Trending November 2023 # Windows 10 V1903 Breaks Network Drivers, Fixing Them Is Not Easy # Suggested December 2023 # Top 14 Popular

You are reading the article Windows 10 V1903 Breaks Network Drivers, Fixing Them Is Not Easy updated in November 2023 on the website Cancandonuts.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Windows 10 V1903 Breaks Network Drivers, Fixing Them Is Not Easy

Windows 10 v1903 breaks network drivers, fixing them is not easy

800

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

readers this month.

With the Windows 10 May Update, there came a series of bugs and issues that are hard to digest for some. Microsoft is working on solving all of them, but in the meantime users are facing serious problems.

One of them is the lack of internet connection after updating to v1903. Although the company already resolved some connection problems, others remain.

One user describes the problem as follows:

I’ve just updated my PC to the latest Windows update using the Update Assistant. It was working ok, but now my router says that Ethernet is not connected and I can’t browse the Internet anymore. Anyone else with that? (Realtek onboard)

This is not the only Realtek bug the update brings, but it’s one that remains unresolved. The other big Realtek issue that Microsoft acknowledged is with card readers that prevented the installation of the update.

READ ALSO: Windows 10 v1903 brings BSoD errors for many

Driver issues can break your Internet connection

To confirm that the problem is triggered by the update itself, and not just from your router, disabling and re-enabling it from the adapter options could do the trick.

If the router is fine, than the problem has much deeper roots and it’s most likely triggered by the Windows 10 v1903 code.

A possible cause could be the pushing of DCH versions of drivers through the new update. An incompatibility issue or an overlap of the different driver versions can be the root this problem.

Go to Device Manager and update your drivers. If that doesn’t change anything, uninstall the old driver, go to the manufacturer’s website and download the latest Ethernet drivers and install them.

Here’s how to do it:

Download and install the Outbyte Driver Updater app.

Launch the software.

Wait for the app to detect all incompatible drivers.

Afterward, it will show you a list of the drivers found to select the ones to Update or Ignore.

Restart your PC to ensure the applied changes.

Outbyte Driver Updater

Use this software and solve all driver-related issues from your PC.

Free trial Download now

Disclaimer: You may need to upgrade the app from the free version to perform specific actions.

If you didn’t update to v1903, be sure to read all the info available and find the known bugs and issues.

Have you encountered a similar problem with Windows 10 May update? How did you solve it?

Still experiencing troubles? Fix them with this tool:

Fixed – Windows 10 Could Not Reconnect All Network Drives

A network drive or a mapped drive is a storage device present on the Local Area Network present within home or business. It could be located on a NAS (Network-attached storage) or a server. It mostly appears with locally installed drives. However, with network drives, users can be given permissions to edit, copy, delete, and even upload data.

Why Windows 10 Could Not Reconnect All Network Drives At Boot Up?

If the problem is persistent, here are some measures you can undertake to resolve the issue.

Ways To Fix Windows Could Not Reconnect All Network Drives – 1. Using The Group Editor Policy

1. Open the run dialog box by pressing Windows + R keys

2. Type chúng tôi

4. Enable Always wait for the network at computer startup and logon

6. Restart the computer

2. Disconnect The Drive

3. Select Disconnect network drive

3. Use Command Prompt and Powershell Scripts At The Start-Up

If the above methods don’t seem to work, you can run scripts at the startup which would further help you map drives. Here we will give you scripts for both the Command Prompt as well as the Powershell.

Also Read: Difference Between PowerShell & CMD in Windows 10

Note: You must have an active network connection when following the steps mentioned below –

Command Prompt

1. Open a Notepad

2. Copy and paste the following script

3. Name this file as cmd and save it to any desired location

Powershell

1. Open another Notepad

2. Copy and paste the following script

$i=3

while($True){

$error.clear()

foreach( $MappedDrive in $MappedDrives)

{

try {

New-SmbMapping -LocalPath $MappedDrive.LocalPath -RemotePath $MappedDrive.RemotePath -Persistent $True

} catch {

Write-Host "There was an error mapping $MappedDrive.RemotePath to $MappedDrive.LocalPath"

}

$i = $i - 1

if($error.Count -eq 0 -Or $i -eq 0) {break}

Start-Sleep -Seconds 30

}

3. Save the script as MapDrives.ps1. It is essential that you use this name.

After you have created the scripts, head to your StartUp folder and follow the steps mentioned below –

4. Navigate to %ProgramData%MicrosoftWindowsStart MenuProgramsStartUp

5. Copy and paste the cmd script in this folder

6. Now head to your system drive and create another folder by the name Scripts

7. In this folder paste the Powershell script

8. Reboot your computer

9. You should now be able to see your mapped drives with no hassles.

4. Use The Task Scheduler

Task Scheduler is an alternative if you don’t want to use the StartUp folder. As the name suggests, Task Schedular lets you run and execute the scripts. Here are the steps using which you will be able to use the Task Scheduler to resolve the “Could not reconnect all network drives” in Windows –

3. By default, you will enter the General tab. Here enter the name of the task such as mapping network drive script

5. Check the Run with highest privileges

9. Choose Start a program from the Action drop-down and then choose Powershell.exe

10. Enter the following command in the box –

11. In Start in enter the following location to enter the location of the PowerShell script

%SystemDrive%Scripts

13. Now, go to the Conditions tab and make sure that Start only if the following network connection is available is checked

14. From the dropdown select Any connection

5. Disable The Appropriate Option At The Start-Up Using The Registry Editor

At the outset, we’d like to emphasize that it is always a good practice to create a backup of registries before making any modifications to them. With the backup handy even if something goes wrong, you can restore your existing registries and avoid any mishaps. With that out of the way let’s see how we can resolve the “Could not reconnect all network drives” in Windows using the registry editor –

1. Open the Run dialog box by pressing the Windows + R keys

2. Type Regedit

3. Navigate to the below-mentioned path –

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlNetworkProvider

5. Save the changes and close the editor

6. Reboot your system

Wrapping Up

Fixed: Vudu Player Is Not Working On Windows 10

FIXED: VUDU Player is not working on Windows 10

689

Streaming services are at the peak, with a few big players and numerous small but still popular services. And one of the specialized services quite popular in the United States is VUDU, with an amazing selection of movie titles. However, it does have a few issues, as the Windows 10 app is subpar and the web-based player is frequently malfunctioning. We conducted research and provided you with the most common troubleshooting steps in case VUDU player is not working on Windows 10.

How to troubleshoot VUDU player issues on Windows 10 Solution 1 – Clear browser cache

Firstly, double-check your connection and make sure you’re using a wired one. An ethernet connection is always a preferable option over Wi-Fi, especially when streaming.

In addition, disable all VPN/proxy solutions as they seemingly won’t work with VUDU. If you’re from an unsupported area, you’ll hardly be able to use it.

Since there are two ways you can access the VUDU player these days on Windows 10, we decided to tackle both options. This solution, of course, applies to a browser-based player. If you’re experiencing any streaming issues, consider trying them out first.

As any browser tends to pile up a lot of the cache and store it locally. This will, eventually, downgrade the performance. And it’s especially bad when it comes to online streaming.

That’s why we highly recommend clearing the browsing data (with passwords being an exception) and moving on. If you’re not sure how to clear browser’s cache, follow these instructions:

Google Chrome and Mozilla Firefox

Microsoft Edge

Solution 2 – Reset the app to factory values

On the other hand, if you’re using the app, the analogous action is to reset it to factory settings. This might help for various reasons, the main one being a corruption of locally cached files. So, prior to reinstalling the VUDU app, try resetting it.

We’re well aware of a plethora of issues this app brings to the table, but if it’s already your first choice, you might as well try and do everything in your power.

Expert tip:

Solution 3 – Rollback Adobe Air

While the VUDU app is certainly bringing a lackluster service, there are still some exterior reasons at play. If VUDU player isnt’ working on Windows 10, the Adobe Air version might be the cause.

Namely, based on reports we collected, it looks like certain versions of Adobe Air won’t work with VUDU player. This suggests that rolling back to an older version might relieve you off of streaming issues.

Here’s what you need to do:

In the Windows Search bar, type Control and open Control Panel.

Choose Uninstall a program.

Uninstall the Adobe Air client.

Navigate here and download an older runtime version of the Adobe Air client.

Install Adobe Air and try streaming with the VUDU player again.

Solution 4 – Reinstall the app

Here’s how to reinstall the VUDU player app:

Solution 5 – Try an alternative browser

If one browser doesn’t work, try a different one. Based on reports, the majority of streaming issues were somewhat related to Microsoft’s browsers — Internet Explorer and Edge. That’s why we suggest trying one of the best browsers for Windows that are both safe and fast.

Solution 6 – Go for SD quality

Finally, if you’re unable to load a certain title in a preferred high resolution (HDX), try downgrading and it should work. We’re aware that this isn’t a solution per se, but some vocal users experienced crashes solely on these settings. And this is something VUDU support needs to look into. Until then, try with lower quality and it just might work.

Have in mind that the official requirements for high-quality streaming are 11 MB/s. If you don’t meet the requirements, chances are the stream won’t start.

Was this page helpful?

Start a conversation

Best Free Wifi Network Scanner Tools For Windows 11/10

In today’s cyber world, we all are wholly dependent on WiFi technology to access internet services. Be it cafeterias, classrooms, airports, libraries, or any region; we promptly ask for a WiFi connection so that we can have our devices connected to the internet wirelessly. But one thing we all need to be cautious about is that by doing this, our device will become a part of an unsecured Wi-Fi network.

WiFi Network Scanner Tools for Windows PC

Wi-Fi is the most popular technology that uses radio waves to transmit information from your device to a router which then transmits data to the Internet via Ethernet. However, being part of some random unsecured network is dangerous as data is transmitted over the wireless networks which are unsecured. The networks are highly susceptible to eavesdropping and security attacks. While there are a lot of issues when it comes to Wifi security, the apt way to protect from security vulnerabilities is to secure WiFi Routers.

Nowadays there are plenty of Encryption schemes that offer security and protection against most cyber attacks and aid in preventing someone else from reading the data within range. Although securing WiFi routers involves complex tasks, routers provide you with the provision to encrypt data of the information signal transferred across the network. In this way, it is strenuous for hackers to read the information signals in the network thus protecting the confidentiality of the data.

That being said, WiFi Network Scanner comes in handy to enhance network security protection from security breaches. Wireless Encryption Protocol (WEP) and Wi-Fi Protected Access (WPA) are widely used encryption protocols that are part of IEEE 802.11 wireless networking standards. These protocols help in the protection of security by encrypting data over radio waves in order to preserve the confidentiality of the data.

You may be wondering about the need to use the WiFi Scanner tool when your router is already equipped with a firewall. Well, a firewall just prevents intruders from having access to your system. It doesn’t play any role in securing network traffic. Encryption tools provide ways to protect data so that it’s difficult for hackers to read the data transmitted over a network. In this segment, we bring you some of the best free WiFi Network Scanner software for Windows 10.

1] Vistumbler

Vistumbler is a free open source WiFi Network Scanner tool that does a tremendous job of scanning entire wireless networks within the range of WiFi routers. Vistumbler has a size less than 1MB and is available for Windows 10 and its prior versions. The tool uses Windows Native WiFi API to gather wireless information and locate access points. The tool verifies network configurations and helps in detecting unauthorized access points. Vistumbler finds the Wireless LANs using WLAN standards like IEEE 802.11a, 802.11b, and 802.11g. The tool also finds the cause for any interfaces produced in the network. Download it here.

2] inSSIDer

Inssider is a free open source tool for Windows that scans the best channels for WiFi networks. It helps in curtailing interference from the nearby network. Inssider assists in determining the configuration issues so that you can limit the number of dropped connections. The tool also uses encryption protocols to minimize security breaches and enhance the efficiency of the network. The Inssider is available for Windows 11/10 and its prior versions. Download it here. You can use inSSIDer free for real-time visualization.

3] SoftPerfect Network Scanner

SoftPerfect Network Scanner is a freeware that provides basic information on all these parameters. The tool pings computer scans for listening TCP ports and shows what types of resources are shared on a network (including system and hidden). In addition, you can mount shared resources as network drives, browse them using Windows Explorer, filter the results list and more.

4] Kismet

Kismet is a widely used WiFi Network Scanner tool that detects for any network intrusion. The tool can sniff network traffic of 802.11a, 802.11b, and 802.11g. It also supports raw monitoring mode. The tool supports multiple source capture and provides plugin architecture to expand core features. The Kismet also supports lightweight remote capture. Download it here.

5] Meraki WiFi Stumbler

Cisco Meraki WiFi Stumbler is a free tool that provides detailed information about the encryption used for wireless networks and SSIDs. The detailed reports help to get information about MAC address, access point, wireless channel, and even signal strength. The best thing about using Meraki Stumbler is that it doesn’t require you to install tool, but instead you can run it anywhere and wherever you require without installation. The tool is suitable for network troubleshooting, finding miscreant APs and you can run it on your system even when you are offline. Download it here.

TIP: Also, take a look at 10-Strike Network Scanner and MiTeC Network Scanner.

Your suggestions are most welcome.

Related read: Free Wireless Networking Tools For Windows.

Windows Installer Not Working Properly In Windows 11/10

Windows Installer is a core service that manages installations of everything in Windows, including apps, features, and many other things. If, for some reason, it breaks, you will be stuck with new installations and even upgrades of apps.

Windows Installer (msiserver) not working

In this post, we will share a list of error codes – and their solution, some pointing to our existing solution – and how to solve them.

1] Run Program Install & Uninstall Troubleshooter

The first thing we would suggest is to run the Program Install and Uninstall Troubleshooter to repair issues that block program installation or removal because of corrupted registry keys. This program will fix corrupted registry keys on 64-bit operating systems, which control the update data, problems that prevent existing programs from being completely uninstalled or updated, and problems that block you from uninstalling a program through Add or Remove Programs (or Programs and Features) in Control Panel

2] Start the Windows Installer Service

In the Run prompt, type MSIExec, and then press Enter.

If you get the Windows Installer window which tells you everything about MSIExec, then it’s all good.

If you get an error, you might have to start it manually.

You can also run chúng tôi to open Windows Services and go to Windows Installer, and restart it.

3] Windows Installer Service could not be accessed

You may see the message Windows Installer Service could not be accessed. This usually happens if the Windows Installer Engine is corrupted, installed incorrectly, or disabled. You will need to fix either the corruption or fix the configuration or enable it. The linked post also solves the issue where the Windows Installer service could not start, and gives the message as Error 5, Access is denied.

4] There is a problem with this Windows Installer package

If the Windows Installer package faces unstable network access during the uninstallation or installation process, sometimes, the error might appear if you fail to complete the process successfully. The error message might go like “There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.”

5] Windows Installer keeps popping up

Usually, the Windows Installer or chúng tôi runs in the background. You can check in the Task Manager under the list of processes that are running. However, if you see it constantly running, and the Windows Installer keeps popping up, it means it is stuck. It is possible that an installation is not able to complete, and this happens as a result.

Read: Windows Installer Service missing.

6] Installation Package could not be opened

If you are not able to install software that you just downloaded from the internet, and it keeps throwing the error message “Installation Package could not be opened“, then it’s probably a security issue. Windows many a time blocks applications you download from the internet as it does not trust them. You may have to unblock it or disable your antivirus to fix it.

7] Re-register Windows Installer service

If nothing works, the best option in our experience is to re-register the Windows Installer service. The reason why it works great because it fixes registry issues as well, and gets the basic settings ready again.

Launch the command prompt with admin privileges. Type the following commands and hit Enter after each one.

%windir%system32msiexec.exe /unregister %windir%system32msiexec.exe /regserver %windir%syswow64msiexec.exe /unregister %windir%syswow64msiexec.exe /regserver

Close the command prompt, save all your work, and restart your computer.

Check if you are facing Windows Installer issues.

Windows OS maintains a Windows Installer cache. Any files you install are temporarily extracted here and then installed on the PC. If you are deleting files from here manually or during installation or any other program is doing that, you will get an error.

How to check Windows Installer version?

To check the version of Windows Installer on your computer, open the Run box, type msiexec -? and hit Enter. You will see the version mentioned at the top.

How do I fix a corrupted Windows installer?

Since the Windows Installer is a system file, the best way to repair or fix a corrupted Windows Installer is by running the built-in System File Checker. Alternatively, you could search for the latest version of Windows Installer file on the chúng tôi website and download it from there,

Useful link: How to enable Windows Installer logging.

How To Remove Page Breaks And Section Breaks In Google Docs

Page breaks and section breaks in Google Docs allow for greater control over the layout and structure of your content, but they can also cause issues.

If you’ve ever found yourself struggling with awkward page breaks that disrupt the flow of a document or with section breaks that create unwanted whitespace or page numbering issues, you probably know how frustrating they can be.

Table of Contents

In this tutorial, we’ll show you how to remove page breaks and section breaks in Google Docs so that you can regain control over your document’s formatting.

How to Remove Page Breaks in Google Docs

Google Docs makes it easy to add manual page breaks to your documents and push content to the next page without repeatedly pressing the Enter/Return key. There are several ways to do that:

Use the

Ctrl

Enter

(Windows and Chromebook) or

Command

Enter

(Mac) keyboard shortcut.

Tap the

Add

icon and select

Page break

on mobile app (iPhone, iPad, and Android).

However, if you insert a page break that you no longer need or add one accidentally, it’s important to know how to remove it. To delete a page break in Google Docs:

Position the cursor on the start of the section after a page break.

Press the

Backspace

key (Windows and Chromebook) or the

Delete

key (Mac, iOS, and Android). Press

Backspace

Delete

repeatedly if there’s vacant space between the cursor and the page break.

On desktop devices, you can also:

Position the cursor at the end of the final paragraph before the page break.

Press

Delete

(Windows),

Delete

(Mac), or

Alt

Backspace

(Chromebook). Press the key or keys repeatedly if there’s vacant space between the cursor and the page break.

If you want to read through the contents of a Google Docs document without manual or automatic page breaks interrupting the flow, try switching the page setup to the Pageless format. To do that:

Open the

File menu

and select

Page setup

Select

Pageless

Select

The Pageless format also hides elements like headers, page numbers, and watermarks. To switch back to the default Pages format, open the File menu, select Page setup, and choose the Pages tab.

To enable and disable Pageless format on the mobile version of Google Docs, you must:

Tap the

icon (three dots) on the top right of the screen.

Tap

Page setup

Enable the switch next to

Pageless

How to Remove Section Breaks in Google Docs

Like Microsoft Word, Google Docs on desktop devices allow you to add section breaks to documents. There are two types of section breaks:

Section break

(

)

: Starts a section break on a new page.

Section break

(continuous)

: Starts a new section within the same Google Docs page.

Section breaks help separate different sections of your document in Google Docs. However, unlike regular page breaks, it can be frustrating to remove section breaks unless you know how.

To remove a section break in Google Docs:

Position the cursor at the end of the paragraph before the section break.

Press

Delete

(Windows),

Delete

(Mac), or

Alt

Backspace

(Chromebook).

If you have trouble locating section breaks in a document:

Open the

View

menu and select

Show section breaks

Show non-printing characters

. You should then see section breaks throughout the document as dotted lines.

Position the cursor above the section break’s horizontal line and press

Delete

(Windows),

Delete

(Mac), or

Alt

Backspace

(Chromebook) to remove it.

To hide section breaks again, open the Insert menu and remove the checkmark next to the Show section breaks/Show non-printing characters option.

Take Control Over Your Google Documents

Removing unwanted page breaks and section breaks in Google Docs is crucial for creating a polished and well-organized document. Although it may take a few attempts to get the hang of the methods above, you’ll soon be able to do it with ease.

Update the detailed information about Windows 10 V1903 Breaks Network Drivers, Fixing Them Is Not Easy on the Cancandonuts.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!