You are reading the article Why And How To Turn Off Background App Refresh On Iphone & Ipad updated in November 2023 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Why And How To Turn Off Background App Refresh On Iphone & Ipad
You can turn off Background App Refresh on your iPhone or iPad to save cellular data and extend the battery life.
In this tutorial, we’ll tell you what Background App Refresh is and how to disable it for all apps or only selected apps. Plus, we’ll show you how to turn it off only for cellular data or for both cellular data and Wi-Fi.What is Background App Refresh on iPhone and iPad?
Background App Refresh on iPhone, iPad, and iPod touch is designed to permit apps to check for new content in an intelligent and controlled manner, even when they’re not running or showing on the screen.
With background fetching, your favorite apps are always fresh and ready for the next launch with up-to-date content. For instance, Twitter may fetch new tweets in the background; Facebook Messenger may load new messages and their attachments so that they’re there as soon as you launch the app; a cloud storage app may retrieve newly uploaded files, etc. That way, apps launch faster and open with the freshest content.Why should you disable Background App Refresh on iPhone and iPad?
With Background App Refresh enabled, apps are permitted to refresh content all the time constantly. This uses the internet and depletes the battery. Therefore, to save cellular data and extend your battery backup, you can turn off Background App Refresh on your iPhone, iPad, and iPod touch.
Note: Background App Refresh is automatically paused temporarily as long as your iPhone or iPad is in Low Power Mode.How to turn off Background App Refresh on iPhone and iPad For all apps
Open the Settings app and go to General.
Tap Background App Refresh.
Tap Background App Refresh once again. From here, select:
Off: To disable background content fetching for all apps and on both Wi-Fi and cellular data.
Wi-Fi: If you want Background App Refresh to happen only on Wi-Fi, tap Wi-Fi.
Wi-Fi & Cellular Data: Finally, if you want to keep Background App Refresh enabled for all apps on both Wi-Fi and mobile data, go ahead and select Wi-Fi & Cellular Data.For selected apps
As mentioned, Background App Refresh saves data and battery. Therefore, you’ll be inclined to turn it off completely. However, with some apps like WhatsApp, this can cause a problem and lead to delayed notifications for new messages. WhatsApp even goes a step further and asks you to turn on Background App Refresh if you turn it off.
Similarly, at times, some widgets, like Weather, may not show the updated information if Background App Refresh is off.
Therefore, you can choose to turn off Background App Refresh for all apps except a few, like WhatsApp and Weather. I have done this on my iPhone. Here’s how:
Make sure it says On or Wi-Fi next to Background App Refresh. If it’s Off, tap it and choose Wi-Fi or Wi-Fi & Cellular Data. What these do is already explained in the above heading.
Scroll down the list of apps and turn off the switch for those apps for which you want to disable Background App Refresh.
I know many users who leave it off all the time. Are you among that group, and why?
Check out next:
You're reading Why And How To Turn Off Background App Refresh On Iphone & Ipad
Does your iPhone switch off randomly even if it has sufficient battery left, and then refuse to turn back on? Follow along as we share why this happens and how to fix an iPhone that keeps shutting down on its own.
Why does your iPhone shut down randomly?
Your iPhone will shut down randomly due to high temperature, software bugs, app crashes, water damage, or glitches picked up during regular use. Secondly, your old iPhone can also keep turning off due to poor battery health. You can check the battery health of your iPhone and understand more here.
During an episode of our podcast, I mentioned that I had overslept that morning due to my iPhone 11 Pro turning itself off overnight. It was positioned perfectly on a wireless charger, with plenty of battery left from the day before, and it had no water damage or any other notable hardware concerns. It simply turned itself off and wouldn’t turn back on.
As it turns out, this is just one of those things that sometimes happens to iPhone models X and newer. Luckily, after some stringent Googling, I could work out an easy fix for it. So I thought it would be helpful if I shared that fix (and some more) in case you’re ever unlucky enough to come across this weird bug.
How to fix an iPhone that won’t turn back on
Force restart your iPhone
Once you’ve confirmed your iPhone has at least some battery, and it won’t turn on with a simple press of the power button, go ahead and perform a force restart. We have a dedicated tutorial for all devices. If you have iPhone 8, X, or later, we have recapped the steps below:
Press the volume up button and release it quickly. This is more of a tap than a press-and-hold.
Do the same thing with the volume down button. Again, it’s just a quick press.
Press and hold the Power/Sleep button, and this time keep holding until you see the Apple logo appear on the screen.
The steps should be done rather quickly: press volume up, press volume down, and then press & hold the Power button. If you hold on to one of the volume buttons too long or don’t hold the power button long enough, it may not work.
Plug your iPhone into charging
If a force restart isn’t able to switch on your iPhone, plug it into charging for at least 15 to 30 minutes. Once the battery is adequately juiced up, try to switch on your iPhone normally or force restart it again.
Let the iPhone cool down
iPhone can heat up significantly if left on a wireless charger or a sunny day with maximum brightness, GPS, and many running apps. Once the internal temperature gets high enough, your iPhone becomes almost unusable or shuts down. You can turn it back on after it has cooled down.
Reset all iPhone settings
If your iPhone keeps turning off, reset all settings, and this should hopefully fix the problem.
Check for water damage
Your iPhone has a Liquid Contact Indicator (LCI) that is normally white or silver. But when it comes in contact with water, it turns red. Here’s how to determine if your iPhone is water damaged or not:
Set your device in bright light, and also make sure you have a flashlight handy.
Take out the SIM card tray and look inside.
If the LCI is red, water has gone inside your device, due to which it is performing inconsistently and turning off randomly or refusing to power on. Take it to an Apple Store to fix the problem.
Related: iOS 10 and later warn you if liquid is detected in the Lightning port
Try DFU mode or full erase and set up
Once you have followed everything and the problem continues, put your iPhone in DFU mode (Device Firmware Update) and erase it. This will remove everything from your device and fix the software issues causing your iPhone to turn off and refuse to turn on. Before proceeding, make sure your back up your iPhone to iCloud or computer.
Related: How to erase everything on your iPhone, iPad, or iPod touch
Note: If you can’t use DFU mode due to lack of technical skills or fast internet, take it to an Apple Store, and they should assist.
Finally, if nothing helps, book an appointment at your nearest Apple Store or Apple-authorized store and get your device inspected. They will inspect the iPhone and tell you the exact hardware problem related to the internals or the battery.
Check out next:
Since Windows 10, has changed dramatically. In Windows 11, like Windows 10, managing notifications has become easy. If you have moved from Windows 7 to Windows 11, you might not know how to manage notifications productively. That is why this article will teach you all the things about managing notifications in Windows 11 so that you do not waste any time.How to manage Notifications in Windows 11
Managing notifications in Windows 11 is relatively straightforward if you know the game. The best thing about this section is that you can manage what you want to get and what to ignore. Even if you have a rough idea about the Notification Center in Windows 11, you can follow this guide. This guide will help you manage your notifications irrespective of the app. From setting priority to enabling Focus assist, you can learn every aspect of managing notifications in Windows 11 using this step-by-step tutorial.How do I view notifications in Windows 11?
After that, you can manage everything as per your requirements.How to enable or disable Notifications in Windows 11
At times, you might not get notifications in Windows 11 due to various reasons. If so, the first thing you need to check is whether the notifications are enabled or not. If this setting is not turned on, you won’t get any notifications and vice versa.
To enable or disable notifications in Windows 11, do the following:
Open Windows Settings on your computer.
Toggle the Notifications button to turn it on.
After that, you can find notifications from apps and games. On the other hand, if you do not want to receive any notifications, you can toggle the same button to turn it off.How to turn off Notifications from specific apps in Windows 11
Many times, you install an app, and it starts showing notifications frequently for any reason. If the same thing happens with you and is distracting, you can disable the notifications from that particular app. Whether it is an email app, browser, or anything else, the settings apply to all of them.
To turn off notifications from specific apps in Windows 11, do the following:
Press Win+I to open Windows Settings.
Ensure that you are in the System tab.
Find out the app from the Notifications from apps and other senders section.
Toggle the corresponding button to turn it off.
After that, you won’t get notifications from that particular app on your computer.How to clear one or all Notifications in Windows 11
Let’s assume that you have got an email and you want to read it later. Therefore, it is better to clear that notification to make space for another one. As the space is pretty limited, you might often need to clear some old notifications to get new ones.
To clear one notification from the notifications center, follow these steps:
Select the notification you want to clear.
Then, all the notifications will be removed at once.
It is also possible to clear all notifications from one particular app. It is handy when you want to remove all the notifications from any particular app, such as Outlook, Google Chrome, etc.
If you do so, it will clear all the notifications for the particular app.Notifications settings for apps
Windows 11 offers a lot of notification settings for apps. The best thing is that you can customize notifications for each app separately.
To manage notifications settings for apps in Windows 11, follow these steps:
Show notification banners or Show notifications in the notification center. There are two types of notifications you can display in Windows 11, and you can choose one option between these two.
You can play a sound when a notification arrives. If you want to play the notification sound, you need to toggle the Play a sound when a notification arrives.
You can set priority for notifications. There are three tiers: Top, High, and Normal. You can choose one tier as per your requirements. Depending upon the setting, Windows 11 will show the notifications from the selected app in the notification center.How to disable or hide notifications on the lock screen
By default, Windows 11 displays notifications on the lock screen. At times, you might find it cluttered right after turning on your computer. If you want to hide such notifications from the lock screen to make the display uncluttered, here is how you can hide them:
Press Win+I to open Windows Settings.
Tick the Show notifications on the lock screen checkbox to enable and remove it to disable.
After that, you cannot find any notifications on the lock screen on your Windows 11 computer.How to enable or disable notifications sound in Windows 11
Whenever you receive a new email or any other notifications, Windows 11 plays a sound so that you can know about it. If this sound makes you distracted, you can disable notifications sound in Windows 11 using this guide:
Open Windows Settings.
Expand the Notifications section.
Tick the Allow notifications to play sounds checkbox.
However, if you want to enable or disable notification sound for a particular app, you need to open an app from the Notifications from apps and other senders section and toggle the Play a sound when a notification arrives button to turn on or off.
Windows 11 will play the notifications sound depending upon your setting.How to use Focus assist to manage notifications in Windows 11
Focus assist is equally responsible for showing or hiding notifications on your computer. It disables all the notifications at once. You can choose between Priority only and Alarms only options.
If you choose the former option, you can select the priority list. However, if you select the latter option, you won’t get any notifications other than your alarms.Set Automatic rules for notifications in Windows 11
Automatic rules are the last thing you need to check in order to manage notifications in Windows 11. You can enable or disable certain types of notifications at a predefined time using this setting. It is recommended to read this article to know more about Automatic rules of Focus assist in Windows 11.Why can’t I turn off notifications on Windows 11?
If you cannot turn off notifications on Windows 11, you need to check the Windows Settings panel first. As it allows users to enable or disable notifications for specific apps, you need to check individual settings. Following that, it is suggested to check the Focus Assist settings as well.
Although Apple Watch is the finest wearable for iPhone users, it might take some time to get used to everything it has to offer. Users are often unaware of the bright green lights that often illuminate the Apple Watch’s back. In this post, I’ll explain what that green light indicates and how you can turn it off on your Apple Watch.
What is green light on Apple Watch?
Your Apple Watch’s green light is an optical heart sensor that indicates your heart rate. Apple did this with the help of the green light because blood is an excellent absorber of this particular color.
They combined the green LED lights with light-sensitive photodiodes, which can measure how much blood is flowing through the wrist. When wearing your Apple Watch properly, it releases green light that passes through the wrist hundreds of times per second, measuring blood flow and counting the number of heartbeats each minute.How to disable green light on Apple Watch
The green light on the Apple Watch doesn’t hurt your skin. However, if you find it irritating, you may disable it by employing the below-mentioned techniques.Permanently disable the green light
You can completely shut down the green light emitting from your Apple Watch using either your iPhone or the Watch.
Using Apple Watch:
Press the Digital Crown → open the Settings app.
Tap Heart Rate.
Launch the Watch app.
Tap Privacy in the My Watch tab.Temporarily turn off Apple Watch green light
The steps listed below will temporarily turn off the green light on your Apple Watch if you don’t want to disable it permanently.
Finish Heart Rate monitoring: Hold off until your heart rate has been recorded. While it is measuring your heart rate, the green light flashes continually. It will switch off automatically after completion. So, simply ignore it for a bit.
End a breath or reflection session: Swipe right and choose End when in a breath or reflection session. This ends the session and disables the green light while turning off the heart rate.
Stop a workout session: Swipe right on the Apple Watch display and choose End. This will end your workout and break heart rate monitoring, turning off the green light.FAQs
Q. Why isn’t the green light on my Apple Watch working?
One of the prominent reasons that the green light isn’t working on your Apple Watch could be that you may have unintentionally disabled your Apple Watch’s Heart Rate functionality.
Q. Why is the green light on my Apple Watch on when I’m not wearing it?
Even if you aren’t wearing your Apple Watch, you may occasionally notice the green light emanating from the rear sensors. This is because an app may be active and trying to monitor your heart rate.
Q. What happens after you disable Heart Rate on your Apple Watch?
While you’re wearing it, the heart rate tracking ends when you turn off the heart rate function, which also permanently turns off the green light emission.
That’s it! It’s quick and straightforward to switch off the green light on your Apple Watch. While turning off the green light on your Apple Watch prevents it from providing regular heart rate data, it also offers you benefits, including battery life preservation and interruption prevention.
Bhaskar is a member of the iGB family and enjoys experimenting with words and rhythms. He also has a knack for web and app development. If not writing, you may find him on strings or engaging in sports. And by evening, his quotes will be appearing on your Instagram feeds.
Apple’s much-awaited video editor app is finally out. And if the first impression is anything to go by, it’s going to win a lot of hearts. Understanding how excited you are to take this video app for a spin, here I’m with a simple but pretty helpful guide to let you take and edit videos and photos in Clips app on your iPhone.
One thing you need to know that Clips app supports only 64-bit devices like iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE, iPhone 7/7 Plus, iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2, iPad Pro etc. It requires iOS 10.3 or later. Hence, make sure your device is compatible with this all new video app before going ahead with the steps.
How to Use Clips app on iPhone
Take Video in Clips app on iPhone
Step #1. Open Clips app on your device.
Step #2. Check out the camera switch on the bottom right to switch between rear and front camera.
There is also a record audio button; if you don’t want to record the audio, simply tap on it to mute it.
Step #3. Now, you need to touch and Hold to Record the video. While recording video, you will be able to pinch on the live view to zoom in or out → Once you have recorded the video, simply leave the video recording button.
Take Photo in Clips on iPhone
The captured photos are very much like a static video in Clips.
Step #1. Open Clips app on your device. Then, tap on the Photo tab.
Step #2. Check out the flash button at the bottom left corner. Tap on it to switch between Auto white, on yellow or turn off.
Step #3. There is also a camera switch to let you switch between front and rear camera → Next, tap on the shutter button at the bottom to snap the pic.
If you are not quite pleased with the quality of the pic you have just snapped, tap on Retake.
Step #4. You can Touch and Hold to Add This Photo to insert a pic as a clip.
Note: Make sure to hold on it for 1 second to allow it to get inserted.
You have the option to pinch or swipe on the live view to zoom in or out or pan at the time of inserting the photo.
Step #5. In the end, tap on Done button to confirm.
Start a New Project in Clips on iPhone
Clips app allows you to organize your cool videos into special Projects. This is exactly what you should use to give your multiple videos to spell magic together. You will add more clips to project and edit them as desired.
Step #1. Launch Clips app on your iOS device. Then, tap on the Projects button (a downward arrow) at the top left corner.
Step #2. Now, tap on the New Video button.
Step #3. Next, record the video as usual. Then, tap on Done at the bottom right corner to confirm.
Note: To add or edit any project, just tap on the Project button, select the one you want to add/edit and go ahead with the usual process.
Insert Existing Photos and Video into Clips on iPhone
By inserting already existing photos and videos into clips, you can bring plenty of fun into the play.
Step #1. Open Clips app and then tap on the Library tab.
Step #2. You can now select the photo or video which you want to add to clips. Tap on the Albums button to switch to other albums.
Step #3. If you don’t want to record audio, tap on the record button to mute it.
Step #4. Now, simply touch and Hold to Add This Clip/Photo to insert the video or photo. You get the option to pinch or swipe on the live view to zoom in or out or pan at the time of inserting. Tap on Done at the bottom right corner to confirm.
Mute or Unmute Audio in Clips
You can easily mute or unmute audio even in the recorded clips.
Step #1. Just tap on the Clip you wish to mute or un-mute.
Step #2. Now, tap on the Sound button.
Trim or Untrim Clips on iPhone
If you have trimmed videos in Photos app, you won’t have any difficult time in trimming/untrimming your clips.
Step #1. Tap on Clip you wish to trim.
Step #2. Next, tap on Edit button (Scissor icon).
Step #3. Now, you need to drag the left or right Trim control to remove the unwanted portion of the video. Finally, tap on Apply.
Move and Rearrange Clips
After you have snapped or inserted a clip, you will be able to easily change its sequence and order.
Step #1. Open the Clips app.
Step #2. Next, touch and hold on the Clip located at the bottom and drag it to the new position.
Save Clips to Camera Roll on iPhone
Step #1. Simply tap on the clip you want to save.
Step #2. Now, tap on the Save button at the top right corner.
Access Saved Clips on iPhone
Step #1. Open Photos app on your device.
Step #2. Now, make sure Albums tab is selected.
Step #3. Tap on Clips folder.
Step #4. Check out all of your saved clips.
Share your Projects in Clips app on iPhone
Step #1. Open Clips app on your iPhone.
Step #2. Tap on the Projects button.
Step #3. Now, select the project you wish to share → Tap on the share button at the bottom right corner.
Step #4. Now, choose the medium through which you wish to share your project.
Add Live Titles to Clips
Needless to give pain to your fingers to type titles or phrases for your videos when you can instantly add them using your speech. Jump over to this guide to add Live Titles to clips.
Add Filters and Effects to Clips
Add some cool filters and effects to adorn the quality of your clips. Head over to this tips to beautifying your pics.
How to Add Soundtracks and Music to Clips
You can make your clips more vivid by adding your favorite soundtracks or music. Moreover, you have got the option to even change or remove tracks at anytime you don’t want it. Check out this post to add soundtracks or music to clips.
Delete Clips on iPhone
Step #1. Your existing clips will show up on the bottom. Select the one you want to delete and tap on it.
Step #2. Tap on the Delete button.
Step #3. Tap on Delete Clip.
Delete the Entire Project in Clips on iPhone
Step #1. Open Clips app and then tap on Projects button at the top left corner.
Step #2. Now, you need to touch and hold on any of your projects to enter delete mode.
Step #3. Tap on the Delete button. Then, tap on Delete Video.
The Bottom Line
Clips app is pretty good regarding functionality. It allows you to capture cool videos/photos easily and edit them to your best liking. So, snap as many spectacular pics as you want and share them with your friends via social sites as well as iMessage.
You would like to check out:
Jignesh Padhiyar is the co-founder of chúng tôi who has a keen eye for news, rumors, and all the unusual stuff around Apple products. During his tight schedule, Jignesh finds some moments of respite to share side-splitting content on social media.
Pressing the power button on your Windows laptop or desktop computer turns on the screen and keyboard backlight. However, a faulty power button, overheating, or a loose battery connection can prevent your laptop from turning on.
If your laptop doesn’t turn on when charging or on battery power, the troubleshooting steps below should get it working again.
Table of Contents1. Disconnect External Accessories
External devices and accessories (monitors, SD cards, USB drives, HDMI cables, etc.) can prevent your laptop from turning on. Unplug any accessory connected to your laptop and try turning it on again.2. Check Indicator Lights for Hints
Pay attention to your laptop’s indicator light when you press the power button. The LED lights on some Dell and HP laptops blink in a programmed sequence to indicate possible battery or CPU failure.
A blinking LED light could also signal problems with your laptop’s Complementary Metal-Oxide Semiconductor (CMOS) battery. Without the CMOS battery, the Basic Input/Output System (BIOS) program can’t boot your laptop’s operating system.
Contact your laptop manufacturer if one or more of your device’s LED indicator lights blink intermittently when you press the power button. You could also check the manufacturer’s support website or instruction manual to learn what the diagnostic LED lights depict.3. Charge the Laptop
Your laptop won’t turn on if it’s out of battery power. Charge your laptop from a wall outlet for 10-15 minutes and try turning it on again.
Counterfeit or knockoff power cables may not provide enough amperage or voltage to charge or boot your laptop. Hence, we recommend using the power supply that came with your laptop.
If your laptop’s power indicator doesn’t come on when connected to power, your charger is probably faulty.
A faulty wall outlet won’t charge or power on your laptop. Plug your power connector into a functional wall socket and ensure the connection isn’t loose.
If the wall socket powers other devices but your laptop, the power cord or adapter is either broken or unsupported. Buy replacement power accessories from your laptop manufacturer or authorized resellers.4. Reinsert or Replace the Battery
Your laptop won’t turn on if its battery is bad or inserted incorrectly. Detach and reinsert your laptop battery if it’s removable. You can also try restoring your battery by freezing or recalibrating it. Replace the battery if it still doesn’t power your laptop.5. Leave Your Laptop to Cool
Your laptop may shut down randomly and refuse to turn on if the battery, CPU, or other system components are overheating. It’s a thermal protection precaution to prevent hard disk failure or motherboard damage.
Place your laptop on a flat table and ensure nothing blocks the cooling vents. You could also use a cooling pad or external cooling fan to reduce your laptop’s temperature. Wait at least 30 minutes before turning your laptop back on.
If the overheating persists, your laptop’s internal fans could be broken or clogged. Refer to our tutorial on fixing laptop fan issues for troubleshooting solutions.6. Increase Screen Brightness
Does your power indicator or keyboard backlight come on when you press the power button? Do you hear the fan spinning or whirling, but the display remains black or blank? Your laptop likely has a black screen because the display brightness is low or on the lowest level.
Press the brightness-up key on the top row of your keyboard to increase your laptop’s display brightness. Press the key repeatedly until your laptop’s display comes on.7. Wake Your Laptop’s Screen
Windows has two keyboard shortcuts that can snap your laptop out of a blank or black screen. Try the keyboard shortcuts below if your laptop’s screen won’t come on when you press the power button.
Press the Windows key + P on your keyboard and wait a few seconds. The shortcut opens the Windows “Project” pane, where you can choose a presentation mode.
Ctrl + Alt + Del is another key combination that can wake a Windows computer screen. It reboots Windows and could help your laptop startup correctly.
The key combination opens a screen with several device management options if your laptop is stuck on a black screen.8. Restart/Reset Your Graphics/Display Driver
If your laptop screen still doesn’t come on, there’s possibly a problem with your display adapter. Restarting the display adapter might fix the issue with your screen.
Disconnect all devices or accessories plugged into your laptop and press the Windows logo key + Ctrl + Shift + B.
Your laptop should make a beep, and the screen should come on in 5-10 seconds. Contact your laptop manufacturer or visit a repair shop to assess and replace the display/graphics adapter.9. Fix Your Display Driver in Safe Mode
Does your laptop come on and immediately go back off? Boot into Safe Mode and update or reinstall your graphics/display drivers to fix the issue. Roll back the driver if your laptop stopped turning on after installing a driver update.
Note: If your laptop’s hard drive is encrypted, you’ll need your BitLocker key to enter Safe Mode. For more information, refer to our tutorial on finding BitLocker recovery keys in Windows.
for 10-15 seconds to power off your laptop.
Wait 10 seconds and press the
to turn on your laptop.
Press and hold the
for 10 seconds when your screen or keyboard lights up, or when you see the manufacturer’s logo. Release the power button when your laptop shuts down.
to turn on your laptop.
for another 10 seconds when the screen/keyboard lights up, or when you see the manufacturer’s logo.
Wait for your laptop to shut down and press the
to turn it back on. Your laptop should boot to the Automatic Repair screen.
to enter the Windows Recovery Environment (winRE).
on the “Choose an option” screen.
on the next page.
to boot into the Startup Settings page.
on your keyboard to
Enable Safe Mode with Networking
Search automatically for drivers
and follow the instructions on the next page.
Head to the “Driver” tab and select
Roll Back Driver
Choose a reason you’re rolling back the driver and select
to downgrade to an older driver.
Exit Safe Mode and boot your laptop into normal mode after the driver update. Press the
Shut down or sign out
, and choose
.Get Your Laptop Working Again
If your laptop still doesn’t turn on after trying these fixes, some hardware components are failing or damaged. Visit a computer repair technician or send your laptop to the manufacturer for repair or replacement.
Update the detailed information about Why And How To Turn Off Background App Refresh On Iphone & Ipad on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!