You are reading the article Wifi Adapter Not Working On Windows 11/10 Computer updated in March 2024 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Wifi Adapter Not Working On Windows 11/10 Computer
If you notice you’re having network & internet connection problems on your Windows 10 or Windows 11 PC and issues like Unidentified network appearing, the Wi-Fi connection is limited, low Wi-Fi signal strength or the WiFi adapter is not working at all, then this post is intended to help you with solutions to the issue.Why won’t my Windows 10 let me connect to WIFI?
Typically, your Windows 10/11 computer won’t connect to a network if Wi-Fi has been disabled on the device. Power-cycling or a simple reboot of your internet device (modem and router) usually fixes most network connectivity problems. Unplug your modem and router from the power socket, wait a minute, plug in your modem, wait a minute, and then plug in your router.How do I know if my wireless adapter is bad Windows 10?
To know if your wireless adapter is bad, simply open Device Manager on your Windows PC. Expand the Network adapters section, and If there’s an exclamation or question mark beside the wireless adapter, then you have a wireless problem; if not you’re OK. But if your wireless adapter is still not working, then the solutions below can help you.WiFi Adapter not working on Windows
If you’re faced with this WiFi Adapter not working issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.
Run Network Adapter Troubleshooter
Update WiFi adapter drivers
Make sure WiFi adapter is enabled
Reset WiFi adapter
Use ethernet adapter
Replace WiFi adapter
Let’s take a look at the description of the process involved concerning each of the listed solutions.1] Run Network Adapter Troubleshooter
First troubleshooting step to take in attempt to resolve the WiFi Adapter not working issue is to run the Network Adapter Troubleshooter. If this automated solution doesn’t fix the issue, try the next solution.2] Update WiFi adapter drivers
You can either update your WiFi drivers manually via the Device Manager or you can get the driver updates on the Optional Updates section under Windows Update. You can download the latest version of the driver from the WiFi adapter manufacturer’s website.
Still not working? Try the next solution.3] Make sure WiFi adapter is enabled
This solution requires you to make sure the WiFi adapter is enabled and WiFi is turned on for your Windows PC.4] Reset WiFi adapter
You can also reset your WiFi adapter and see if the issue at hand is resolved.5] Use ethernet adapter
Using the ethernet adapter is a viable option if you’re willing to give up the convenience of connecting to the internet via WiFI. If that’s not an otion for you, try the next solution.6] Replace WiFi adapter
At this point, it’s most likely the WiFi adapter is faulty. So, if your Windows PC is still under warranty, you can have the WiFi adapter replaced. If not, you may need the services of a PC hardware technician to replace the inbuilt WiFi adapter or you can opt for a USB Wireless Adapter Dongle you can attach via USB port on your computer.
Hope this helps!Is a dongle Wi-Fi or Bluetooth?
Basically, Bluetooth adapters are USB-based hardware devices that allows PC users quick and easy connections among various devices on Windows PC. On the other hand, USB WiFi adapter is a networking device that uses radio waves to provide high-speed network connectivity.Can’t connect to 5ghz Wi-Fi Windows 10?
There could be a handful of reasons why the 5GHz WiFi is not detected on your Windows 10 PC – these includes, the hardware of your computer doesn’t support 5GHz bandwidth, the WiFi router does not support 5GHz bandwidth, the 5GHz is set up incorrectly on your PC or on your WiFi router, improper WiFi adapter drivers are installed on your computer, or the drivers are outdated.
Related post: Internet or WiFi gets disconnected after Sleep.
You're reading Wifi Adapter Not Working On Windows 11/10 Computer
In this article, we will help you to fix Chrome Autofill not working problem on a Windows 11/10 computer. The Autofill feature is helpful to automatically sign in to websites using the saved passwords in Chrome, fill in payment forms or information, addresses, etc., which makes things easier for users. But, sometimes, users face the issue that the Autofill feature doesn’t work for certain sites or all sites. If you are also having such an issue, then you can try the solutions covered in this article.Chrome Autofill not working on Windows 11/10
Here is a list of solutions that can help fix this Chrome Autofill issue:
Configure Autofill Settings
Check Sync Settings
Update Google Chrome
Clear cookies and cached data
Turn off Chrome extensions
Create a new User Profile.
Let’s check these solutions one by one.1] Configure Autofill Settings
If the Autofill settings are not configured or set properly, then also it can cause this type of problem. So, you should check and set the Autofill settings for all three categories which include Passwords, Payment methods, and Addresses and more. For this:
Type chrome://settings/autofill in the Omnibox
Press the Enter key. This will open the Autofill section.
Now you can access each category one by one and set the required options for auto-filling the data.
For this category, do the following things:
Turn on the Auto Sign-in option
Turn on the Offer to save passwords option
Also, scroll down the page to access the Never Saved section. Here, remove those websites from the list for which you want the Chrome Autofill feature to work again.
In this category, turn on:
Save and fill payment methods option
Allow sites to check if you have payment methods saved option.
Addresses and more
Here, turn on the Save and fill addresses option so that you can automatically fill information like email addresses, phone numbers, etc., to sites from the previously saved information and also save the new information.2] Check Sync Settings
If you are able to use saved payment details, passwords, etc., on a device, but not on another device, then you should check your sync settings on that device and make sure that options related to the Autofill feature are enabled. To do that, use these steps:
Type chrome://settings/syncSetup in the Omnibox (or address bar)
Press the Enter key
Access Manage what you sync section
Select the Customize sync option
Under the Sync data section, turn on the buttons available for Addresses and more, Passwords, and Payment methods, offers, and addresses using Google Pay3] Update Google Chrome
An outdated program or application can cause different issues to a program and its features. The same could be the case for the Autofill feature of Google Chrome. So, it is good to update the Google Chrome browser that can help you fix known issues and bugs and it might also this Autofill feature problem.
Related: How to transfer Google Chrome profile to another computer.4] Clear cookies and cached data
Outdated cache, site settings, and corrupt cookies can also affect the Autofill feature of Chrome because of which it is not working as expected. So, you need to clear such browsing data. The steps are as follows:
Open Google Chrome browser
Press Ctrl+Shift+Del hotkey. This will open the Clear browsing data section in a new tab
There, access the Advanced tab
Set Time range to All time using the available drop-down menu
Select Cookies and other site data option
Select the Cached images and files option
Uncheck the rest of the options like Autofill form data, Passwords and other sign-in data, etc.
Press the Clear data button.5] Turn off Chrome extensions
It might be possible that some of the Chrome extensions installed by you are interfering with the Chrome Autofill feature. As a result, that feature is not working for all or specific sites.6] Create a new User Profile
If your default user profile is corrupted, then it can cause various problems, including this one. In that case, you need to create a fresh default profile for that user account. You will lose your locally stored data. Here are the steps:
Exit or close the Chrome browser completely
Open File Explorer on your Windows 11/10 computer
Access the User Data folder of the Chrome browser. For this, enter the following path in the address bar of File Explorer and press the Enter key:%UserProfile%AppDataLocalGoogleChromeUser Data
Now rename the Default folder with chúng tôi folder or some other name. That will also work as a backup for your previous profile
Launch Google Chrome
Sign in to the Chrome browser with your Google account. All your browsing history, extensions, and other data will be synced (if saved).
This will create a fresh user profile and a new Default folder to store local data on your Windows 11/10 computer for the Chrome browser. Now you should be able to use the Google Autofill feature.
If none of these options work, then you should reset Chrome browser settings to default.How do I fix Chrome Autofill?
If the Chrome Autofill feature is not working, then you can try some fixes like updating the Chrome browser, clearing cached data, checking sync settings, etc. We have covered all such solutions in this post above. Try these fixes and then you will be able to autofill passwords, addresses, and other data from the saved information again on your Chrome browser.Why is autocomplete not working in Chrome?
If Google Search autocomplete feature is not working in your Chrome browser, then most probably it is turned off. If this is the case, then you can turn on or enable autocomplete feature using the following steps:
Type chrome://settings/syncSetup in the Omnibox of Chrome
Press the Enter key
Under the Other Google services section, turn on Autocomplete searches and URLs option.
In addition to that, you can also try other solutions like clear cookies, restart Chrome, disable extensions, reset Chrome, etc.
Read next: How to set up and use Microsoft Autofill Password Manager on Chrome.
This post will talk about different steps you can take if AutoPlay is not working on Windows 11/10. Windows AutoPlay is one of the valuable features in the Windows OS. For instance, whenever you play a music CD for the first time, the AutoPlay feature asks you which media player you want to use if multiple such applications are installed on your system. But many users have reported that AutoPlay is not working on their Windows PC. Worry not if you are also struggling with the same problem. Try the solutions mentioned below to fix the issue.AutoPlay not working on Windows 11/10
Here is a list of all the effective solutions to try if AutoPlay is not working on your Windows 11/10 computer:
Enable the AutoPlay feature again
Change Shell Hardware Detection service
Enable AutoPlay notification
Change AutoPlay settings
Change Local Group Policy
Reset the AutoPlay settingsAutoPlay dialog box not showing? 1] Enable the AutoPlay feature again
There can be a temporary glitch in why the AutoPlay feature is not working on your Windows PC. In this case, you can re-enable the feature to solve the problem. Here are the steps you need to follow to do so.
Open the Settings menu on your system.
Disable the option, and restart your PC.
Come to the location again and enable the option.
Check if it makes any difference. If not, try the next solution.2] Change Shell Hardware Detection service
AutoPlay will not work on your Windows PC if the Shell Hardware Detection service is disabled. So, manually enable the service and check if it solves the problem. You can do so by following the below steps.
Open the Run dialogue box by pressing Windows + R shortcut key.
Type chúng tôi and press the enter key. It will open the Windows Services.
Scroll down the list and locate Shell Hardware Detection.
Check if the problem is fixed or not.
See: How to Limit Media Autoplay in Microsoft Edge browser3] Enable AutoPlay notification
The mentioned problem will occur if AutoPlay is disabled under Windows notification settings. You will have to enable AutoPlay notification to solve the problem. Here’s how it’s done.
Locate and open Notifications.
Enable the toggle present next to AutoPlay.
That’s it. Check if you are still facing the problem or not.4] Change AutoPlay settings
Misconfigured AutoPlay settings can also be a primary reason behind the problem in the question. You will have to change the settings to solve the problem. Here’s how.
Select AutoPlay from the list of options.
Under Choose AutoPlay defaults, change the value to Ask me every time.
Do the same to all the devices installed on your system.
Now, plug in the device and check if the AutoPlay feature is working.
See: How to disable or stop Video Autoplay in Microsoft Edge5] Change Local Group Policy
You can use the Local Group Policy to solve the problem as well. Misconfigured policy settings will disable AutoPlay on additional types of drivers. Here are the changes you need to make in the editor to solve the problem.
To begin with, open the Run dialogue box on your system.
In the space provided, type chúng tôi and press the enter key.
In the following window, select the Disabled option.
Restart your system and check if the problem is solved or not.
Read: How to prevent AutoPlay from remembering User Choice6] Reset the AutoPlay settings
If none of the above solutions were helpful, the last thing you can try is to reset the AutoPlay settings. To do so, follow the below steps.
Open the search bar, type Control Panel, and press the enter key.
Change View by to Small icons.
Restart your system, and you will see that you are no longer facing the problem.How do I disable AutoPlay in Windows 11? How do you reset AutoPlay?
Read Next: Enable, Configure and set AutoPlay defaults in Windows 11/10.
Windows Installer is a core service that manages installations of everything in Windows, including apps, features, and many other things. If, for some reason, it breaks, you will be stuck with new installations and even upgrades of apps.Windows Installer (msiserver) not working
In this post, we will share a list of error codes – and their solution, some pointing to our existing solution – and how to solve them.1] Run Program Install & Uninstall Troubleshooter
The first thing we would suggest is to run the Program Install and Uninstall Troubleshooter to repair issues that block program installation or removal because of corrupted registry keys. This program will fix corrupted registry keys on 64-bit operating systems, which control the update data, problems that prevent existing programs from being completely uninstalled or updated, and problems that block you from uninstalling a program through Add or Remove Programs (or Programs and Features) in Control Panel2] Start the Windows Installer Service
In the Run prompt, type MSIExec, and then press Enter.
If you get the Windows Installer window which tells you everything about MSIExec, then it’s all good.
If you get an error, you might have to start it manually.
You can also run chúng tôi to open Windows Services and go to Windows Installer, and restart it.3] Windows Installer Service could not be accessed
You may see the message Windows Installer Service could not be accessed. This usually happens if the Windows Installer Engine is corrupted, installed incorrectly, or disabled. You will need to fix either the corruption or fix the configuration or enable it. The linked post also solves the issue where the Windows Installer service could not start, and gives the message as Error 5, Access is denied.4] There is a problem with this Windows Installer package
If the Windows Installer package faces unstable network access during the uninstallation or installation process, sometimes, the error might appear if you fail to complete the process successfully. The error message might go like “There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.”5] Windows Installer keeps popping up
Usually, the Windows Installer or chúng tôi runs in the background. You can check in the Task Manager under the list of processes that are running. However, if you see it constantly running, and the Windows Installer keeps popping up, it means it is stuck. It is possible that an installation is not able to complete, and this happens as a result.
Read: Windows Installer Service missing.6] Installation Package could not be opened
If you are not able to install software that you just downloaded from the internet, and it keeps throwing the error message “Installation Package could not be opened“, then it’s probably a security issue. Windows many a time blocks applications you download from the internet as it does not trust them. You may have to unblock it or disable your antivirus to fix it.7] Re-register Windows Installer service
If nothing works, the best option in our experience is to re-register the Windows Installer service. The reason why it works great because it fixes registry issues as well, and gets the basic settings ready again.
Launch the command prompt with admin privileges. Type the following commands and hit Enter after each one.%windir%system32msiexec.exe /unregister %windir%system32msiexec.exe /regserver %windir%syswow64msiexec.exe /unregister %windir%syswow64msiexec.exe /regserver
Close the command prompt, save all your work, and restart your computer.
Check if you are facing Windows Installer issues.
Windows OS maintains a Windows Installer cache. Any files you install are temporarily extracted here and then installed on the PC. If you are deleting files from here manually or during installation or any other program is doing that, you will get an error.How to check Windows Installer version?
To check the version of Windows Installer on your computer, open the Run box, type msiexec -? and hit Enter. You will see the version mentioned at the top.How do I fix a corrupted Windows installer?
Since the Windows Installer is a system file, the best way to repair or fix a corrupted Windows Installer is by running the built-in System File Checker. Alternatively, you could search for the latest version of Windows Installer file on the chúng tôi website and download it from there,
Useful link: How to enable Windows Installer logging.
Is your Netgear wireless adapter not working properly on Windows? Some users have reported that the Netgear wireless adapter won’t work on their PC. Many have complained that its is not even being detected by Windows. Now, why does this happen and how you can fix the problem, let us find out in this guide.How do I enable my Netgear wireless adapter on my computer?
To set up your Netgear wireless adapter on Windows, first download and install NETGEAR adapter software or install a standalone network adapter driver on your computer. After that, connect the Netgear WiFi adapter to a USB port in your PC. Now, simply connect to the wireless network using the Windows configuration tool or the installed NETGEAR software.Fix Netgear Wireless Adapter not working, connecting to internet or detected on Windows
Here are the fixes you can use if your Netgear WiFi adapter is not working properly or is not detected on Windows 11/10:
Check if your PC meets the minimum system requirements for Netgear Wireless Adapter.
Try these generic troubleshooting suggestions.
Update or reinstall Netgear WiFi adapter drivers.
Use NetAdapter Repair to fix adapter issues.
Change your power settings.
Start/restart the WLAN AutoConfig service.
Temporarily disable your antivirus.
Tweak the channel settings for your Netgear adapter.1] Check if your PC meets the minimum system requirements for Netgear Wireless Adapter
If your PC cannot detect your Netgear WiFi adapter, the first thing you should do is check if your computer fulfills the minimum system requirements. Most Netgear USB WiFi adapters have minimum specifications that your system needs to meet. If that is not the case, the wireless adapter won’t be detected or work correctly on your PC. So, do check the Netgear WiFi adapter’s system requirements and ensure that your computer meets them.2] Try these generic troubleshooting suggestions
The next thing you can do to fix the problem is to connect your USB WiFi adapter directly to the computer without using a cradle or extension cable. It might be the faulty cradle or extension cable, so the adapter is not detected on your PC.
You can also check your adapter hardware and make sure it is in proper working condition or not. Insert the network adapter into a different PC and see if the same problem occurs. If yes, the problem is most likely with your adapter. You can get it checked by a technician or replace the device.
If the problem remains, plug your USB wireless adapter into a different USB port and see if the problem is resolved. Furthermore, disconnect other USB devices and then check if Netgear wireless adapter is being detected or not.
You can reset the network adapter in a different PCI slot in your motherboard and check if it helps.
If the above tips don’t help, you can move on to the next solution.
Read: Network Adapter missing or not showing in Windows3] Update or reinstall Netgear WiFi adapter drivers
If the problem continues even after updating network drivers, it might be the case that the drivers are corrupted, which is why you are facing this problem. So, in that case, uninstall Netgear wireless driver, remove your PC, connect your USB network adapter, and install the latest version of drivers. Here are the steps to do that:
Now, expand the Network adapters category and locate your Netgear wireless adapter.
After that, follow the prompted instructions to uninstall the driver.
Once done, reboot your computer and reconnect your Netgear USB network driver.
Windows will now detect the missing driver and reinstall the wireless network driver. You can also download the latest version of the Netgear wireless adapter driver from its official website and then install it on your PC.
See: TP-Link WN821N WiFi adapter not working or detecting networks.4] Use NetAdapter Repair to fix adapter issues
If you cannot fix the issue, use the NetAdapter Repair application to fix issues with your wireless adapter. It is a free tool to fix network adapter problems on your Windows PC. You can download and install it and then run it to troubleshoot network problems.5] Change your power settings
It might be your power settings on Windows due to which your Netgear wireless adapter stops working. So, tweak your power settings and see if the issue is fixed. To do that, you can disable the USB selective suspend settings and Allow the computer to turn off this device to save power options to fix the issue.
Disable USB selective suspend:
Next, set the above option to Disabled for both On battery and Plugged in.
Disable the Allow the computer to turn off this device to save power option:
First, open the Device Manager app and locate your USB Netgear wireless adapter device.
Next, go to the Power Management tab and uncheck the Allow the computer to turn off this device to save power checkbox.
Once done, press the OK button and see if the issue is resolved.
Read: Fix Wi-Fi Networks not showing up on Windows PC.6] Start/restart the WLAN AutoConfig service
If the WLAN AutoConfig service is disabled on your computer due to some modifications or is not running correctly, you might experience this issue. So, if the scenario applies, you can start or restart the WLAN AutoConfig service and check if the problem is resolved.
First, evoke the Run command box using Win+R and enter chúng tôi in it to launch the Services app.
Now, locate the WLAN AutoConfig service and select it.
Then, make sure the Startup type is set to Automatic.
Now, press the OK button and exit the Services window.
Check if your Netgear WiFi adapter is working fine now.
See: You are currently not connected to any networks in Windows.7] Temporarily disable your antivirus
Your overprotective antivirus suite might be preventing Windows from detecting your Netgear wireless adapter. Hence, if the scenario is applicable, you can disable your antivirus for some time, reconnect your USB network adapter, and then check if the problem is fixed.
Once the network adapter is detected, you can enable your antivirus protection. However, if the issue is the same, you can try the next fix.
Fix: Network & Internet connection problems8] Tweak the channel settings for your Netgear adapter
If the above fixes didn’t work for you, try changing the channel settings of your Netgear adapter. 20 MHz of channel width and channels 1, 6, or 11 provide a good WiFi performance. So, try changing the settings accordingly and see if the Netgear network adapter starts working correctly. To do that, here are the steps to follow:
First, open Run using Win+R and enter chúng tôi in it to open the Network Connections window.
I hope this helps!
Related: Netgear Wireless Router not Working or DetectedWhy is my desktop not detecting my Wi-Fi adapter?
If Windows does not detect your WiFi adapter, it likely means that your PC has corrupted or outdated network adapter drivers. Another common reason for the same is OS incompatibility issues. Your power management settings can be another potential cause. The problem might also occur because the minimum system requirements of the device are not fulfilled.
Now read: USB WiFi not working with 100417CF Access Violation error.
Some MS Excel users reported Excel is not opening on their Windows computers, and some other users reported that Excel would open normally but the Excel file would not open. These issues could occur due to various reasons, but they can be broadly classified into three major reasons- misconfiguration in Excel, corruption of the app or related files, and conflicting third-party apps. In this post, we are going to talk about this issue and see what you can do if Microsoft Excel or its files fails to open on your Windows computer.Fix Excel is not opening on Windows 11/10
Excel is a software that is needed in every company and without it, managing the data of the organization is very difficult, well, we are going to resolve this hassle for you. So, if Excel is not opening on your system, follow the solutions mentioned below to resolve the issue.
Start Microsoft Access in Safe Mode
Uncheck the ignore DDE option
Reset File associations
Open Microsoft Access in a clean boot
Remove Workbooks from XLStart Folder and find out the culprit
Run Office Repair
Let’s resolve this issue by using the above methods.1] Start Microsoft Excel in Safe Mode
If you find that Microsoft Excel is not working, it could be possible that some of the mods/add-ins/extensions are corrupted. Opening MS Excel in Safe Mode will allow this app to open without any of them. We can then find out if that’s the case. Use the prescribed solution to run Excel in safe mode.
To open a Run dialog box, Press the Windows + R.
Type “Excel /safe” in Run and press Ctrl + Shift + Enter to run the command with admin access.
After running Microsoft Excel in safe mode wait for a few seconds, and open Excel again. If you face the same issue proceed to the next step.
Read: Excel is freezing, crashing or not responding2] Uncheck the ignore DDE option
Open Microsoft Excel.
Uncheck the Ignore other applications that use Dynamic Data Exchange (DDE) box.
Hopefully, using this method your issue will be resolved.
Read: Cannot close Excel3] Reset File associations
Press Windows + R key to open the run dialog box
Type Control Panel and press enter
I hope, this idea worked for you.4] Open Microsoft Excel in a clean boot
You may encounter the said error due to a third-party app interfering with MS Excel. In that case, you need to perform Clean Boot. To run this app in Clean Boot, use the following steps.
Press Windows + R key.
It will prompt you to restart, select Restart.
Once your system starts, launch MS Excel and check if the issue continues. If MS Excel starts without any problem, manually start services to find the culprit. After knowing which app is causing the problem, you can easily delete it to resolve your issue.5] Remove Workbooks from XLStart Folder and find out the culprit
Any file or workbook present inside the XLStart folder will get loaded in Excel as soon as you launch the app. If MS Excel is failing to launch on your system, we can remove all the files from the folder and then start Excel. To do the same, open File Explorer and go to the following location.
Open the XLSTART folder, cut all of its content and then paste it at any location, make sure that you can remember that location. Once you have moved all files, open MS Excel normally and see if the issue is resolved. In case, Excel is opening without any issues, move XLSTART files back to their original location one by one. If after moving a particular file, MS Excel fails to launch, that file will be the culprit. You can then remove the file or store it somewhere else to get rid of the problem.6] Run Office Repair
You may encounter the said error if MS Excel is corrupted. We have a built-in tool to repair Office and since MS Excel is its part, we run the tool to resolve the issue. Follow the prescribed steps to repair Office.
Open Control Panel by searching it out of the Start Menu.
Go to Programs.
Lastly, complete the on-screen instructions to resolve your issue.
Hopefully, this issue will be resolved by using the solution.
Read: Excel: The File couldn’t open in Protected View.
Update the detailed information about Wifi Adapter Not Working On Windows 11/10 Computer on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!