Trending December 2023 # Root Xxlp2 On Your Galaxy S2 I9100 Using Cf # Suggested January 2024 # Top 12 Popular

You are reading the article Root Xxlp2 On Your Galaxy S2 I9100 Using Cf updated in December 2023 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Root Xxlp2 On Your Galaxy S2 I9100 Using Cf

We’re sure you flashed the latest Android 4.0.3 XXLP2 firmware on your Galaxy S2. XXLP2 is the latest Ice Cream Sandwich firmware available for Galaxy S2, and it’s better than earlier leaks. If you’re holding on for a better leak, you can try XXLP2.

Moreover, even root kernel from Chainfire is available now. So you can root it using the latest CF-Root kernel, specifically for XXLP2. Read on to find out how. And btw, this will also install Clockworkmod recovery, CWM, on your Galaxy S2, which is what you will need to flash roms, mods, other hacks, or revert back to your old CWM backup of Gingerbread/ICS firmware/rom.

Use this only on Galaxy S2 running XXLP2 firmware.

Compatibility

This rom and the guide below is compatible only and only with Galaxy S2, model number i9100. It’s not compatible with any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to you or your device, we won’t be held liable — you only will be responsible, you’ve been warned!!!

Step by Step Instructions to Root XXLP2:

Download CF-Root kernel first. File name – CF-Root-SGS2_XX_OXA_LP2-v5.2-CWM5.zip. Size 6.14 MB. Once again, be sure to use this only on Galaxy S2 i9100 phone with XXLP2 firmware installed. Not otherwise.

    Unzip the above file once. You will get the .tar file – CF-Root-SGS2_XX_OXA_LP2-v5.2-CWM5.tar. DO NOT extract the .tar file (this might show up as a zip file as well, but do not extract it). You need to flash the .tar file using Odin to gain root access and install the ClockWorkMod Recovery (CWM) alongside. (If you’re getting zImage, it means you’ve extracted the .tar file too! — and that’s not a right thing to do. Use 7-zip (free software) to extract.)

      Download Odin3 v1.83. Filename: chúng tôi Size: 416 KB. Run this file when asked in step 6 below.

        Switch off your phone. Wait for vibration to confirm complete switch off.

        Now, put the Galaxy S2 in Download Mode — press and hold these keys together: Volume Down + Home + Power. On next screen, press Volume Up to continue to download mode. This is required to flash any kernel on the phone.

        Connect your phone to PC now. You should get the message “Added! !” under Odin’s message box in the bottom left (Check screenshot after step 9). If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve the drivers installed.

        Double check step 7 and step 8. Your Odin’s screen should look like this (screenshot below):

          IMPORTANT Note: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, do the following:

          Disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 5.

          After CF-Root is installed, phone will restart automatically. When the Galaxy S2 logo shows up on phone, you can disconnect the cable from phone.

            Your phone is rooted now. The superuser app is included which allows you to give root access to applications. Also, CWM based recovery has been automatically installed too. Use the CWM app in app drawer to boot into recovery and do rom backups and restore. Happy flashing!

            That’s it. You’ve now got a rooted XXLP2 firmware. Thanks to Chainfire as always, for his quick CF-Root updates.

            You're reading Root Xxlp2 On Your Galaxy S2 I9100 Using Cf

            Droid Razr Vs. Galaxy S2

            Samsung unveiled its Galaxy S2 back in January 2011 and since then, every other phone that has launched or announced till date, ahs failed to impress me in the way S2 did. But that devil deal with the S2 seems broken now — even though Galaxy Nexus is still in wraps. The device to catch, grab and then steal my interest like the S2 did is Droid RAZR by Motorola, which packs in 4.3-inch Super AMOLED Advanced display at qHD resolution, 1.2 GHz processor, 4G LTE, 32GB storage space, 1GB RAM and 1780 mAh battery, all in a body that’s just 7.1mm thin. AWESOME!

            Only some days I was discussing with some friends of mine when the world will see a device that’s even thinner than the current slimmest smart gadget, the iPod Touch, at 7.2mm. At first we thought the S2 was too much of a challenge to better at 8.5mm, but when we knew that Samsung’s Galaxy Tab 7.7 was just 7.89mm and in fact, Toshiba’s Excite was even slimmer than that – 7.7mm. So, the gap between iPod Touch’s 7.2mm and Excite android tablet was just 0.5mm — which caused us to believe that maybe Samsung’s Galaxy S3 in mid-2012 will undercut iPod Touch’s display bringing the thickness to less than 7mm.

            Yes, Samsung can do that, we’re quite sure but here we are, surprised by Motorola’s Droid RAZR which unleashed a new war on thickness, or rather thinness, managing every modern high-end spec (which are currently the best to be found on any phone) in 7.1mm thin body — and guess what, it’s still 2011!

            Droid RAZR is a big deal of a phone in terms of specs. But S2 is still a beast and would remain so even after Galaxy nexus gets unveiled some 6 hrs from now. And comparison between Droid RAZR and Galaxy S2 is a the most worth thing we can do for now. So, here you go:

            Droid RAZR vs. Galaxy S2

            Display

            Processor

            Galaxy S2’s 1.2 GHz dual-core Exynos processor has already proved it’s world’s best but it would get very strong competition from the Droid RAZR’s 1.2 GHz dual-core chips, of which details aren’t available in many. We think it’s the OMAP processor by TI and would hold good like the Samsung’s own Exynos processor. But only time will tell which one is better. On videos we’ve seen, Droid RAZR looks very very fast, like the S2, at least.

            Android OS Version

            Galaxy S2 is already running Android 2.3.5 and Droid RAZR will be running the same on launch. The catch is, Samsung’s Galaxy Nexus will run on Android 4.0, so both S2 and Droid RAZR has something to play catch-up with here, quite seriously and quickly.

            Form Factor

            Well, even tough I’ve no complains whatsoever from S2’s design, back cover buttons layout and everything, after using it since June, I think Droid RAZR beats it. The Droid RAZR’s back got Kevlar coating around the edges and in between lies the fabric material, much cooler than plastic — and without making it prone to normal fall-down. Not only back, but Droid RAZR’s front and overall body design is pretty cool, and refreshing too.

            Camera

            Both devices feature an 8MP camera with single LED flash and capable of 1080p video recording. As for the front camera, S2’s got the best thus far grabbing 2MP images and videos from the front but Motorola’s press release says Droid RAZR has got an HD front facing camera while being silent on the MP count.

            Thickness

            Droid RAZR wins — it’s just 7.1mm, as against our dear S2’s 8.5mm. I am still in awe of that — and really thought only S3 will best that, even though I heard a lot that Droid RAZR is supposed to be very slim and which is why the RAZR brand. I thought, at best it would be 9mm but how wrong I was.

            Data Speeds

            Droid RAZR’s 4G LTE compatibility is laudable but S2’s not behind — the Sprint version of S2, the Epic Touch 4G has 4G speeds. Though, the international S2 has to make do with 21mbps HSPA+ speeds, which in itself aren’t bad at all, and are in fact much higher than what iPhone 4S gets you, at 14.4mbps. Yes, Droid RAZR wins!

            Other Features

            Well, Droid RAZR got more powerful 1780 mAh battery than S2’s 1650 mAh and got more storage space, at 32Gb, than 16GB. RAM is equal at 1GB in both devices.

            So that’s it. If you preferred a comparison chart or sth, we’ll get you that another time — after all, Galaxy Nexus is on the horizon now, and we’ll be back with comparison stuff pretty soon.

            Root Galaxy Note 4 Sm

            It has only been a few weeks since the release of Galaxy Note 4 and root for the device is already available. The Galaxy Note 4 SM-N910F is the LTE-A variant of the device based on qualcomm’s APQ8084 chipset. The device is bootloader unlocked by default and that’s why achieving root on the device didn’t took long for Chainfire.

            Chainfire’s CF Auto Root works for most Samsung devices, and the Galaxy Note 4 root has also been achieved using the same root package. CF Auto Root uses Chainfire’s own SuperSU app to manage Superuser permissions.

            If you’re new to rooting and stuff, then know that rooting your Galaxy Note 4 with CF Auto Root will void your device’s warranty and will also trip the Knox flag. If you don’t want the knox counter to represent that you’ve rooted your phone, then look for a pre-rooted firmware for your Galaxy Note 4. Most pre-rooted firmwares doesn’t trips Knox and keep its status at 0x0, which saves you from letting Samsung service center reps know that you’ve rooted or tinkered with the device’s system.

            Enough talk? Okay, let’s get to the action and root Galaxy Note 4 SM-N910F.

            Contents show

            WARNING!

            GUIDE: ROOT GALAXY NOTE 4 SM-N910F

            STEP 0: CHECK DEVICE MODEL NO.

            STEP 1: BACKUP YOUR DEVICE

            STEP 2: INSTALL LATEST DRIVER

            STEP 3: INSTALLATION INSTRUCTIONS

            ROOT PACKAGE INFO

            Name

            Warranty Void Warranty.

            Stability Stable Without Any Issues

            Root Manager App SuperSU. It manages root permissions for apps on the device.

            Credits Chainfire.

              WARNING!

            Warranty may be void of your device if you follow the procedures given on this page.

            You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

              GUIDE: ROOT GALAXY NOTE 4 SM-N910F

            Before you begin with guide instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

              STEP 0: CHECK DEVICE MODEL NO.

            To make sure your device is eligible with this, you must first confirm its model no. in ‘About device’ option under Settings. Another way to confirm model no. is by looking for it on the packaging box of your device. It must be SM-N910F!

            This guide is specifically for the Samsung Galaxy Note 4 with model no. SM-N910F. Do not use the procedures discussed here on any other device of Samsung or any other company. You have been warned!

              STEP 1: BACKUP YOUR DEVICE

            Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

            For help on Backup and Restore, check out our exclusive page on that linked right below.

            ► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

              STEP 2: INSTALL LATEST DRIVER

            You must have proper and working driver installed on your windows computer to be able to successfully root your Galaxy Note 4. If you are not sure, check the link below.

            ► SAMSUNG GALAXY NOTE 4 DRIVERS INSTALLATION GUIDE

               STEP 3: INSTALLATION INSTRUCTIONS   DOWNLOADS

            Download the CF Auto Root file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

              CF AUTO ROOT FILE   STEP-BY-STEP GUIDE

            Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after rooting, which might delete internal sd card too, your files will remain safe on PC.

            Extract/Unzip the CF-Auto-Root file, CF-Auto-Root-trlte-trltexx-smn910f.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:

            CF-Auto-Root-trlte-trltexx-smn910f.tar.md5

            Odin3-v3.07.exe

            Odin3.ini

            tmax.dll

            zlib.dll

            Disconnect the Galaxy Note 4 from PC if it is connected.

            Boot your Galaxy Note 4 into Download Mode:

            Power off your phone first and wait for 6-7 seconds after display is off.

            Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

            If you don’t get the Added! message, here are some troubleshooting tips:

            Make sure you have installed driver for Galaxy Note 4 as said above.

            If you have already installed driver, then uninstall them and reinstall back.

            Connect using a different USB port on your PC.

            Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

            Reboot phone and PC and then try again.

            Load the recovery file (extracted in Step 1) into Odin as instructed below:

            Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

            Double check the above two steps.

            If you see FAIL message instead of the RESET or PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

            Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Note 4 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

            NOTE: It may happen that your phone doesn’t automatically boot into recovery and root your phone. In that case follow the following above procedure except that in Step 7, Auto Reboot option is un-checked and then the instructions below:

            Pull out the battery and re-insert it.

            Boot your Galaxy Note 4 into Recovery Mode: Press and hold these 3 buttons together: Volume Up + Power + Home.

            Now, this will start the rooting process and will reboot the phone automatically when the process is done.

            Feedback Us!

            It was easy to root Galaxy Note 4 SM-N910F using CF-Auto-Root, right? Let us know how you plan to use root privileges on your Galaxy Note 4 now.

            Suggestions are most welcomed!

            How To Root Galaxy S6 On Android 5.1.1 (All Variants)

            Been impatiently waiting for a working root method for your Galaxy S6 running on Android 5.1.1? Well, there’s some good news. Root has finally been achieved on Android 5.1.1 builds for all variants of the Galaxy S6.

            This is a combined effort from XDA users g.lewarne, mikeyinid (for making a custom kernel) and bigbiff (for 5.1.1 compatible TWRP recovery). The 5.1.1 based custom kernel from g.lewarne includes auto-root, so just flashing it via TWRP does the job.

            However, this may not work on the Galaxy S6 edge variants. The TWRP recovery needs to be modified for the edge variant, and until TWRP works, you can’t flash the custom kernel’s .zip file to your S6 edge. Don’t be sad though, this should be sorted out soon and either an edge compatible TWRP recovery or Odin flashable kernel should be available soon for rooting Galaxy S6 edge on Android 5.1.1.

            For the Galaxy S6, g.lewarne’s custom kernel with auto-root is universal, so it’ll work on all variants of Galaxy S6 — G920F, G920I, G920T (T-Mobile), G920S, G920K, G920L and G920W8.

            Grab the Android 5.1.1 compatible TWRP recovery and g.lewarne custom kernel with auto-root from the download links below and then follow the instructions to root your Galaxy S6.

            Method 1: Root Galaxy S6 on Android 5.1.1 via ODIN

            [icon name=”download” class=”” unprefixed_class=””] Download Odin 3.10.6

            [icon name=”download” class=”” unprefixed_class=””] Download UniKernel v6-0001 for Odin (.tar)

            Open Odin 3.10.6 on your PC.

            Boot your Galaxy S6 into Download mode:

            Switch off your tablet.

            Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.

            Press Volume Up on the warning screen to accept it and boot into Download mode.

            Once your S6 is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the phone and show an “Added!!” message.

            └ Note: DON’T play with any other options on the screen. You’re only required to connect your Galaxy S6 and select the KERNEL file in PA tab.

            Your phone will automatically reboot when Odin is done flashing. You should now have root access, look for the SuperSU app in your app drawer. Also, download and install this root checker app from Play Store to verify root access.

            Method 2: Root Galaxy S6 on Android 5.1.1 via TWRP Recovery

            [icon name=”download” class=”” unprefixed_class=””] Download Android 5.1.1 TWRP Recovery

            [icon name=”download” class=”” unprefixed_class=””] Download Odin 3.10.6

            [icon name=”download” class=”” unprefixed_class=””] Download UniKernel v6-0001 for TWRP (.zip)

            We’ll be flashing the 5.1.1 TWRP recovery first via Odin and then flash the custom kernel with auto-root via TWRP recovery.

            NOTE: This guide is only for Galaxy S6 running on Android 5.1.1. Do NOT try this on Android 5.0.2 builds.

            Step 1: Install Android 5.1.1 TWRP Recovery

            Open Odin 3.10.6 on your PC.

            Boot your Galaxy S6 into Download mode:

            Switch off your tablet.

            Press and hold “Home + Power + Volume down” buttons for a few seconds until you see a warning screen.

            Press Volume Up on the warning screen to accept it and boot into Download mode.

            Once your S6 is in download mode, connect it to the PC with a USB cable. The Odin window on PC should detect the phone and show an “Added!!” message.

            └ Note: DON’T play with any other options on the screen. You’re only required to connect your Galaxy S6 and select the FIRMWARE file in PDA tab.

            Your phone will automatically reboot when Odin is done flashing. TWRP recovery should now be installed.

            Step 2: Flash Custom Kernel with auto-root via TWRP Recovery

            Download and transfer g.lewarne’s custom kernel with auto-root to your Galaxy S6.

            Boot your Galaxy S6 into TWRP recovery:

            Power off your Galaxy S6.

            Press and hold “Volume UP + Power + Home” buttons together and as soon as you see the Galaxy S6 logo on screen, release all the three buttons. This will boot you into TWRP recovery.

            Tap Install on the TWRP recovery main menu and select the custom kernel zip file that we transferred to your phone in Step 1.

            Flash the custom kernel and then simply reboot your S6. You DON’T need to wipe anything.

            That’s all. Upon boot, look for the SuperSU app in your app drawer. Also, download and install this root checker app from Play Store to verify root access.

            Root Samsung Galaxy Mega 6.3 Gt

              WARNING!

            Warranty may be void of your device if you follow the procedures given on this page.

            You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.

              GUIDE: ROOT SAMSUNG GALAXY MEGA 6.3

            Before you begin with the instructions below, make sure your android device is adequately charged — at least 50% battery of the device.

              STEP 0: CHECK DEVICE MODEL NO.

            Please know that this page is meant for Samsung Galaxy Mega 6.3 with model no. GT-I9200 only. Do not use the procedures discussed here on other device of Samsung or any other company. You have been warned!

              STEP 1: BACKUP YOUR DEVICE

            Back up important data and stuff before you start playing around here as there are chances you might lose your apps and app-data (app settings, game progress, etc.), and in rare case, files on the internal memory, too.

            For help on Backup and Restore, check out our exclusive page on that linked right below.

            ► ANDROID BACK UP AND RESTORE GUIDE: APPS AND TIPS

              STEP 2: INSTALL LATEST DRIVER

            You must have proper and working driver installed on your windows computer to be able to successfully root your Samsung Galaxy Mega 6.3.

            In case you’re not sure, follow the link below for a definitive guide for installing driver for your Samsung device on your computer.

            ► SAMSUNG DEVICES DRIVERS INSTALLATION GUIDE

               STEP 3: INSTALLATION INSTRUCTIONS

              DOWNLOADS

            Download the Pre-Rooted Kernel file given below and transfer it to a separate folder on your computer (just to keep things tidy, that is).

              PRE ROOTED KERNEL   ODIN FILE   STEP-BY-STEP GUIDE

            Important Note: Backup important files stored on internal SD card of your device, so that in case a situation arises requiring you to do a factory reset after flashing with Odin, which might delete internal sd card too, your files will remain safe on PC.

            Extract/Unzip the Odin file, Odin_v3.09.zip on your computer (using 7-zip free software, preferably). You’ll get the following files:

            Odin3 v3.09.exe

            Odin3.ini

            Download the kernel file, vcoreroot-v2.tar and place it in the same folder where you extracted the Odin files. You’ll have the following files in the folder now:

            Odin3 v3.09.exe

            Odin3.ini

            vcoreroot-v2.tar

            Disconnect the Galaxy Mega 6.3 from PC if it is connected.

            Boot your Samsung Galaxy Mega 6.3 into Download Mode:

            Power off your phone first and wait for 6-7 seconds after display is off.

            Press and hold these 3 buttons together until you see Warning! screen: Volume Down + Power + Home.

            If you don’t get the Added! message, here are some troubleshooting tips:

            Make sure you have installed driver for Galaxy Mega 6.3 as said above.

            If you have already installed driver, then uninstall them and re-install back.

            Connect using a different USB port on your PC.

            Try a different USB cable. The original cable that came with your phone should work best, if not, try any other cable that’s new and of good quality.

            Reboot phone and PC and then try again.

            Load the firmware file (extracted in Step 1) into Odin as instructed below:

            Now in the Option section of Odin, make sure that Re-Partition box is unchecked. (Auto Reboot and F. Reset Time boxes remain checked, while all other boxes remain unchecked.)

            Double check the above two steps. (Step 7 and Step 8)

            If you see FAIL message instead of the PASS in Odin’s top left box, that’s a problem. Try this now: disconnect your Galaxy Mega 6.3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

            Also, If device is Stuck at setup connection or on any other process, then too, try this: disconnect your Galaxy Mega 6.3 from PC, close Odin, remove phone’s battery and put it back inside in 3-4 seconds, open Odin and then repeat from Step 3 of this guide again.

            FEEDBACK US!

            It was easy to root your Galaxy Mega 6.3 with Odin, right?  Let us know how you plan to use root privileges on your Galaxy Mega 6.3.

            Your suggestions and queries, if any, are most welcomed!

            Samsung Galaxy Tab S2 Vs Galaxy Tab S3: What’s The Difference?

            Our Verdict

            The Samsung Galaxy Tab S3 was released with much anticipation. Android fans everywhere were hoping it would be a sleeker and much improved device from the Galaxy Tab S2, which is now getting long in the tooth. Samsung has obviously made steps to improve upon the Galaxy Tab S2, such as the introduction of the AKG tuned quad stereo speakers, a superior camera both front and back, longer battery life and processor and RAM improvements. However, depending on your budget that may not be enough to justify the £200 price hike. We will know more when we have finished our complete testing of the Tab S3.

             Tab S2Tab S3Display9.7in SuperAMOLED9.7in SuperAMOLEDProcessorSnapdragon 652Snapdragon 820RAM3GB4GBStorage32GB/64GB32GB with microSD support up to 256GBCameras8Mp rear, 2.1Mp front13Mp rear, 5Mp frontOperating systemAndroid 5.0 LollipopAndroid 7.0 NougatConnectivityMicro-USB 2.0 USB-C 3.1Battery5,870mAh6,000mAh, Adaptive Fast ChargingDimensions237.3x169x5.6mm237.3x169x6mmWeight389g429g

            Android tablet fans were hotly anticipating the release of the new Samsung Galaxy Tab S3 as it was announced in Barcelona last week at MWC. But how does it compare to last year’s release of the Samsung Galaxy Tab S2? We consider the specifications of the Tab S2 and Tab S3 to find out what’s new for the Tab S family. Also see: Samsung Galaxy Tab S2 review and Galaxy Tab S3 review

            Tab S2 vs Tab S3: UK Price and availability

            You can buy the 9.7in Samsung Galaxy Tab S2 in black, gold or white today for £399.95 (via John Lewis), while the Samsung Galaxy Tab S3 in black or silver will be available on 7 April at £599.99 (also via John Lewis – you can pre-order from 5 April). That’s a hefty increase over the Tab S2.

            Galaxy Tab S2 vs Tab S3: Design and Display

            On the face of it, not much has changed aesthetically speaking. The Tab S3, in common with the Tab S2, has smooth, rounded edges that make it feel comfortable in the hand. The Tab S3 comes with the six-pin keyboard connectivity along the side, and also has quad stereo speakers. These have been tuned by speaker and headphone specialist AKG, and will thus provide improved sound quality. However, if you rarely play sound out of the tablet itself and use headphones or external speakers, this addition will mean little to you.

            The Tab S3 also has faster USB 3.1 than the USB 2.0 connection found on the Tab S2, bringing improved transfer speeds and accessibility for a mouse or external keyboard if you haven’t yet got yourself a tablet keyboard set up. This is interesting to note as it is something the 9.7in iPad Pro lacks. Also see: Best tablets 2023

            Image: Galaxy Tab S3

            Although both the S3 and the S2 have 9.7in SuperAMOLED displays, the Tab S3 is every so slightly larger than the Tab S2 by 0.4mm. It’s also a little heavier.

            The Tab S3 comes with the improved and redefined S Pen in the box, which allows the user to quickly navigate between apps as well as provide assistance to any user wishing to take notes or sketch designs. However, the device does not have a holder for the pen, so losing it could be a problem.

            Both tablets come with a fingerprint scanner integrated into the home button.

            The Galaxy Tab S3 does not have NFC so, like its predecessor, you won’t be able to use Android Pay or share files, pictures and contacts by hovering the tablet over another device. Also see: Best Android tablets 2023

            Tab S2 vs Tab S3: Processor Image: Galaxy Tab S2 Tab S2 vs Tab S3: Battery

            Although the Galaxy Tab S3 has a larger battery than its predecessor, up from 5,870mAh to 6,000mAh, many expected a larger battery still – the iPad Pro, for example, has a 10,307mAh battery.

            However, Samsung claims the Tab S3 will last for 12 hours compared to the iPad’s 10 hours. Again, this is something we will need to test properly when we get the Tab S3 into our lab. The Tab S3 also offers fast charging, which is useful when you need to be out on the road.

            Tab S2 vs Tab S3: Cameras

            As tablet cameras are predominantly used for video calls, the Galaxy Tab S3 has an improved 5Mp front-facing camera, compared to the Galaxy Tab S2’s 2.1Mp camera. The rear-facing camera has also been improved on the Galaxy Tab S3 with a bump up from 8- to 13Mp, which is comparable to the new Samsung Galaxy Book also announced at MWC 2023.

            Image: Galaxy Tab S3 Tab S2 vs Tab S3: Storage

            Strangely, while you can get a Galaxy Tab S2 with 64GB of internal storage, the Tab S3 is available only with 32GB. Samsung’s decision on this is a bit of a head-scratcher: with large files such as movies and shows, a plethora of games to choose from, not to mention all the photos and videos which can be captured on the device, you would expect at least the option of a larger internal capacity.

            Having said that, the Tab S3 does offer support of microSD cards of up to 256GB in size. Although we’d like to see more storage as standard, the newer tablet actually has the potential to have more storage than its predecessor.

            Image: Galaxy Tab S2

            Read next: Best new tablets coming in 2023

            Specs Samsung Galaxy Tab S3: Specs

            Android 7.0 Nougat

            9.7in Super AMOLED screen with HDR

            2048×1536

            Qualcomm Snapdragon 820

            4GB RAM

            32GB storage

            Micro-SD card slot

            Bluetooth 4.2

            GPS

            11ac Wi-Fi with 2×2 MIMO

            LTE Cat 6

            USB-C

            6000mAh battery

            Fast Charging

            13Mp rear camera

            5Mp front camera

            Fingerprint scanner

            Four speakers

            237x169x6mm

            429g(Wi-Fi)/434g(LTE)

            Update the detailed information about Root Xxlp2 On Your Galaxy S2 I9100 Using Cf on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!