You are reading the article Root Samsung Galaxy Mega 6.3 Gt updated in November 2023 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Root Samsung Galaxy Mega 6.3 Gt
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: ROOT SAMSUNG GALAXY MEGA 6.3
Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
Please know that this page is meant for Samsung Galaxy Mega 6.3 with model no. GT-I9200 only. Do not use the procedures discussed here on other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully root your Samsung Galaxy Mega 6.3.
In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.
► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the Pre-Rooted Kernel file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).
PRE ROOTED KERNEL ODIN FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing with Odin, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the Odin file, Odin_v3.09.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:
Odin3 v3.09.exe
Odin3.ini
Download the kernel file, vcoreroot-v2.tar and place it in the same folder where you extracted the Odin files. You’ll have the following files in the folder now:
Odin3 v3.09.exe
Odin3.ini
vcoreroot-v2.tar
Disconnect the Galaxy Mega 6.3 from PC if it is connected.
Boot your Samsung Galaxy Mega 6.3 into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Mega 6.3 as said above.
If you have already installed driver, then uninstall them and re-install back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the firmware file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps. (Step 7 and Step 8)
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Mega 6.3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Mega 6.3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
FEEDBACK US!
It was easy to root your Galaxy Mega 6.3 with Odin, right? Let us know how you plan to use root privileges on your Galaxy Mega 6.3.
Your suggestions and queries, if any, are most welcomed!
You're reading Root Samsung Galaxy Mega 6.3 Gt
Easily Root Samsung Galaxy Grand Quattro Gt
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: ROOT SAMSUNG GALAXY GRAND QUATTRO
Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings.Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I8552!
Please know that this page is meant only for Samsung Galaxy Grand Quattro. Please DO NOT try the procedures given here on any other device of Samsung or any other company. You have been Warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL THE LATEST CWM/TWRP RECOVERY
Skip this step if you already have latest version of CWM or TWRP recovery installed on your device.
Make sure that you’ve latest version of the recovery installed on your device.
For help on installing recovery on your Samsung Galaxy Grand Quattro, check our exclusive page on CWM recovery for Samsung Galaxy Grand Quattro.
► GET CWM RECOVERY FOR SAMSUNG GALAXY GRAND QUATTRO
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the file given below and transfer it to a separate folder on your phone and remember the location.
ROOT FILEBe sure to transfer the Root file you downloaded above to your phone and remember the location of the files.
You will need to flash it now on your device using either of ClockworkMod (CWM) or TWRP recovery.
We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.
GUIDE FOR CWM RECOVERY USERS
Boot into recovery mode. For this:
Power off your device and wait for 5-10 seconds until the device is fully switched off.
Press and hold Volume Up + Home + Power buttons together and release them as soon as you see the Galaxy Grand Quattro logo on your phone’s screen.
└ In Recovery Mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option in recovery.
Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.
Install the Zip file:
Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the SuperSU_v1.65.zip file.
Reboot your device. For this, go back to the main menu of recovery and select reboot system now.
That’s all. Your phone will now reboot. On rebooting your phone will have proper root access.
GUIDE FOR TWRP RECOVERY USERS
Boot into recovery mode. For this:
Power off your device and wait for 5-10 seconds until the device is fully switched off.
Press and hold Volume Up + Home + Power buttons together and release them as soon as you see the Galaxy Grand Quattro logo on your phone’s screen.
└ In Recovery Mode, use Volume buttons to navigate Up and Down between options and use Power button to select an option in recovery.
Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.
Install the Zip file:
Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.
That’s all. Your phone will now reboot. On rebooting your phone will have proper root access.
FEEDBACK US!
It was easy to root your Samsung Galaxy Grand Quattro, right? Let us know how you plan to use root privileges on your Samsung Galaxy Grand Quattro.
Your suggestions and queries, if any, are most welcomed!
Root Samsung Galaxy Tab 3 8.0 3G (Sm
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: ROOT SAMSUNG GALAXY TAB 3 8.0 3G SM-T311
Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
This guide is specifically for the Samsung Galaxy Tab 3 8.0 3G with model no. SM-T311. Do not use the procedures discussed here on any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVER
You must have proper and working driver installed on your windows computer to be able to successfully root your Samsung Galaxy Tab 3 8.0.
In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.
► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the CF Auto Root file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).
CF AUTO ROOT FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing the CF Auto Root, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the CF-Auto-Root file, CF-Auto-Root-lt013g-lt013gxx-smt311.zip, on your computer (using 7-zip free software, preferably). You’ll get the following files:
Odin3-v1.85.exe
Odin3.ini
CF-Auto-Root-lt013g-lt013gxx-smt311.tar.md5
Disconnect the Galaxy Tab 3 from PC if it is connected.
Boot your Galaxy Tab 3 8.0 3G into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
If you don’t get the Added! message, here are some
troubleshooting tips
:
Make sure you have installed driver for Galaxy Tab 3 8.0 as said above in Step 2 about drivers above this guide.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot your phone and PC and then try again.
Load the firmware file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Tab 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Tab 3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 2 of this guide again.
NOTE: It may happen that your phone doesn’t automatically boot into recovery and root your phone. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:
Pull out the battery and re-insert it after few seconds.
Boot your Galaxy Tab 3 8.0 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.
Now, this will start the rooting process and will reboot the phone automatically when the process is done.
FEEDBACK US!
It was easy to root your Galaxy Tab 3 with CF Auto Root tool, right? Let us know how you plan to use root privileges on your Galaxy Tab 3.
Your suggestions and queries, if any, are most welcomed!
Android 5.1.1 Root For Samsung Galaxy S6 Edge [Sm
Samsung blessed the Galaxy S6 Edge SM-G925F with Android 5.1 update early on, build no. G925FXXU2BOFJ, but sadly the root access was blocked on that. The OTA/Odin flash will remove root on Android 5.1, while you had none root solution working. That led to developers burning their midnight oil to find a way to achieve root access again, and today, we can confirm there is surefire success on at least the international Galaxy S6 Edge, model no. G925F, as we wait for other models like G925T (T-Mobile Galaxy S6 Edge) and G925R4 (US Cellular Galaxy S6 Edge).
To root Android 5.1 update on Galaxy S6 Edge, you need to follow the guide below carefully, and flash things exactly in the order as asked. It’s not hard, but it ain’t as simple as one easy CF-Auto-Root flash either. Make necessary backups, and then when you are ready, download the files below and flash them using the guide below to gain superuser root access on Galaxy S6 Edge Android 5.1 update. Credit for Android 5.1 TWRP recovery for S6 Edge goes to , thanks a lot!
→ → For Android 5.1 Root on Samsung Galaxy S6, see this page.
Also, in case you didn’t know, you can install official Android 5.1 update on Galaxy S6 Edge G925i.
Supported devices
SAMSUNG GALAXY S6 EDGE, model no. G925F and G925i
Don’t try this on other S6 Edge models like G925T, G925R4, etc.
Don’t try this on Galaxy S6 whose model no begins with SM-G920!
Don’t try on any other device whatsoever!
Instructions
Warning: Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Backup necessary stuff. In case your device is wiped off while following the guide below, it’s good to have a backup of contacts, photos, videos and other files already saved on PC.
Download the Odin software, TWRP recovery, SuperSU and 5.1 kernel file from above.
Connect Galaxy S6 Edge to PC. Transfer the SuperSU and 5.1 Kernel file to phone. Disconnect the phone now.
Disable Reactivation lock. This is very important! For this:
Boot Galaxy S6 Edge into download mode:
Power off your S6 Edge. Wait 6-7 seconds after screen goes off.
Press and hold the three buttons Volume Down + Power + Home together until you see warning screen.
Press Volume Up to continue to download mode.
Extract the Odin file. You should get this file, Odin3 chúng tôi (other files could be hidden, hence not visible).
Connect your Galaxy S6 Edge to PC now using USB cable. Odin should recognize your S6 Edge. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue. Look at the pic below.
You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with device. Mostly, drivers are the problem (look at step 2 above).
If Odin gets stuck at setup connection, then you need to do steps 5 to 11 again. For this, close Odin, disconnect your device, remove battery, insert it back after 5-6 seconds and then start from step 5 again.
Now, we have to boot the device into recovery mode. (At this stage, if you restart it, it won’t probably start all fine.) Do this now:
Alternate method: You can also try this. Do a Power + Home + Volume Down combo to boot into download mode and wait till you boot into Warning screen. Then press Volume Down key to get device to reboot, but right after pressing Volume Down, press and hold the Power + Home + Volume Up combo to reboot into recovery mode.
Once you are in TWRP recovery, we can root Android 5.1 update. On main screen of TWRP, tap on Install, and then browse and select the 5.1 kernel file (Alex-V_Kernel_S6_Edge_1.2.zip). On next screen, just do the Swipe action at the bottom to install the kernel.
Next, tap the Home button at bottom left of the screen to get back to main screen of TWRP. Tap on Install again, and browse and select the SuperSU file (UPDATE-SuperSU-v2.46.zip). Then do the Swipe action action at the bottom to install SuperSU.
Tap on Reboot System to restart the device
That’s it. You should have Root access when you Galaxy S6 Edge boots up. Kudos to awesome team of devs for pulling it off.
[Optional] Create a backup. Reboot into TWRP recovery and then tap on backup, and then select partitions of your choice, preferably all of them, and then do the Swipe action at bottom to start backing up the whole phone! It would always come very handy in case anything bad happens to phone. Go back to TWRP’s main screen by tapping on Home button at bottom left corner.
To reboot into recovery mode when device is On, power off it first, and then press and hold Power + Home + Volume Up button together until you see Samsung logo.
That’s it. Enjoy root access on Samsung Android 5.1 update on Galaxy S6 Edge SM-G925F.
Easily Root Samsung Galaxy S4 Mini, Installs Busybox And Supersu App Too!
WARNING!
Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: ROOT SAMSUNG GALAXY S4 MINI GT-I9190
Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.
To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings.Another way to confirm model no. is by looking for it on the packaging box of your device. It must be GT-I9190!
Please know that this page is meant only for Samsung Galaxy S4 Mini. Please DO NOT try the procedures given here on any other device of Samsung or any other company. You have been Warned!
STEP 1: BACKUP YOUR DEVICE
Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL THE LATEST CWM/TWRP RECOVERY
Skip this step if you already have latest version of CWM or TWRP recovery installed on your device.
Make sure that you’ve latest version of the recovery installed on your device.
For help on installing recovery on your Samsung Galaxy S4 Mini, check our exclusive page on CWM recovery for Samsung Galaxy S4 Mini.
► GET CWM RECOVERY FOR SAMSUNG GALAXY S4 MINI
STEP 3: INSTALLATION INSTRUCTIONS
DOWNLOADSDownload the file given below and transfer it to a separate folder on your phone and remember the location.
S4 MINI ROOTKITBe sure to transfer the Rootkit file you downloaded above to your phone and remember the location of the files.
You will need to flash it now on your device using either of ClockworkMod (CWM) or TWRP recovery.
We’ve got separate guide for CWM and TWRP recovery, so use the guide relevant to the recovery you have installed on your device.
GUIDE FOR CWM RECOVERY USERS
Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:
Power off your device and wait for 5-10 seconds until the device is fully switched off.
Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup And Restore » Backup.
Install the Zip file:
Select Install zip » Choose zip from sdcard (or external sdcard, you know where your files are) » browse to the location where you saved the file and select the Rootkit file.
Reboot your device. For this, go back to the main menu of recovery and select reboot system now.
That’s all. Your phone will now reboot. On rebooting your phone will have proper root access.
GUIDE FOR TWRP RECOVERY USERS
Boot into recovery mode. If you’re rooted, the easiest way to boot into recovery mode would be using the QuickBoot app. If not rooted, then follow the instructions below:
Power off your device and wait for 5-10 seconds until the device is fully switched off.
Create a Nandroid Backup from recovery. It’s optional but very important to do, so that in case something goes wrong you can restore to current status easily. For making a Nandroid Backup, go to Backup » and select all check boxes and swipe on the Swipe to confirm option at the bottom of the screen to confirm backup.
Install the Zip file:
Reboot your device. Go back to the main menu of recovery and tap on Reboot » then, tap on System to reboot your phone.
That’s all. Your phone will now reboot. On rebooting your phone will have proper root access.
FEEDBACK US!
It was easy to root your Samsung Galaxy S4 Mini, right? Let us know how you plan to use root privileges on your Galaxy S4 Mini.
Your suggestions and queries, if any, are most welcomed!
Root Galaxy Note 4 Sm
It has only been a few weeks since the release of Galaxy Note 4 and root for the device is already available. The Galaxy Note 4 SM-N910F is the LTE-A variant of the device based on qualcomm’s APQ8084 chipset. The device is bootloader unlocked by default and that’s why achieving root on the device didn’t took long for Chainfire.
Chainfire’s CF Auto Root works for most Samsung devices, and the Galaxy Note 4 root has also been achieved using the same root package. CF Auto Root uses Chainfire’s own SuperSU app to manage Superuser permissions.
If you’re new to rooting and stuff, then know that rooting your Galaxy Note 4 with CF Auto Root will void your device’s warranty and will also trip the Knox flag. If you don’t want the knox counter to represent that you’ve rooted your phone, then look for a pre-rooted firmware for your Galaxy Note 4. Most pre-rooted firmwares doesn’t trips Knox and keep its status at 0x0, which saves you from letting Samsung service center reps know that you’ve rooted or tinkered with the device’s system.
Enough talk? Okay, let’s get to the action and root Galaxy Note 4 SM-N910F.
Contents show
WARNING!
GUIDE: ROOT GALAXY NOTE 4 SM-N910F
STEP 0: CHECK DEVICE MODEL NO.
STEP 1: BACKUP YOUR DEVICE
STEP 2: INSTALL LATEST DRIVER
STEP 3: INSTALLATION INSTRUCTIONS
ROOT PACKAGE INFOName
Warranty Void Warranty.
Stability Stable Without Any Issues
Root Manager App SuperSU. It manages root permissions for apps on the device.
Credits Chainfire.
WARNING!Warranty may be void of your device if you follow the procedures given on this page.
You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
GUIDE: ROOT GALAXY NOTE 4 SM-N910FBefore you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.
STEP 0: CHECK DEVICE MODEL NO.To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N910F!
This guide is specifically for the Samsung Galaxy Note 4 with model no. SM-N910F. Do not use the procedures discussed here on any other device of Samsung or any other company. You have been warned!
STEP 1: BACKUP YOUR DEVICEBack up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.
For help on Backup and Restore, check out our exclusive page on that linked right below.
► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS
STEP 2: INSTALL LATEST DRIVERYou must have proper and working driver installed on your windows computer to be able to successfully root your Galaxy Note 4. If you are not sure, check the link below.
► SAMSUNG GALAXY NOTE 4 DRIVERS INSTALLATION GUIDE
STEP 3: INSTALLATION INSTRUCTIONS DOWNLOADSDownload the CF Auto Root file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).
CF AUTO ROOT FILE STEP-BY-STEP GUIDEImportant Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after rooting, which might delete internal sd card too, your files will remain safe on PC.
Extract/Unzip the CF-Auto-Root file, CF-Auto-Root-trlte-trltexx-smn910f.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:
CF-Auto-Root-trlte-trltexx-smn910f.tar.md5
Odin3-v3.07.exe
Odin3.ini
tmax.dll
zlib.dll
Disconnect the Galaxy Note 4 from PC if it is connected.
Boot your Galaxy Note 4 into Download Mode:
Power off your phone first and wait for 6-7 seconds after display is off.
Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.
If you don’t get the Added! message, here are some troubleshooting tips:
Make sure you have installed driver for Galaxy Note 4 as said above.
If you have already installed driver, then uninstall them and reinstall back.
Connect using a different USB port on your PC.
Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.
Reboot phone and PC and then try again.
Load the recovery file (extracted in Step 1) into Odin as instructed below:
Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)
Double check the above two steps.
If you see FAIL message instead of the RESET or PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.
NOTE: It may happen that your phone doesn’t automatically boot into recovery and root your phone. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:
Pull out the battery and re-insert it.
Boot your Galaxy Note 4 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.
Now, this will start the rooting process and will reboot the phone automatically when the process is done.
Feedback Us!It was easy to root Galaxy Note 4 SM-N910F using CF-Auto-Root, right? Let us know how you plan to use root privileges on your Galaxy Note 4 now.
Suggestions are most welcomed!
Update the detailed information about Root Samsung Galaxy Mega 6.3 Gt on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!