Trending March 2024 # Switch Dock Not Working? Try These Fixes # Suggested April 2024 # Top 10 Popular

You are reading the article Switch Dock Not Working? Try These Fixes updated in March 2024 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Switch Dock Not Working? Try These Fixes

When the Dock does not work, both the display and USB port fails to respond, and the green LED on the corner does not light up. Although it may seem like the faulty power cable is to blame, we cannot rule out other possible causes like HDMI issues, the device being low on power or the device being in an error state.

There could be a slew of fixes. Checking the green LED is the easiest method. This indicates whether or not the device is receiving power. If the device receives power, the problem is most likely with its firmware or ports. And you might want to start by repairing those components. However, depending on what caused the issue, there may be more than one solution.

When a Nintendo Switch Dock stops working, there are two things that could have happened. Whether the device is not getting power or there could be other technical issues.

The device usually faces power issues due to a faulty power adapter or the port itself. On the other hand, technical issues could be anything from a defective display cable to a damaged dock.

Faulty HDMI cable

Nintendo Switch Outdated

Damaged Power Cable

Wrong display source on your screen

Damaged Switch Dock

Now that you know why Switch Dock stops working, let us understand how you can fix it.

First, restart both the Dock and the Switch and connect the two. Now check the Switch dock for a green LED. 

If the LED is on, the issue is likely with the ports or configurations. If the LED does not turn on, remove and reconnect all the cables that go into your Dock. 

If that does not work, you might want to power cycle the Switch.

Any parts inside a hardware component need to interact with each other to function. If a system or a device enters a deadlock situation where components cannot interact with each other, the entire device may not work.

This is where power cycling a device comes in. Power cycling a device frees it from all remaining charges which removes any configuration stored. This in turn returns the device to its base state or a stable state, fixing any errors or bugs causing the malfunction.

To power cycle the Switch,

Remove the Switch from the Dock.

Now plug everything back, connect the Switch to the Dock, and turn it on.

If power cycling does not work, you may need to insert the cables in the correct order before turning on the Switch.

Sometimes, the Switch dock only works when you insert cables in the correct order. Users in many Q&A forums have reported that connecting the power to the Dock solved the issue. Power issues may stop the ports from being detected when you connect them before the power supply. 

It could also simply be a bug in Nintendo Switch. Nevertheless, here is how you need to connect the cables in Nintendo Switch.

Now connect one end of the HDMI cable to the Dock.

Connect another end of HDMI to the display device.

A bug in the device could be the reason Nintendo Switch is having issues connecting to the Dock. In that case, we recommend that you update your Switch right away. Updating Switch not only fixes any bugs and errors with the device but also brings new features and security upgrades.

To update Switch,

Turn on the Switch.

Scroll down to System.

Select Update and then press OK.

Once the process is complete, Switch will automatically restart.

Now connect Switch to the Dock and the Dock to your display device to see if the update fixed the problem.

When Switch is connected to a display device, Match TV Power State allows both your display device and Switch to turn on and off together. Meaning that when you turn on the display device, Switch automatically turns on and turns off when you turn off your primary display screen. 

Enabling this feature can confuse Switch when turning off the display device and trying to turn on Switch. If that’s the case for you, we recommend that you disable Match TV Power State from TV Output settings.

Turn on the Switch.

Select the gear icon to open System Settings.

Scroll down to TV Settings.

If the green light on the Dock turns on, but you still do not get any display, the problem could be with the HDMI cable. HDMI cables do transfer video data efficiently. However, they are known to be faulty as well. Besides this, these cables do not age well with time, as frequent twists and turns are known to damage them.

Furthermore, you may also have issues getting any display on your monitor if the HDMI port version on the Dock does not match the HDMI cable’s version. Therefore, make sure that you are using the correct HDMI type.

Try using a different HDMI cable, one that matches the HDMI version and is not faulty, to connect the Dock to the display source to see if it fixes the issue.

Another reason the Switch dock does not seem to be working is if the display device is taking a different source as input. You will find several input ports on your display device. Therefore, you can select the input source from which the monitor takes input.

You need to make sure that the currently selected source on your display device is the one to which Switch is connected.

If you are on a TV, navigate through display settings and set the correct Source. On a monitor, however, you will need to navigate settings using the side buttons. 

Note: Depending on the monitor or TV, you will need to navigate through the display configuration to find the correct settings. 

Dust and debris on your display ports could be obstructing data transfer between the Switch and the display device. If this happens, the output screen will not display anything, making it seem like the Switch Dock is faulty.

Try cleaning both the ports on the Dock and the display device using a can of compressed air. Make sure that both the ports and the cables are clean before inserting them.

When you connect the Dock to a screen, the green light on the Dock will turn on. If this light fails to turn on, there is a high chance that it is not getting power or the battery draining fast and taking long time to charge. In that case, try using a different cable to power Switch Dock.

If the second power cable still does not work, it could be that the Dock itself is at fault.

If none of the solutions works, you can try using a separate dock to determine where the problem lies. If you still do not get anything on the screen after connecting the Switch to a different Dock, there is a high chance that the connector that joins the Switch to the Dock is faulty.

However, if the new Dock works, the issue is likely with the older Nintendo Switch dock, and you need to replace or repair it. You can try taking the Switch dock to a local electronic repair shop to get an idea about what caused the malfunction and ways you can fix it.

You're reading Switch Dock Not Working? Try These Fixes

Samsung Dex Not Working? Try These Fixes

Samsung DeX is an amazing feature that offers a desktop-like experience via a bigger display on a Samsung Galaxy phone. If you use it regularly, but it suddenly stops working, you may be wondering what happened. Thankfully, you can easily make it work again by following the fixes provided below. Let’s check different ways to bring the Samsung DeX functionality back on track.

1. Restart All Connected Devices

The first thing you must do if Samsung DeX isn’t working is restart all of the connected devices, including:

Samsung Galaxy phone

Wi-Fi modem, if you are connecting wirelessly

PC, if you are using DeX on a PC

TV, if you are connecting DeX on a TV

2. Check Compatibility

For DeX to work properly, you must check whether the devices are compatible. Samsung DeX doesn’t work on all Samsung phones. It’s available only on the Samsung S8 series and up, except for the Galaxy Flip series.

Furthermore, you must have a TV that supports Miracast technology to use DeX wirelessly. Similarly, Windows PCs with an ARM processor may not be compatible with DeX. Touchscreen displays and Samsung DeX for Mac are also not supported. Check the list of the DeX-compatible devices and displays on Samsung’s official webpage.

Tip: check out other ways to run Android apps on PC.

3. Check Connected Hardware

Hardware plays a significant role in DeX working properly. You must ensure that everything is working smoothly. For instance, if you are using a DeX station, make sure your phone is seated properly. If necessary, remove the phone and replace it.

If DeX isn’t working on your TV or monitor, try connecting it to a different device. There are chances that the monitor may not be compatible with DeX.

4. Check USB Cable

For DeX connections via cable, ensure that the cable is securely plugged in. Remove and reconnect it. Also, try using the original cable that came with your phone and connect via a different port on your PC or monitor to get DeX working again.

5. Connect to the Same Wi-Fi Network

If you are trying to use DeX wirelessly, ensure that your phone and the device that you are trying to connect (TV or PC) are on the same Wi-Fi network.

Tip: is your Wi-Fi connection slow around the house? These steps can help remedy the situation.

6. Switch to a Different Wi-Fi Band

Some displays are not compatible with the 5GHz Wi-Fi band, so it would help if you switched to the 2.5 GHz network on both devices in Wi-Fi settings.

7. Disable the Power-Saving Mode

When using DeX mode, you must turn off the power-saving mode on your phone.

Turn off the toggle next to “Power saving.”

Also, try to charge your phone before using DeX or keep it plugged in when connecting DeX.

If you are using a USB to HDMI hub, make sure to connect it to a power supply; otherwise, you will only be able to screen mirror and will not have full use of the capabilities of DeX.

8. Turn Off VPN

DeX may not work properly if your phone or TV/PC is connected to a VPN. You must turn off your VPN, then try using DeX.

9. Change USB Mode on the Phone

Whenever you connect your phone to your PC using a USB cable, you will see a USB options notification in the notification panel. Tap on this notification, then try resetting the connection by switching to “Charging phone only,” then back to “Transfer files.” This should fix the issue of DeX not working.

10. Install, Open, or Restart the DeX App on PC

Unlike a TV, where you can use DeX without installing anything, you need to first download the DeX software to your Windows PC.

Next, make sure that the DeX app is open on your Windows PC when you are trying to use it. There’s a chance that your PC has closed the DeX app. If you don’t see the DeX app icon on the taskbar, open it.

However, if the DeX app is already running, restart the app by closing it and reopening it.

Tip: want to use Samsung DeX at a pro level? Learn how to get started.

11. Run DeX App as Admin on Your PC 12. Start DeX Mode on Your Phone

Typically, your Samsung phone will automatically switch to DeX mode when connected via a USB-C to HDMI adapter. If that doesn’t happen, enable DeX as shown below.

Press the “Start DeX” button. Also, enable the toggle next to “Auto start when HDMI is connected.” This will automatically start DeX mode when you connect an HDMI cable.

13. Select Right Connection Mode

On OneUI 5 and above, both your PC and TV/monitor will show up in the list of available devices under the “Connect wirelessly” section.

On the earlier versions of OneUI, Samsung offers two separate modes for connecting DeX: “DeX on TV” (or monitor) and “DeX on PC.” You must select the proper mode when connecting DeX.

14. Select Samsung DeX from Notification Panel

After connecting DeX, if your TV or monitor starts mirroring your phone instead of switching to DeX, you must tap on the Samsung DeX notification in the notification panel followed by Samsung DeX. That’s it. Samsung DeX mode will instantly launch on the connected device.

Pro Tip: on some phones, you may need to search for HDMI mode settings and switch to DeX from mirroring.

If you are able to connect your phone to your PC wirelessly, but the USB mode doesn’t work, you must update the USB drivers on your Windows PC. The issue with Samsung DeX not working could be happening due to outdated drivers.

Connect your phone and PC via the USB cable.

16. Clear Cache and Data of DeX App on Your Phone

As with everything, you must try the golden trick of clearing the cache and data of all the DeX-related apps on your Samsung Galaxy phone to fix DeX not working.

Open Settings on your Samsung Galaxy phone.

Go to “Apps.”

Tap on the Sort and Filter icon and enable the toggle next to “Show system apps.” Press the “OK” button.

Type “DeX” in the search at the top, then select each item that shows, one by one.

Go to “Storage” and press “Clear cache,” followed by the “Clear data” button. Repeat this for other DeX-related apps that you find in step #4.

Restart your phone.

Good to know: have a Samsung TV? Learn how to pair it with Alexa.

If Samsung DeX fails to work on your PC, you must update the DeX PC app. You may be using an old version of the app, and it may have a bug or not be compatible with your phone. To update the Samsung DeX app on your Windows PC, follow these steps:

Launch the DeX app on your computer.

18. Reinstall DeX App on Your PC

If updating the DeX app didn’t help it work on your PC, then you must reinstall the app. Uninstall the DeX app from your computer, restart your computer, then install the app again.

19. Start Samsung Services on Your PC

If you are connecting DeX to your PC using a cable, ensure that Samsung Mobile connectivity services have been started. Typically, the services are set to start automatically, but this may have changed.

In your Windows search, type “Services” and select the best match underneath.

Reconnect the USB cable.

20. Add Wireless Display Feature on Windows 11

If Samsung DeX isn’t working on Windows 11, you may need to manually add the Miracast (wireless display) feature on some PCs running Windows 11.

Search for a “Wireless Display.” Select it and hit the “Next” button. Follow the on-screen instructions to install it.

After installing it, restart your computer, then try using DeX on PC.

21. Download Samsung DeX Patch

If your Samsung Galaxy phone is issued and administrated by a business, and DeX mode doesn’t start, you will need to download the DeX patch. But first, check whether a patch is required.

Disconnect your phone from the monitor.

Scroll down and look for “Knox Customization.” If it appears, you will need to download the DeX patch. Open the Knox website in a browser on your Samsung phone and follow the on-screen instructions to download the patch.

Do you have a company- or school-owned PC? If yes, and the above solutions didn’t help, you must contact the admin of your PC, as some public computers have security software installed that prevents DeX from running properly.

23. Reset Settings on Your Samsung Phone

Lastly, if Dex isn’t working, you must reset the settings on your Samsung phone. Doing so will restore all the settings to their original values, fixing the issues you may be facing while using DeX. Don’t worry, as this will not delete any data or files from your phone.

Tip: customization is one of the strong points of Samsung Galaxy phones. We show you how to personalize your home screen according to your preferences.

Frequently Asked Questions How can I fix DeX not working on my Mac?

As mentioned earlier, Samsung DeX is no longer supported on Mac. But if you have the older version installed, and it’s not working, you need to allow certain permissions.

How can I reset Samsung DeX?

There is no option to reset Samsung DeX. On a PC, reinstall the app, and on a phone, clear the data of the DeX apps.

All screenshots and images by Mehvish Mushtaq.

Mehvish Mushtaq

Mehvish is a tech lover from Kashmir. With a degree in computer engineering, she’s always been happy to help anyone who finds technology challenging. She’s been writing about technology for over six years, and her favorite topics include how-to guides, explainers, tips and tricks for Android, iOS/iPadOS, Windows, social media, and web apps.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Windows Boot Manager Not Working? Try These Fixes

Windows Boot Manager is the built-in Microsoft application that provides the boot environment for your system. On a multi-OS system, it helps the user decide which OS to boot into.

Users may encounter issues such as their computer booting into an OS without loading the Boot Manager or not displaying all available OS. It usually happens if you have a non-Windows OS or there are some issues with the boot files.

In this article, we have mentioned how you can troubleshoot such issues in detail.

First, restart your PC and check if Windows Boot Manager still doesn’t work or shows other issues. In such cases, apply the possible solutions we have provided below.

You can’t use Windows Boot Manager without enabling it. So, first, follow the steps below to make sure you have enabled the Boot Manager and check its settings:

You can also use the Command-line Interface to enable Boot Manager and change the timeout interval. To do so,

Open Run, type cmd, and press Ctrl + Shift + Enter to open the Elevated Command Prompt.

Enter the following commands:

bcdedit /set {bootmgr} displaybootmenu yes

bcdedit /set {bootmgr} timeout 30

Windows Boot Manager does not display other Operating Systems, such as Linux, by default. You have to configure such a setting manually. To so so,

Open the Elevated Command Prompt.

Type bcdedit /set "{bootmgr}" path EFIubuntugrubx64.efi and press Enter.

You can also use third-party BCD tools to enable this setting.

However, most users prefer using the GRUB Bootloader, which displays all OS without having to configure any settings. You can also use this Bootloader as an alternative.

Fast startup shows many issues with a multi-OS system. While this feature decreases the time it takes to boot your system, it may bypass the Boot Manager and directly load your default OS. It mainly happens when dual-booting Linux and Windows.

Here’s how you can disable fast startup from Windows OS: 

There are also other methods of disabling this feature, and some may overwrite the method we specified. You can find all the possible methods in our article, How to Enable or Disable Fast Startup on Windows. Check it out if there are any issues or if you simply want to learn more about the process.

You may experience the Boot Manager is Missing error if you try to boot from a Windows installation device and there are some issues with the USB connection. In such a scenario, first, check the device on another computer to account for issues with the boot files. You should also check by changing any replaceable cable if necessary.

Then, reinsert the media to the earlier PC while ensuring no loose connection. There may also be issues with your USB port. So, troubleshoot them using the methods from our article, How to Fix USB Ports Not Working.

You can also try reconnecting your hard drive’s SATA or IDE cables if your system’s Boot Manager or boot device is inaccessible.

Windows Boot Manager won’t work properly if there are any errors on the boot files. You can perform Startup Repair to repair most boot or startup errors. To run this feature:

Rebuilding your Boot Configuration Data is the most common solution to most Boot or Startup errors. If Startup Repair fails to resolve your issue, you must rebuild your BCD and try again. Here are the necessary steps for the process:

Restart your PC and check if your Boot Manager starts working. If not, recreate the Boot Configuration Data.

Open the Recovery disk WinRE’s Command Prompt and enter one of these commands below to change to the Boot directory:

cd /d R:EFIMicrosoftBoot

cd /d R:ESDWindowsEFIMicrosoftBoot

cd /d R:Boot

If you enter the incorrect path for the Boot directory, you’ll receive the “The system cannot find the path specified” error message. So, use the command where you don’t encounter this error. 

After that, enter these commands to recreate BCD:

bcdboot C:Windows /s R: /f UEFI

ren BCD chúng tôi C:Windows /s x: /f ALL

exit

We also recommend running the DISM, and SFC commands after rebuilding your BCD to account for other issues with your system files. The commands are:

DISM /Online /Cleanup-Image /RestoreHealth chúng tôi /LimitAccess (Replace I: with your Recovery drive letter. Also, for some systems, the source file is install.esd)

SFC /Scannow

If you have a dual boot system with Linux and Windows, you may have set the default bootloader to GRUB instead of Windows Boot Manager. If there are any issues with this Bootloader, use the Boot-Repair tool to repair GRUB.

Use the command BCDEdit /? Default to get more information and BCDEdit /? ID to learn all possible IDs.

This command will also reset the default boot option with other Bootloaders, like GRUB.

If none of the previous methods helped solve the issue, your need to Restore, Reset or Reinstall Windows.

If you have a recent restore point, you can restore your system using the steps below:

You can also delete the old boot partition and clean install Windows using the installation media.

If Windows Boot Manager still shows issues, it indicates HDD or SSD faults. In such a scenario, take your computer to a hardware expert for repair or replacement.

Is Dying Light 2 Survivor Sense Not Working? Try These Fixes

Is Dying Light 2 Survivor Sense not working? Try these fixes

423

Share

X

Some worldwide gamers reported that Dying Light 2 Survivor Sense is not working as expected and, unfortunately, engineers didn’t deliver some specific fixes.

If you face this annoying issue, there are some easy workarounds you can use to fix it, and we’re going to show them all.

Uninstalling and reinstalling the game is good, but should be the last solution you try.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Even if this game just has been released, it is no longer a surprise that it is capable of providing some of the most exciting experiences and it can be played on the most popular gaming platform, Steam.

However, not everything is milk and honey. In these terms, many worldwide players already claimed that Dying Light 2 Survivor Sense is not working.

Keep in mind that this feature should be activated by simply pressing a button/key and it is an echolocation-like ability that you can use to highlight nearby loot, tracks to follow, and enemies. Noticing that it is not working can be extremely annoying.

Unfortunately, developers didn’t come up with some proper fixes, but until then, you can try our below-listed workarounds, as they proved to be efficient in some particular cases.

What can I do if Dying Light 2 Survivor Sense is not working?

In the first instance, you should try holding down or tapping the survivor sense button a couple of times.

Some gamers claimed that Survivor Sense can not work while up in the air. Thus, you’ll need to be on the ground.

Another solution that seems to work crouching a couple of times or walking around. Then, hitting the Survivor Sense button should solve this problem.

You can also try taking out your weapon or using block and then using Survivor Sense.

In case you notice that Dying Light 2 Survivor Sense is not working on your controller, try to wiggle your analog stick for a while to see if it manages to solve the problem. Plus, you can try using a different device and check if the issue still persists.

As some worldwide players reported, playing Dying Light 2 on full screen rather than borderless window mode might be useful.

Switching items from the weapon wheel or just toggling around it helped disable the Survivor Sense bug in several cases.

Because most of the game-related issues can occur due to some outdated or corrupted graphics drivers, this one might also result because of this situation. In order to always be able to enjoy a smooth and complete experience, make sure you try Outbyte Driver Updater, the best tool that will automatically take care of any of your drivers.

Restarting or uninstalling and reinstalling Dying Light 2 and then starting it up and playing the game is the last workaround you should perform, but it can really help you.

In conclusion, for now, these are the only reliable fixes that seem to help players when Dying Light 2 Survivor Sense is not working.

Until we come up with some dedicated solutions, you should be able to get rid of this problem by following one of the above recommendations.

Also, you should keep in mind that Dying Light 2 manufacturers came up with some incredible patch notes, available through the 1.2 updates.

To discover more about the related fixed issues and amazing improvements, feel free to check our dedicated guide.

Still experiencing troubles? Fix them with this tool:

SPONSORED

Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?

x

Start a conversation

Iphone Home Button Not Working? 8 Fixes To Try

While newer iPhones no longer have a physical Home button, many older models still have this beloved feature. That is, until that button stops behaving as it should.

If you’re otherwise working iPhone suddenly has a problem with its physical Home button, you’ll want to fix iPhone Home Button problems with these troubleshooting tips.

Table of Contents

The iPhone models with a physical Home button include the iPhone 7, iPhone 7 Plus, iPhone 8, iPhone 8 Plus, iPhone SE (2024), and earlier models. These iPhones use a physical Home button for navigation and accessing features such as the Home screen, Siri, and the App Switcher. Later models, such as the iPhone X and newer, do not have a physical Home button and use gestures and facial recognition for navigation and accessing features, much like most modern Android phones.

1. It’s a Software Problem

If the apps or even iOS malfunctions, it may cause the Home button to stop working. To fix this problem, try restarting the iPhone, resetting the software, or restoring the iPhone to its factory settings. After turning the phone off and starting it up again, many software glitches disappear after the Apple Logo appears.

2. Restore Your iPhone Using Finder, or iTunes

One possible way to fix this issue is by restoring your phone from an iCloud or local backup using iTunes on a Windows PC or Finder on a Mac. Also, you can recover your phone firmware using DFU mode if something goes wrong.

3. Your Home Button Needs Recalibration

While this is rarely an issue, your Home Button may need calibration to respond normally. To calibrate the physical Home button on an iPhone, follow these steps:

Open any Apple stock app, such as

Calendar

.

Press the

Power button

until you see the “

Slide to power off” prompt

.

Instead of turning off the phone, hold the

Home button

until the screen flashes, and you’re taken back to the Home screen.

Test if the Home button works.

Once the calibration is complete, you can use the Home button to access the iPhone’s Home screen, Siri, and other features.

4. Your Home Button Is Dirty

If the Home button is dirty or covered in debris, it may not function properly. To fix this problem, clean the Home button with a soft, dry cloth or use compressed air to remove debris. Do not use chemical cleaning agents such as isopropyl alcohol to attempt cleaning.

5. Home Button Misalignment

The gasket between the Home button and iPhone might be torn or worn and need replacement. Unfortunately, this involves a complicated disassembly, so a trained technician with the right tools should only attempt it. It may also be due to a warped mounting bracket or missing or broken screws for the mounting bracket. In all cases here, a technician must inspect the phone on the inside to confirm if this hardware issue is the real problem.

6. Wear and Tear Caused by Age

One of the reasons Apple moved away from a physical Home button in the first place is that moving parts eventually break down through use, causing various Home button issues. The Home button sees far more action than the side button or volume buttons, so it made sense to go virtual.

If the Home button is not functioning due to age or wear, it may need to be repaired or replaced by a qualified technician.

7. Using the Charger Trick

If the Home button on an iPhone is not functioning correctly, pressing the charger cable may temporarily fix the problem. To fix the Home button by pressing on the charger cable, follow these steps:

Connect the iPhone to a charger using a Lightning to USB cable.

Gently press on the back of the plug in area where the charging cable connector meets the iPhone near the bottom of the device.

Press and hold the

Home button

for a few seconds to see if it responds.

If the Home button starts working, continue to hold the charging cable in place and use the Home button as usual.

This method may temporarily fix the Home button by applying pressure to the area where the charging cable connects to the iPhone. This may improve the electrical connection and allow the Home button to function properly. However, this is a temporary solution, and the Home button may stop working again.

8. Your Home Button Is Physically Damaged

If the Home button is damaged, it may not function properly. To fix this problem, the Home button may need to be repaired or replaced by a qualified technician. If none of the fixes you’ve attempted above resolve the issue, this is the last thing you can do.

Is It Worth Replacing the Home Button?

The iPhone will need to be disassembled to replace the Home button by removing and replacing it with a new one. This complex repair should only be performed by a qualified technician, as it involves disassembling the iPhone and handling delicate internal components.

Depending on the exact price you’re quoted and the age of your iPhone, it may make more sense to buy a new iPhone instead. You may even be able to trade your old iPhone for a significant discount on the price of a new phone.

Suppose your iPhone is still under its Applecare or Applecare + warranty. Take it to the Genius Bar since this issue should be covered when the problem isn’t abuse or accidental damage. Your insurance company may be willing to pay for the repair if it results from accidental damage.

If you decide to have the button replaced by a third-party technician rather than the Apple Store, the Touch ID will no longer work. The Touch ID sensor in the button is paired with the mainboard in your phone for security reasons, so replacing the button breaks that pairing. This also means that if you get a third-party screen replacement, Touch ID won’t work if you use the button that comes with the new iPhone screen. Only Apple can offer a replacement with Touch ID functionality left intact. If the button itself was fine and merely had to be aligned or repaired, you’ll keep Touch ID functionality.

How to Access the Virtual Home Button

If the Home button is not working, you can access the virtual Home button by following these steps:

Open the

Settings app

on the

iPhone

.

Select

Accessibility

.

Scroll down and select

Touch

to open the AssistiveTouch settings.

Select

AssistiveTouch

.

Turn on the

Assistive Touch toggle switch

to enable AssistiveTouch.

A small AssistiveTouch button will appear on the screen, which you can use to access the virtual on-screen Home button and other features. It looks like a small circle on-screen in the same position as the pictured “X.”

To access the virtual Home button, select the

Assistive Touch button

, then the

Home

button. This will simulate the physical Home button and take you back to the Home screen.

Select the

Assistive Touch button

, then tap on the “Siri” button. This will activate Siri and allow you to use your voice to give commands and ask questions.

To access the Control Center, select the

Assistive Touch button

, then the

Control Centre button

. This will open the virtual Control Center, which allows you to access settings and controls for the iPhone.

To access the Notification Center, select the

Assistive Touch button

and then the

Notification Center button

. This will open the Notification Center, which shows notifications and alerts from apps and services on the iPhone.

This workaround will let you use your phone until you can repair it.

Has Your Phone Been Repaired Before?

Have you repaired your phone before? It seems that in some cases, small mistakes such as loose or missing screws, an over-tightened anchor screw, or damage to logic board components cause the malfunction.

If your iPhone’s Home button stopped working after a repair shop worked on it to fix something else, consider taking it back and having them repair the issue under the workmanship warranty with the previous repair.

If Your Ssd Is Not Showing Up In Bios, Try These Fixes

There are few things more confusing than buying a brand-new SSD, installing it happily, only to discover that your PC is not recognizing it.

Follow our guide on how to fix an SSD that does not show up in the BIOS to save yourself countless hours and money spent on shipping “not working SSD” back and forth.

Before you read through the troubleshooting steps, be aware of the most common causes that an SSD is not being recognized.

The SATA power and data cords are faulty/not fully connected

The driver for the SSD is not enabled in the BIOS settings

There is a physical problem with the motherboard connector pins

The drive itself is malfunctioning/defective or broken

The SSD drive is not formatted or is not assigned a drive letter

The steps listed below will directly address all of these issues. The order in which you perform the troubleshooting is critical, so please don’t just jump to random steps midway and instead go methodically from the first step to the last one.

The order is meant to narrow down the possible causes, as oftentimes, it’s tough to pinpoint why a hardware part is not showing up.

You can save hours of troubleshooting if you find that the SSD was into the wrong motherboard connector. Maybe the SATA cable was faulty or did not make complete contact.

This step will help to physically examine the connector cables from the SSD to the motherboard and power supply. They are usually around the edges of the motherboard, either on the right side or the bottom side. 

The first step is to check if your motherboard has the latest driver installed. If the motherboard driver is outdated, it could have issues detecting some newer models of SSD’s.

If the SSD is not showing up in BIOS, you can troubleshoot it in the following way:

Whenever you install new hardware parts, the computer automatically detects and configures them. 

Formatting was often a quick fix when I was trying to recover DATA from older hard drives in the past. From personal experience, I resolved most of my issues after correctly formatting the hard drive.

To conduct this procedure, please follow these steps:

After formatting is complete, please restart your computer and check if the SSD is correctly recognized or working.

I successfully resolved about 90% of the cases from my past dealings with difficult hard drives via formatting them.

Do these small steps in order so we can narrow down the potential cause of your SSD issues.

Test the SSD with another set of SATA connectors and power cables to eliminate the possibility of faulty wires. If you don’t have a spare, swap the SATA cables from your main drive instead.

Remove the SSD and plug it into another system if possible.

If the SSD is not detected on two separate systems/ builds, it’s most likely damaged or dead on arrival.

All motherboards have a different interface configuration and the way you reach certain settings can vary. This is just the universal way of describing how to enable any disabled hard drives.

When the “Hardware and Devices troubleshooter” is run, the System will automatically configure and fix any current SSD issues. Press “Next” and wait until the program has entirely run its course.

What is an SSD drive letter? It is simply the letter assigned to a hard drive so that you can differentiate between the various installed hard drives on your computer.

To see the current letter associated with your main hard drive, go to the start menu and locate the tab called “this PC’. Typically the primary storage is called “C”, and the reserved or secondary ones are “F” and “E”.

To apply and assign a new letter to a drive, you need to open the Disk Management tool.

Surprisingly, just applying this fix can sometimes force your PC to recognize an unknown hard drive correctly (windows coding works in mysterious ways). 

There are certain times when the SSD itself is appropriately working. Still, due to an error generated in the RAM, this can hinder the detection of a newly added hard drive. 

RAM is responsible for assigning easily accessible memory to all computer components in need, including hard drives. For proper communication between both devices, make sure to fix any present memory issues with a simple to run diagnostics tool.

Running the windows memory troubleshooter can take a long time. Time taken depends on the severity of the memory leak or issue; make sure you don’t have any immediately urgent work on that computer. 

After the process finishes, the computer will automatically reboot itself.

If you have performed all the steps above and the new SSD still doesn’t show up, you should be covered by a warranty. In that case, return the SSD to the seller and ask for a replacement.

Suppose you already have essential information and data stored on the SSD. In that case, it is still not showing up as adequately connected/missing or malfunctioning.

The best resort is to send the SSD to a specialist dealing with data extraction. You can also do this yourself, but it would require a computer with an already working primary drive. Here is the only step to recover data yourself:

Download any reputable third party Data Recovery software and run it on the drive

Let the software run its course and see which files it could recover. The more read/write cycles that SSD has had, the harder it is to recover. But it’s worth trying before you throw it away.

From my personal experience, sometimes a newly installed SSD will not show up in the BIOS but instead, appear in the devices tab.

How to check if the SSD is listed under the hardware section in the device manager

The primary drive refers to the drive that your computer uses to load up any installed operating system, be it Windows Mac or Linux. A mismatch occurs the most when installing more than one hard drive simultaneously, as the motherboard will struggle to guess which one has an operating system.

A word of caution: Under no circumstances do this swap unless you have an already installed operating system on that SSD that you want to set as primary. If you do this procedure incorrectly, you can be locked out from your primary OS hard drive.

Before you do these steps, your SSD must be selected as a secondary drive, not a primary one (see the steps above on how to change priority). 

Plug any new SSD and start your computer for the initializing prompt to appear.

For Windows 7 and older versions, the procedure is different

For Windows 8 and newer versions, the steps are:

You have successfully formatted the SSD, and it is ready to be used.

Suppose you experience an unexpected power outage or accidental system shutdown. In that case, the operating system can fail to recognize an SSD drive upon reboot. The first way to solve this issue is to reconfigure your Windows power options

To optimize the power settings (of the battery, UPS or wall power draw), follow these steps:

Tick the box and reboot your computer.

An alternative way to solve this issue is to connect the SSD that is not recognized via a USB cable directly to one of your USB ports. Use the set of USB connectors on the back of your Desktop for optimal power draw.

After your computer recognizes the hard drive, unplug it and then install it directly to the motherboard.

Two leading causes for an SSD that is not showing up as plugged in

The drive is physically not correctly connected via the cables. 

The drive is not configured correctly and formatted

When it comes to troubleshooting SSD’s more often than not, the solution is something incredibly mundane and simplistic. 

Something as minor as how Windows assigns that drive its letter can be the difference between the System recognizing the presence of an SSD

A last note about the second-hand market for complex drive parts in particular:

Abstain from buying used SSD drives! You never know if they have bad sectors or have too many write/read cycles already to the point where performance is horrific.

Update the detailed information about Switch Dock Not Working? Try These Fixes on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!