You are reading the article Windows 10 Kb3124200 Issues: Failed Installs, Broken Apps, Outlook & Edge Not Opening updated in December 2023 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Windows 10 Kb3124200 Issues: Failed Installs, Broken Apps, Outlook & Edge Not Opening
Windows 10 KB3124200 Issues: Failed Installs, Broken Apps, Outlook & Edge not Opening779
Share
X
The recent cumulative update KB3124200 for Windows 10 users was released a few days back, and at the time, we didn’t see to many issues being reported. There were only a few users complaining that the update failed to install, and now we’re getting many more similar problems.
As I was saying, the most commonly encountered problem seems to be the one with failed installs of the KB3124200 update. Here are just some of the complaints sent by users.
One of them says that he is getting the following messages – “Configuring windows update 59%” and “we are unable to complete the update. undoing the changes“. And it seems that this specific message has been confirmed by more users; so do follow the previous link to our specialized article on some potential fixes for this.
This is the third cumulative update that will not install. First KB3116908 then KB3116900 and now KB3124200. Several restarts later I can then log on and then Windows update shows that the update has failed. I have over the past 3 updates, tried all sorts of ways recommended to get an install but everything fails. As I have Windows 10 Home I cannot stop the installs repeating. I am still stuck in a never-ending loop of download, install, failure.
Somebody else has a similar problem:
Upon my PC asking me to restart, I rebooted and it said that it could not apply the changes so it needed to restart to undo the changes, this happened 3 or more times before I was actually able to get into Windows. Now when I turn my PC off, I have this problem when I log back in, or try too.
Expert tip:
this update was downloading in the background when the laptop shut down due to low battery. Going onto mains power and restarting twice still has no effect. It is still showing 45% downloaded. Since I was affected by the original Nov problem with 1511 update, do I need to do the same fix, namely a clean reboot etc?
Here are some more issues which have been reported:
After applying update KB3124200 Edge browser will not close
Cumulative Update for Windows 10 version 1511 for x64 KB3124200 breaks File Explorer
Update KB3124200 causes Outlook 2023 to not start
Windows 10 Version 1511 for x64-based Systems KB3124200 fails every time
Cumulative Update KB3124200 will not install
MS Calculator fails after Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124200)
Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124200).
Outlook won’t open after update KB3124200
After the KB3124200 update for Windows 10, the Store, Calendar, Maps apps become nonresponsive
Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124200) is not downloading
Cumulative update Version 1511 for x 64 based system (KB3124200) causes the Mail and Calendar apps to not open
Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124200) brings up error 0x80242fff
Edge not working after latest update
After running Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124200) I found that more than 10 programs that I use daily have been deleted
Computer won’t start after Windows 10 Version 1511 for x64-based Systems (KB3124200)
Cumulative Update for Windows 10 Version 1511 (KB3124200) has removed all my program files and settings
Cumulative Update for Windows 10 Version 1511 for x64-based Systems (KB3124200) brings up error 0x8007000d
Windows 10 build 10586: unwanted very slow boot time
Potential fix for Windows 10 KB3124200 problemsAs you can see, there are quite many errors and it seems that for the time being there’s no official fix. According to some users, manually downloading and installing the patch could be of some help, so follow these links to try and solve problems:
KB3124200 x64 Windows 10
If you are afraid these issues will affect you, as well, then you can block the update until Microsoft provides a fix or until the next cumulative update. However, this could happen as late as January 2023.
Was this page helpful?
x
You're reading Windows 10 Kb3124200 Issues: Failed Installs, Broken Apps, Outlook & Edge Not Opening
Fix: Avg Installation Failed On Windows 10/11
FIX: AVG installation failed on Windows 10/11
996
Share
X
AVG is a well-known antivirus, that’s both powerful and user-friendly.
So, if AVG got stuck on install, don’t panic – we have all the fixes right here.
Some users reported that reinstalling AVG worked for them, and so did modifying registries.
As a last resort, you could also try using an alternative to AVG antivirus
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix various Windows 10 errors, we recommend Fortect:
This software will repair common computer errors, protect you from file loss, malware damage, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove virus damage now in 3 easy steps:
Download and Install Fortect on your PC
Launch the tool and Start scanning to find broken files that are causing the problems
Fortect has been downloaded by
0
readers this month.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
0
readers this month.
Antivirus is one of the most important software that you have on your PC. Tools such as AVG are designed to protect you from malicious programs, so it’s always a good idea to have an antivirus installed.
Installation problems can always occur, and today we’re going to show you how to fix AVG install error on Windows 10 and 11.
How do I reinstall my AVG? Fix – AVG install errorQuick tip: Use Ninite to install AVG
If you can’t install AVG due to installation errors, you might want to consider using Ninite.
Ninite is a special service that lets you install the most popular programs with just a single installation.
Ninite supports a wide range of applications, and by using it, you’ll skip many installation dialogs and unnecessary bundled apps.
To install AVG using Ninite, simply go to Ninite’s website, check AVG, and download it. After that, run the setup file and wait while AVG is installed.
Fix: AVG install error 0xc0070643 1. Use a third-party uninstallerWhile installing AVG antivirus you can sometimes install AVG PC Tuneup as well, since two applications are often bundled.
If you have AVG install error 0xc0070643, you need to remove AVG PC Tuneup tools from your PC.
To complete the uninstall process, you need to make sure all software leftovers and stubborn apps are removed from your PC. The easiest way to do this is with the help of uninstaller software.
Here’s what a third-party uninstaller can get you:
2. Repair your registryUsers reported that error 0xc0070643 can appear due to problems with your registry.
It seems that there are certain registry permission problems that prevent you from installing AVG.
To fix this problem, you need to download and install a third-party registry cleaner and DLL fixer on your PC.
After problems with the registry are resolved, restart your PC and try to install AVG again.
⇒ Get Restoro
3. Use the AVG Remover toolIf you get installation error 0xc0070643, one of the ways to fix it is to run AVG Remover tool. During the installation process, some AVG files will be stored on your PC.
Those files can interfere with future attempts to install AVG, therefore it’s crucial to remove those files.
To do that, you need to download AVG Remover. Run the tool and wait until it removes the previous installation of AVG.
After the tool removes AVG installation, restart your PC and check if the problem is resolved.
Some users are also suggesting to shut down your PC after you use this tool and turn it back on again, so you might want to try that as well.
Download AVG Reset Access toolUsers are also suggesting downloading AVG Reset Access tool. After downloading the tool, run it and check if the problem is resolved.
Another tool that users are recommending is the AVG BFE Fix tool. Simply download AVG BFE Fix, run it and it should fix the problem.
After using all three tools, AVG install error 0xc0070643 should be resolved. We have to mention that few users reported that this method didn’t work for them.
According to them, the AVG Remover tool didn’t fix the problem, and they were still getting 0xc0070643 description: event exec_finished error while trying to install AVG.
To fix this problem, you need to run AVG Remover from Safe Mode. To do that, follow these steps:
Once the Safe Mode starts, all third-party applications and drivers will be disabled, so there’s nothing that will interfere with the AVG Removal tool.
Simply run the tool and follow the instructions on the screen to remove AVG. After doing that, restart your PC and try to install AVG once again.
4. Download and install the offline version of AVGIf you can’t install AVG antivirus due to error 0xc0070643, you might want to try using the offline installation.
This makes downloading AVG a bit faster since the setup file is only a few MB in size, but this method has its flaws.
If there’s any problem with your Internet connection or with AVG’s servers, your installation might fail, and you’ll get error 0xc0070643.
To avoid this problem, it’s recommended that you try using an offline installer.
This installer is significantly larger in size, and it will take you a couple of minutes more to download the setup file, but you should be able to avoid this error completely by using this method.
You can download the offline installation from AVG’s website or from a reliable third-party source.
Keep in mind that offline installation might be hidden in AVG’s download section, so you’ll need to look carefully for it.
5. Remove AVG entries from the registryAccording to users, they were unable to install AVG due to problems in their registry.
Apparently, there are some AVG instances in their registry that can prevent AVG from installing, and in order to fix that, you need to remove those instances manually.
Changing your registry can lead to system instability if you’re not careful, therefore we strongly suggest that you export your registry and use that file as a backup in case anything goes wrong.
To fix AVG install error 0xc0070643, do the following:
2. Registry Editor will now start. In the left pane, navigate to HKEY_LOCAL_MACHINESOFTWAREAVG
4. Close Registry Editor.
After closing Registry Editor, try to install AVG again and check if the problem is resolved.
6. Check your permissionsSometimes error 0xc0070643 can occur if you don’t have the necessary permissions to access the installation folder.
In order to install AVG, SYSTEM needs to have certain privileges. To do that, follow these steps:
Expert tip:
Antivirus tools are necessary if you want to keep your PC protected from malicious users, but it’s usually a bad practice to have multiple antivirus tools or firewalls installed.
Different security tools can sometimes interfere with each other, and in some cases, security tools can even prevent you from installing AVG antivirus.
According to users, AVG install error 0xc0070643 is caused by other antivirus tools, so before you try to install AVG, be sure to disable or uninstall other third-party antivirus or firewall tools.
Users reported that the Comodo firewall was interfering with AVG installation, but keep in mind that almost any third-party tool can cause this problem to appear.
8. Make sure that you have the necessary filesAccording to users, they were unable to install AVG due to 0xc0070643 description: event exec_finished error message.
This error is caused by missing files related to Visual C++ Redistributable for Visual Studio 2012 Update 4.
To fix the problem, make sure that you download the necessary files and install them.
Users reported that Visual C++ Redistributable for Visual Studio 2012 Update 4 was causing the problem on their system, but you might have to download a different version for your PC.
All the necessary files are available for download from Microsoft’s website.
9. Make sure that you have enough space on your C driveFew users reported 0xc0070643 description: event exec_finished error message while installing AVG antivirus, and according to them, this message was caused by the lack of hard drive space.
Users reported that the installation error was resolved after freeing some space on their C drive.
Apparently, you need to have more than 4GB of free storage space on your C drive before you can install AVG on your PC.
We have to mention that AVG doesn’t take 4GB of storage space, but it requires this space to be available on your C drive in order to work properly.
10. Change AntivirusIn case you’ve tried out all of the solutions, yet nothing seemed to help, there’s always the option of changing AVG Antivirus with an entirely new antivirus tool.
That being said, know that the market is full of such tools, some of which offer a free version, or even a free trial with full capabilities for you to test out.
ESET Internet Security is among our top recommendations because it offers real-time protection on all fronts while being lightweight. It is easy to use and has one of the highest detection rates, plus it offers tons of useful features such as online payment support, parental controls, and webcam protection.
Fix – AVG install error 0xC007277BRun setup as administrator
Users reported AVG installation error 0xC007277B, and according to them, you can easily fix this and some other installation errors simply by running AVG setup as administrator.
After doing that, the installation should start with administrator privileges and you won’t have any problems with it.
Fix – AVG install error 0x80070091Solution: Remove AVG installation directories
If you can’t install AVG due to install error 0x80070091, you need to remove AVG installation files. To do that, delete the following folders:
C:Program FilesAVG
C:Program Files(x86)AVG
Instead of removing these folders manually, you might want to use the AVG Remover tool that will scan your PC and remove most AVG-related files from it.
Fix – AVG install error 0x6001f916, 0xe001f90b, 0x6001f90b or 0xe001f916Restart your PC
If encounter 0x6001f916, 0xe001f90b, 0x6001f90b or 0xe001f916 error during AVG installation, it means that you need to restart your PC to complete it.
After restarting your PC, the installation will be completed and AVG antivirus will be installed to your PC.
Fix – AVG install error 0xe001d026 or 0xc00700652Disable any additional installations
Install error 0xe001d026 or 0xc00700652 appears if you have another installation running in the background.
To install AVG properly, you need to be sure that there are no additional installations running in the background.
Almost any installation can cause any of these errors to appear, so be sure that nothing is updating or installing in the background before you try to install AVG.
Fix – AVG install error 0xe001f915Start AVG installation again
Several users reported error 0xe001f915 while installing AVG. This error code usually appears if the installation is stopped by a user or another application.
This error can also appear if a certain component of AVG installation is stopped. This isn’t a serious error, and in order to fix this problem, you just need to restart the AVG installation.
Fix – AVG install error 0xe001d028Remove problematic software
If you encounter error 0xe001d028 while installing AVG antivirus, it means that you have one or more applications that are in conflict with AVG.
Keep in mind that other third-party applications can interfere with AVG installation and cause 0xe001d028 error to appear.
AVG has a list of problematic applications and this list includes the following:
Ashampoo Firewall FREE
Better File Rename
BeTwin VS
Eset Smart Security 4
Lock Folder XP
Malwarebytes’ Anti-Malware
PC MACLAN
PC Tools Antivirus
Sunbelt Personal Firewall
System Protect
Webroot Spy Sweeper
This is the list of problematic applications that don’t work with AVG antivirus according to AVG, but there might be also a few other applications that aren’t included in the list.
If you have any of these problematic applications on your PC, you can try updating them and check if that fixes the problem.
If the issue still persists, you need to uninstall these applications and try to install AVG again.
Fix – AVG install error 0xe0060006Use the AVG Remover tool
Error 0xe0060006 or 0xE0018D06 usually appears if AVG installation is failing, which means that there’s a problem with AVG installation file.
To fix this problem, you need to run the AVG Remover tool and remove your current AVG installation. After that, try to install AVG again.
AVG is a great antivirus tool, but as you can see, there can be some issues while installing AVG. If you encounter any AVG install errors, be sure to try some of our solutions.
Was this page helpful?
x
Start a conversation
Outlook Email Fails After Windows 10/11 Upgrade
Outlook email fails after Windows 10/11 upgrade [Fixed]
915
Share
X
X
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
0
readers this month.
Email is a crucial part of our lives and it can be quite frustrating for you if you find yourself not being able to send emails.
Speaking of which, it seems that Outlook won’t send emails after upgrade to Windows 10, so let’s explore this issue.
Users have reported that they are unable to send emails using Outlook on Windows 10, and this issue seems to affect various versions of Outlook.
In order to fix this issue, we have a couple of solutions for you.
What can I do if Outlook email fails? 1. Change your email clientWe know that switching to a different email client isn’t easy, especially if you’re used to the same Outlook for a long time.
However, if none of these solutions help, maybe you should consider switching to an alternative email client.
There are many free ones available and most of them will do perfectly as an Outlook replacement. We would strongly suggest you Mailbird as one of the leaders on the market.
It is a friendly user choice and best of all, it has many great features that will be very helpful in mailing management and using all your favorite apps from one place.
Mailbird
When Outlook email fails after a recent upgrade, the well-designed Mailbird is a great alternative to try out.
Get it free Visit website
2. Run System File Checker scan
When the Command Prompt opens you need to type sfc /scannow.
Press Enter and wait for the process to complete. System File Checker can take about 20 minutes on a regular hard drive, so make sure that you do n0t interrupt it.
When the scan finishes it will inform you whether it was successful or not.
Restart your computer and check if the problem is solved.
If you’re not familiar System File Checker is a scan that will scan your Windows 10 for any corrupted system files, and it will repair those files if possible.
To perform a System File Checker scan, complete the above steps.
scannow command has stopped before the process finished? Don’t worry, we’ve got an easy fix for you.
3. Perform a clean install of Windows 10If the System File Checker was unable to help, maybe you should perform a clean install of Windows 10.
Just make sure that you create a backup for your important files and not delete them by accident. In that regard, use these great local data backup software tools.
Reinstalling Outlook might also help. If you’re not sure how to do this, ask someone to help you out, or hire someone to do it for you.
Also, keep in mind that the above solutions are ideal when no images appear in emails after Windows 10 upgrade. That’s a similar issue that many Outlook 2010 complain about.
Was this page helpful?
x
Troubleshoot Issues After Reconnecting Microsoft Outlook Client To Outlook.com
All Microsoft-related mail accounts were shifted to chúng tôi much earlier, as a part of their upgrade process. As a mandatory part of the migration, users would have to reconnect their Outlook desktop email clients to chúng tôi Not doing so, would mean that the syncing of the emails would stop.
If you face problems after upgrading and reconnecting Microsoft Outlook desktop client to chúng tôi web app, on your Windows PC, then this post will help you troubleshoot the issue.
Troubleshoot issues with chúng tôi migrationTo resolve it, go to chúng tôi and set your chúng tôi email ID as your primary alias. Remove all other email ID’s.
Repeated credential prompts on Outlook for chúng tôi connected accountsWhile repeated credential prompts is a known issue with Outlook clients (for all later versions), if it occurs after the migration to chúng tôi it might be a problem with the 2-step verification. Before trying the usual steps like using the SARA Tool to fix Outlook & Office 365 problems, deleting Windows credentials, rebuilding the profile, etc., check if you have created an App Password to add the account in Outlook.
Unable to send emails from 3rd party email ID’s when connected to chúng tôi primary accountWhen the user’s Outlook for Windows is set with chúng tôi as its primary account, the user won’t be able to send emails with third-party email ID’s like Gmaill, yahoo, etc. This is a feature of the design. The best workaround would be to change the primary account. However, the user could send emails with @Outlook, @Live and @Hotmail email IDs. The purpose behind this setup is clearly to promote the use of Microsoft’s own products.
Recipients receive a chúng tôi file attachment along with the mailThis issue is under investigation. The recipient receives a file titled chúng tôi along with the usual mail. Though not resolution has been mentioned by Microsoft yet, it is known that it doesn’t happen when the mail is sent from chúng tôi This could be used as a workaround meanwhile.
Company’s name missing in contacts upon syncing to serverWhile no resolution has been mentioned for the same, one best thing that could be done is to add the details of the crucial contacts on chúng tôi (the site) itself. Or we could try to sync Outlook to the server again if it works.
The sender’s email gets added to the ‘To’ field automatically while sending the mailWhen adding multiple recipients to a mail, the sender’s own email ID gets added to the ‘to’ field automatically. It’s a known bug, the solution of which is yet to be found. The best that could be done as a workaround for the present is to delete the surplus email ID manually.
Unable to send email to a Contact Group in OutlookWhen attempting to send a mail to a contact group, Outlook gives the error “An unexpected error has occurred.”
Microsoft has not been able to find a fix for this as of the present, but the contact list could be expanded and the email could be sent to the list of IDs.
From field always shows chúng tôi account’s email IDFor those who have multiple accounts associated with their Outlook 2013 or Outlook 2023 for Windows, the from field always defaults to their chúng tôi email ID when they try to send emails from their other accounts.
Since the issue is with the build and there doesn’t seem to be a fix, a couple of workarounds could be tried.
In case the issue doesn’t bother much and the user uses his/her personal accounts rarely, the ‘from’ field could be changed every time before sending the mail.
If you need a long-term workaround for this problem, create an empty Outlook Data File and restart the Outlook for Windows client.
Mac systems: Mac systems do not use the Outlook for Windows client. Thus they do not need to be re-connected to chúng tôi This procedure is only for Outlook for Windows desktop clients.
Data transfer: All data stored on the server would be migrated to chúng tôi However, drafts and outboxes would probably get deleted since they are stored on the system locally. You could back them up if needed.
Auto-complete addresses: Anything that happens to these lists would be similar to the action upon re-building a new Outlook profile. In usual cases, chúng tôi would pick up email addresses from the list of ID’s you have mailed to.
While no product is perfect, Microsoft is working hard toward making this transition as smooth as possible for its users.
How do I troubleshoot Outlook connectivity issues?If you experience connectivity issues with Outlook, the first thing that you should do is check your internet connection. Restart your WiFi router and see if it helps. Also, make sure that you are using the latest version of Outlook. Repairing Microsoft Office can also help to fix issues.
What is the solution for Outlook not responding?If Outlook is not responding, keeps crashing, or has stopped working, check if any add-ins are causing the conflict or not. To check for conflicting add-ins, you have to launch Outlook in Safe Mode. You can also use some fixes, like cleaning your Outlook profile, disabling Hardware Acceleration, etc. You can also run the Inbox Repair Tool and see if it helps.
See this post if you receive a The operation failed, An object cannot be found message.
How To Troubleshoot Common Audio Issues In Windows 11/10
Audio issues on Windows can result from a hardware-related issue like a damaged sound card or a software-related issue like a corrupt driver. Microsoft frequently rolls out updates to fix a lot of the software-related issues, but you can also troubleshoot those issues yourself. If you’re on Windows 10 or 11, and facing audio issues, this guide will help you find a fix.
Before you start troubleshooting, try restarting your PC. In some cases, a reboot will fix your problem without having to tinker with any settings on your Windows PC. For instance, a Windows update may have put the audio drivers on standby until you reboot. If a reboot doesn’t work, try the following fixes.
Table of Contents
Check Cables or Wireless ConnectionsBefore changing settings on your Windows PC, double-check if the audio cables are inserted properly into the PC. It’s best to disconnect and reconnect all devices to make sure there are no loose connections. While you’re at it, also check your cable for physical damage. If the cable is damaged, you may need to replace it.
Check if your device is paired properly with your PC. If in doubt, just remove the device and pair it again. You can remove the device by selecting the vertical ellipsis at the right of a device and selecting Remove device.
Check the Volume MixerWindows allows you to adjust volume app-wise. Even though the sound icon in your taskbar may not show the mute symbol, you could’ve still knowingly or unknowingly changed the volume for a particular app.
Doing this will take you to the Settings app. You’ll be able to adjust the volume for all apps from the Apps section.
If the volume for any of those apps is closer to 0, unmute it. Bring it up to 100 just to test it and see if that fixes the sound problem.
Check the Active Output DeviceIf you’ve connected more than one audio device to your PC, it may be playing the sound on a different device than the one you’re using. This may be particularly true if you’ve connected the audio device using a USB or HDMI cable because you’ll need to set those devices as default yourself.
At the top of the window, you’ll see an option to Choose where to play sound. Select the appropriate default audio device and check if that fixes the audio problems on your PC. However, you can also play sound on multiple devices at the same time.
You can also test the audio when you set the default device by selecting the relevant audio device and selecting the Test button on the next screen.
Use the Built-In Audio TroubleshooterWindows has several built-in troubleshooters, including an audio troubleshooter that can determine and fix the problem automatically. The built-in troubleshooters aren’t always effective, but it’s a good option to try before you try more intrusive fixes.
Follow the on-screen instructions and let Windows attempt to find and fix issues.
Update, Reinstall, or Roll Back Audio DriversIf your sound drivers have become outdated, corrupt, or been removed, you might not be able to get any audio output. You can fix audio problems caused by a driver by simply updating or reinstalling them. Even without an audio problem, it’s best to update drivers every once in a while.
To update or reinstall a driver, you’ll need to use the Device Manager. Press Win + R, type chúng tôi , and press Enter to launch the Device Manager. Search for a category called Sound, video, and game controllers and select the tiny arrow to its left to expand the list.
In many cases, you’ll see a Realtek audio driver, but other devices may be listed separately. You can uninstall all devices one by one and then select Action from the ribbon at the top, and select Scan for hardware changes.
Select Browse my computer for drivers and select the driver files from your PC.
In some cases, though, a driver update may be faulty. If your playback device was working fine until you updated the device driver, you can roll back the driver and use the previously installed device driver. Note that you’ll have this option only if the driver has been updated at least once and Windows still has the older driver that it can roll back to.
Disable Windows Audio EnhancementsWindows Audio Enhancements is a built-in feature that can improve the audio quality on Windows PCs. However, they can also cause sound issues on some PCs. Usually, the fix is to simply disable enhancements.
Restart the Windows Audio ServiceIf you’re still trying to fix sound on your Windows 11 or 10, it may be worthwhile to restart the Windows Audio and Windows Audio Endpoint Builder services. The services may also have automatically disabled itself in some cases, leaving you with no sound.
Press Win + R, type chúng tôi , and press Enter to launch the Services console. Search the list for a service called Windows Audio. You can do this by pressing Ctrl + F, typing windows audio in the search box, and pressing Enter.
If the service is already running, select the Stop button and then the Start button to restart it.
Also, check the Startup type. If it’s set to anything but Automatic, change it to Automatic. Once you’re done, select OK. Repeat the same process for the Windows Audio Endpoint Builder service.
Windows Audio Problems FixedDevice Driver Descriptor Request Failed On Windows 10 (Error Fixed)
Device Driver Descriptor Request Failed On Windows 10 (Error Fixed)
It is evident to know that the “USB device descriptor request failed” error is caused mainly by an out-of-date or a faulty device driver. In such cases, you should always choose a driver updater software. One of the best driver updater software available in the market is Smart Driver Care
Advanced Driver Updater is a nifty tool that scans your entire Windows 10 PC for all the incompatible or out-of-date drivers and updates them. So if you are facing an unknown USB device descriptor request failed error, download Smart Driver Care, and resolve the problem in no time.
What is a Device Descriptor?In common language, a device descriptor encompasses all the information about the USB device. To work properly, each USB device should be able to provide the Operating System with a correct device descriptor, i.e. the correct and complete information about the USB device.
idVendor: This is commonly known as Vendor ID and is assigned to every company that manufacturers USD drives.
Idproduct: This is the product ID assigned to the products manufactured by different vendors and is represented by a 16-bit digit.
Probable Reasons Behind Unknown USB Device Descriptor Request Failed Error:Now that we know what USB device descriptions are, let’s see the common reasons behind a request for the USB device descriptor failed error.
A faulty USB device driver.
An out-of-date USB driver.
Out-Of-Date BIOS.
USB driver infected by malware or virus.
USB driver is not found and hence cannot interact with the Operating System.
USB Device Descriptor Request Failed Error Fixed:Let’s continue reading about the different methods using which you can easily resolve device descriptor request failed windows 10 error. Before heading to the more technical solution, we will be going through the easy hacks to resolve the error.
Disconnect the USB device, Restart your Windows 10 PC and then connect the USB drive again to see if the problem is resolved.
Try plugging the USB Flash Drive to another USB port and see if it works.
Try to use the USB drive on a different PC to check if there is a problem with the device driver or the device.
Try removing the main power of the PC and then plugging it again.
These are some common resolutions for USBdevice_descriptor_failure. However, if none of the above workarounds work, you can proceed to the next step.
Also Read: How to Fix Realtek HD Audio Manager Missing from Windows 10
Reinstall The USB Device Driver:In case the above solution vent in vein and you still get the device descriptor request failed windows 10 error, you can try reinstalling the device driver. To do so:
On your Windows 10 PC, open the Device Manager by typing Device Manager in the Search bar and press Enter.
Here, you will find a Yellow Exclamation mark associated with the faulty USB Device Driver.
Restart the device, attach the USB.
Post this navigate to Device Manager again and let Windows, download the driver automatically or do it through the vendor’s site manually.
Well, this was how to solve an unknown USB device descriptor request failed error manually. However, if you do not have time and expertise to do it on your own, you can simply choose one of the best driver updater software available and let them do the work for you.
Update the USB Device Driver With Smart Driver Care:Smart Driver Care by Systweak Software is a one-stop solution to all the driver-related problems you face with your Windows 10 PC. It effectively scans for all the faulty/incompatible/out-of-date drivers and updates them with minimal effort.
You can download the free version of Smart Driver Care and update the faulty drivers one by one or choose to purchase the fully functional version and update them all at once.
Follow the steps below to resolve Device Driver Descriptor request failed On Windows 10 error.
Download Smart Driver Care and install it.
After you have downloaded the latest driver, Restart your Windows 10 PC.
So guys this was how you can easily resolve Device Driver Descriptor Request Failed Error On Windows 10. While many of us can do it manually, others may choose to simply use a third-party software to do the work for them.
Next Read:
Show/Hide WhatsApp Status.
Find Someone On Snapchat Without Username
How To Split Screen In Android.
Quick Reaction:About the author
Pragya Dani
Update the detailed information about Windows 10 Kb3124200 Issues: Failed Installs, Broken Apps, Outlook & Edge Not Opening on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!