchscreen to go to Settings.

Scroll down to Controllers and Sensors and Turn on Pro Controller Wired Communication.

Now press the pairing button on the Bluetooth device plugged into the Switch.

On the PS5 controller, press the create and PS button simultaneously.

You should see a blue light blinking on the PS5 controller. When it settles to a solid color, the pairing is done. Now you can navigate the Switch’s interface by pressing the buttons on the PS5 controller.

Note:The flagship features of the PS5 controllers, which made it’s name, won’t work on the Nintendo Switch. They include haptics, adaptive triggers, a built-in microphone and headphone jack. However, the touchpad and gyro sensor work fine with all games.

Related contents you should read about how long do Nintendo Switch charge last.

Frequently Asked Questions

Can I use my PS5 controller on Nintendo Switch?

Yes, you can use the PS5 controller with Nintendo Switch. You just need a Bluetooth adapter that will connect it to the console.

Can you plug in your PS5 controller without an adapter into a Switch?

No, a Switch will not detect a controller plugged into the USB C port. You need a Bluetooth adapter connected to the USB C port that connects the PS5 controller to the Switch.

How to connect the PS5 controller to Switch lite?

You need a USB C to USB adapter and a Bluetooth adapter. Connect the Bluetooth adapter to the USB adapter, which connects to the type-c port in Switch lite. Next, put the adapter and the PS5 controller in the pairing mode, which will connect them.

Final Words

The PS5 controller should work with all your games on the Switch. With improved vibrations and gyro controls, the extended gaming sessions will not tire you out.

Nintendo also has the Pro controllers that come at a price similar to the PS5 controller. But if you have a PS5 already, why not save some cash while having a great gaming experience?

So, do let us know how the PS5 controller fared with you.

With that said, it’s time for goodbye.

Update the detailed information about Ps5 Controller Not Connecting To Console? 10 Ways To Fix on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!